Download or read book Proceedings of the 20th Congress of the International Ergonomics Association IEA 2018 written by Sebastiano Bagnara and published by Springer. This book was released on 2018-08-10 with total page 2141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), held on August 26-30, 2018, in Florence, Italy. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Ergonomics in Design, Activity Theories for Work Analysis and Design, and Affective Design.
Download or read book Design in the Era of Industry 4 0 Volume 3 written by Amaresh Chakrabarti and published by Springer Nature. This book was released on 2023-07-24 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases cutting-edge research papers from the 9th International Conference on Research into Design (ICoRD 2023) – the largest in India in this area – written by eminent researchers from across the world on design processes, technologies, methods and tools, and their impact on innovation, for supporting design for a connected world. The theme of ICoRD’23 has been ‘Design in the Era of Industry 4.0’. Industry 4.0 signifies the fourth industrial revolution. The first industrial revolution was driven by the introduction of mechanical power such as steam and water engines to replace human and animal labour. The second industrial revolution involved introduction of electrical power and organised labour. The third industrial revolution was powered by introduction of industrial automation. The fourth industrial revolution involves introduction of a combination of technologies to enable connected intelligence and industrial autonomy. The introduction of Industry 4.0 dramatically changes the landscape of innovation, and the way design, the engine of innovation, is carried out. The theme of ICoRD’23 - ‘Design in the Era of Industry 4.0’ –explores how Industry 4.0 concepts and technologies influence the way design is conducted, and how methods, tools, and approaches for supporting design can take advantage of this transformational change that is sweeping across the world. The book is of interest to researchers, professionals, and entrepreneurs working in the areas on industrial design, manufacturing, consumer goods, and industrial management who are interested in the new and emerging methods and tools for design of new products, systems, and services.
Download or read book Proceedings of the 21st Congress of the International Ergonomics Association IEA 2021 written by Nancy L. Black and published by Springer Nature. This book was released on 2021-05-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), held online on June 13-18, 2021. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Transport Ergonomics and Human Factors, Practitioner Case Studies, Human Factors in Robotics, Manufacturing, Agriculture, HF/E in Supply Chain Design and Management, Aerospace, Building and Construction.
Download or read book Cross Cultural Design written by Pei-Luen Patrick Rau and published by Springer Nature. This book was released on 2023-07-08 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of CCD 2023, constitutes the refereed proceedings of the 25th International Conference on Cross-Cultural Design, CCD 2023, held as Part of the 24th International Conference, HCI International 2023, which took place in July 2023 in Copenhagen, Denmark. The total of 1578 papers and 396 posters included in the HCII 2023 proceedings volumes was carefully reviewed and selected from 7472 submissions. The papers of CCD 2023, Part I address topics related to service and product design for cultural innovation, design for social change and development, sustainable design methods and practices, and cross-cultural perspectives on design and consumer behavior.
Download or read book Fault Tolerant Design and Control of Automated Vehicles and Processes written by Ralf Stetter and published by Springer. This book was released on 2019-02-14 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes strategies, methods, algorithms, frameworks and systems for the fault-tolerant design and control of automated vehicles and processes. Intelligent systems may be able to accommodate inevitable faults, but this ability requires targeted design processes and advanced control systems. This book explains the respective elements involved in automated vehicles and processes. It provides detailed descriptions of fault-tolerant design, not offered in the existent scientific literature. With regard to fault-tolerant control, the focus is on innovative methods, which can accommodate not only uncertainties, but also shared and flexible redundant elements. The book is intended to present a concise guide for researchers in the field of fault-tolerant design and control, and to provide concrete insights for design and control engineers working in the field of automated vehicles and processes.
Download or read book Interdisciplinary Practice in Industrial Design written by Cliff (Sungsoo) Shin and published by AHFE Conference. This book was released on 2024-07-24 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 15th International Conference on Applied Human Factors and Ergonomics and the Affiliated Conferences, Nice, France, 24-27 July 2024.
Download or read book Design and Modeling of Mechanical Systems IV written by Nizar Aifaoui and published by Springer Nature. This book was released on 2020-02-26 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Download or read book Cross Cultural Design Experience and Product Design Across Cultures written by Pei-Luen Patrick Rau and published by Springer Nature. This book was released on 2021-07-03 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 12771-12773 constitutes the refereed proceedings of the 13th International Conference on Cross-Cultural Design, CCD 2021, which was held as part of HCI International 2021 and took place virtually during July 24-29, 2021. The total of 1276 papers and 241 posters included in the 39 HCII 2021 proceedings volumes was carefully reviewed and selected from 5222 submissions. The papers included in the HCII-CCD volume set were organized in topical sections as follows: Part I: Cross-cultural experience design; cross-cultural product design; cultural differences and cross-cultural communication; Part II: Culture, arts and creativity; culture, learning and well-being; social change and social development; Part III: CCD in cultural heritage and tourism; CCD in autonomous vehicles and driving; CCD in virtual agents, robots and intelligent assistants.
Download or read book Design Computing and Cognition 16 written by John. S Gero and published by Springer. This book was released on 2016-12-31 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed and revised versions of papers from the Seventh International Conference on Design Computing and Cognition (DCC'16), held at Northwestern University, Evanston (Chicago), USA, from 27–29 June 2016. The material presented here reflects cutting-edge design research with a focus on artificial intelligence, cognitive science and computational theories. The papers are grouped under the following nine headings, describing advances in theory and applications alike and demonstrating the depth and breadth of design computing and design cognition: Design Creativity; Design Cognition - Design Approaches; Design Support; Design Grammars; Design Cognition - Design Behaviors; Design Processes; Design Synthesis; Design Activity and Design Knowledge. The book will be of particular interest to researchers, developers and users of advanced computation in design across all disciplines, and to all readers who need to gain a better understanding of designing.
Download or read book Design Tools and Methods in Industrial Engineering written by Caterina Rizzi and published by Springer Nature. This book was released on 2019-09-19 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge design methods and tools in industrial engineering, advanced findings in mechanics and material science, and relevant technological applications. Topics span from geometric modelling tools to applications of virtual/augmented reality, from interactive design to ergonomics, human factors research and reverse engineering. Further topics include integrated design and optimization methods, as well as experimental validation techniques for product, processes and systems development, such as additive manufacturing technologies. This book is based on the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, held on September 9–10, 2019, in Modena, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering “Enzo Ferrari” of the University of Modena and Reggio Emilia, Italy. It provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.
Download or read book Emotional Engineering Volume 4 written by Shuichi Fukuda and published by Springer. This book was released on 2016-06-15 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the important role of emotion in a hyper-connected society and how product development and manufacture change. It explores how our work and lifestyle may be affected by forthcoming technologies and presents key research on multisensory informatics, one of the most important tools for making the most of emotion. This fourth volume of the Emotional Engineering Series focuses on the human issues relating to Cyber Physical Systems, or Industrie 4.0, and discusses the important role emotion plays in these smart environments. Introducing related works in the field of multisensory research, which provide the basic tools for becoming context- and situation aware in this imminent revolutionary society, it discusses not only the changes in production and product development this new revolution will bring about, but also highlights how emotion plays a crucial role in making us happy in such a connected society and in bringing about harmonization between human and human, between human and machine and, last but not least, in maintaining a good work-life balance.
Download or read book New Technologies Development and Application IV written by Isak Karabegović and published by Springer Nature. This book was released on 2021-05-11 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development, and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on June 24–26, 2021. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems; smart grids; nonlinear systems; power, social and economic systems; education; and IoT. The book New Technologies, Development and Application III is oriented toward Fourth Industrial Revolution “Industry 4.0, ”implementation which improves many aspects of human life in all segments and leads to changes in business paradigms and production models. Further, new business methods are emerging and transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book The Challenges of the Digital Transformation in Education written by Michael E. Auer and published by Springer. This book was released on 2019-02-28 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the latest research and new perspectives on Interactive Collaborative Learning and Engineering Pedagogy. We are currently witnessing a significant transformation in education, and in order to face today’s real-world challenges, higher education has to find innovative ways to quickly respond to these new needs. Addressing these aspects was the chief aim of the 21st International Conference on Interactive Collaborative Learning (ICL2018), which was held on Kos Island, Greece from September 25 to 28, 2018. Since being founded in 1998, the conference has been devoted to new approaches in learning, with a special focus on collaborative learning. Today the ICL conferences offer a forum for exchanging information on relevant trends and research results, as well as sharing practical experiences in learning and engineering pedagogy. This book includes papers in the fields of: * New Learning Models and Applications * Pilot Projects: Applications * Project-based Learning * Real-world Experiences * Remote and Virtual Laboratories * Research in Engineering Pedagogy * Technical Teacher Training It will benefit a broad readership, including policymakers, educators, researchers in pedagogy and learning theory, school teachers, the learning industry, further education lecturers, etc.
Download or read book Advanced Manufacturing Processes IV written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2022-09-08 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6–9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Download or read book Transdisciplinarity and the Future of Engineering written by B.R. Moser and published by IOS Press. This book was released on 2022-11-15 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of TE2022, the 29th ISTE International Conference on Transdisciplinary Engineering, held at the Massachusetts Institute of Technology in Cambridge, United States, from 5 – 8 July 2022. Transdisciplinary engineering is the exchange of knowledge in the context of an innovation, in product, process, organisation or social environment. ISTE aims to explore and promote the evolution of engineering to incorporate transdisciplinary practices in which the exchange of different types of knowledge from a diverse range of disciplines is fundamental. The theme for the TE2022 conference is the future of engineering, and the 75 papers included here, which have all undergone a rigorous peer-review process, cover a wide range of topics and are grouped under 10 headings: Requirements, Knowledge and Architecture in Engineering; Case Studies; Energy, Environment, and Sustainability; Engineering Teamwork; Digital Engineering; imulation, Optimization, and Analytics; Manufacturing; Policy, Decisions, and Innovation; Engineering Education; Research on TE. The book will be of interest to all those working in the field of engineering today.
Download or read book Papers in ITJEMAST 11 11 2020 written by and published by International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies publishes a wide spectrum of research and technical articles as well as reviews, experiments, experiences, modelings, simulations, designs, and innovations from engineering, sciences, life sciences, and related disciplines as well as interdisciplinary/cross-disciplinary/multidisciplinary subjects. Original work is required. Article submitted must not be under consideration of other publishers for publications.
Download or read book Design Management written by S. Culley and published by John Wiley & Sons. This book was released on 2001-10-10 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient design management solutions for today's new challenges Design Management: Process and Information Issues is a collection of papers presented at the 13th International Conference on Engineering Design in Glasgow, Scotland. One of four volumes, this book highlights the newest developments in design management and the solutions that facilitate innovation. Focused on common challenges within the design process, these papers provide insight gleaned from current and ongoing work to help design and engineering teams meet the increasing demands of the modern product development environment.
