Download or read book Proceedings of the International Symposium on Micro NanoMechatronics and Human Science written by and published by . This book was released on 2005 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2005 International Symposium on Micro NanoMechatronics and Human Science and the Eighth Symposium micro and Nano Mechatronics for Information based Society the 21st Century COE Program Nagoya University written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2005-01-01 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2004 International Symposium on Micro NanoMechatronics and Human Science written by and published by . This book was released on 2004 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Intelligent Robotics Automation and Manufacturing written by S.G. Poonambalam and published by Springer. This book was released on 2012-11-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Intelligent Robotics and Manufacturing, IRAM 2012, held in Kuala Lumpur, Malaysia, in November 2012. The 64 revised full papers included in this volume were carefully reviewed and selected from 102 initial submissions. The papers are organized in topical sections named: mobile robots, intelligent autonomous systems, robot vision and robust, autonomous agents, micro, meso and nano-scale automation and assembly, flexible manufacturing systems, CIM and micro-machining, and fabrication techniques.
Download or read book Advances in Mechanical Engineering written by Vilas R. Kalamkar and published by Springer Nature. This book was released on 2020-06-29 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Advances in Mechanical Engineering (ICAME 2020). The contents cover latest research in several areas such as advanced energy sources, automation, mechatronics and robotics, automobiles, biomedical engineering, CAD/CAM, CFD, advanced engineering materials, mechanical design, heat and mass transfer, manufacturing and production processes, tribology and wear, surface engineering, ergonomics and human factors, artificial intelligence, and supply chain management. The book brings together advancements happening in the different domains of mechanical engineering, and hence, this will be useful for students and researchers working in mechanical engineering.
Download or read book Control Technologies for Emerging Micro and Nanoscale Systems written by Evangelos Eleftheriou and published by Springer Science & Business Media. This book was released on 2011-07-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of the presentations made at the “Workshop on Dynamics and Control of Micro and Nanoscale Systems” held at IBM Research – Zurich, Switzerland, on the 10th and 11th of December 2009. The aim of the workshop was to bring together some of the leading researchers in the field of dynamics and control of micro- and nanoscale systems. It proved an excellent forum for discussing new ideas and approaches.
Download or read book Advances in Computational Algorithms and Data Analysis written by Sio-Iong Ao and published by Springer Science & Business Media. This book was released on 2008-09-28 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computational Algorithms and Data Analysis offers state of the art tremendous advances in computational algorithms and data analysis. The selected articles are representative in these subjects sitting on the top-end-high technologies. The volume serves as an excellent reference work for researchers and graduate students working on computational algorithms and data analysis.
Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.
Download or read book Proceedings of the Future Technologies Conference FTC 2019 written by Kohei Arai and published by Springer Nature. This book was released on 2019-10-09 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art intelligent methods and techniques for solving real-world problemsand offers a vision of future research. Featuring 143 papers from the 4th Future Technologies Conference, held in San Francisco, USA, in 2019, it covers a wide range of important topics, including, but not limited to, computing, electronics, artificial intelligence, robotics, security and communications and their applications to the real world. As such, it is an interesting, exciting and inspiring read.
Download or read book Handbook of Force Transducers written by Dan Mihai Stefanescu and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I introduces the basic "Principles and Methods of Force Measurement" according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the "(Strain Gauge) Force Transducers Components", evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the "heart" of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
Download or read book Wearable and Autonomous Biomedical Devices and Systems for Smart Environment written by Aimé Lay-Ekuakille and published by Springer Science & Business Media. This book was released on 2010-10-04 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to wearable and autonomous systems, including devices, offers to variety of users, namely, master degree students, researchers and practitioners, An opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field. The book draws the attention about interesting aspects, as for instance, advanced wearable sensors for enabling applications, solutions for arthritic patients in their limited and conditioned movements, wearable gate analysis, energy harvesting, physiological parameter monitoring, communication, pathology detection , etc..
Download or read book Next Generation Actuators Leading Breakthroughs written by Toshiro Higuchi and published by Springer Science & Business Media. This book was released on 2009-12-04 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next-Generation Actuators Leading Breakthroughs is the proceedings of the final symposium of MEXT Grant-in-Aid for Scientific Research on Priority Areas: Next-Generation Actuators Leading Breakthroughs, held in January 2010. Since the realization of next-generation actuators requires an interdisciplinary approach, the research has been organized according to a broad technological perspective that consists of: actuators for small motion of nano-meters, small-size actuators of micro-meters structures, intelligent actuators for functional motions, power actuators for large force/torque and actuators for special environments. Next-Generation Actuators Leading Breakthroughs also deals with common fundamental technologies for these actuators, such as intelligent materials, machining processes, control technologies, evaluation methods, and system integration. It provides cutting-edge research for researchers, postgraduates, and practitioners in mechanical, electrical, and materials industries.
Download or read book Mechatronic Systems written by Annalisa Milella and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools.
Download or read book Carbon Nanotubes written by M. Endo and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes have been studied extensively in relation to fullerenes, and together with fullerenes have opened a new science and technology field on nano scale materials.A whole range of issues from the preparation, structure, properties and observation of quantum effects in carbon nanotubes in comparison with 0-D fullerenes are discussed.In addition, complementary reviews on carbon nanoparticles such as carbon nano-capsules, onion-like graphite particles and metal-coated fullerenes are covered.This book aims to cover recent research and development in this area, and so provide a convenient reference tool for all researchers in this field. It is also hoped that this book can serve to stimulate future work on carbon nanotubes.
Download or read book Micro Nano Mechatronics written by Chikara Nagai and published by BoD – Books on Demand. This book was released on 2013-06-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano mechatronics is currently used in broader spectra, ranging from basic applications in robotics, actuators, sensors, semiconductors, automobiles, and machine tools. As a strategic technology highlighting the 21st century, this technology is extended to new applications in bio-medical systems and life science, construction machines, and aerospace equipment, welfare/human life engineering, and other brand new scopes. Basically, the miniaturizing technology is important to realize high performance, low energy consumption, low cost performance, small space instrumentation, light-weight, and so on. This book presents the summary of our project Center of Excellence for Education and Research of Micro-Nano Mechatronics. The project implements a strategy to realize applications of micro-nano mechatronics, which are based on mechanical engineering or materials science, control systems engineering, and advanced medical engineering. The chapters describe the research advances in micro/nano measurement and control, micro/nano design and manufacturing, nano materials science, and their applications in biomedical engineering. The publication of this book was supported by Nagoya University, the 21st COE program "Micro- and NanoMechatronics for Information-Based Society," and the global COE program “COE for Education and Research of Micro-Nano Mechatronics.”
Download or read book Proceedings of the Future Technologies Conference FTC 2019 written by Kohei Arai and published by Springer. This book was released on 2019-10-13 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art intelligent methods and techniques for solving real-world problems and offers a vision of future research. Featuring 143 papers from the 4th Future Technologies Conference, held in San Francisco, USA, in 2019, it covers a wide range of important topics, including, but not limited to, computing, electronics, artificial intelligence, robotics, security and communications and their applications to the real world. As such, it is an interesting, exciting and inspiring read.
Download or read book Enabling Technology for MEMS and Nanodevices written by Henry Baltes and published by John Wiley & Sons. This book was released on 2013-03-27 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mikro- und Nanotechnik haben Wissenschaft und Forschung revolutioniert. In Zukunft werden sie auch den Alltag verändern. Nun liegt der erste Band einer neuen Buchreihe vor: Advanced Micro and Nano Systems 1. Henry Baltes und seine Co-Autoren knüpfen mit AMN an die Sensors Update-Reihe an. Das Autorenteam wurde um weitere Experten erweitert. AMN wird zwei Mal pro Jahr mit einem neuen Band die aktuellen Entwicklungen in der Mikro- und Nano-Welt begleiten. Die Erforschung und der Einsatz von Mikro- und Nanosystemen sind eines der brandaktuellen Themen im Wissenschaftsbereich. Die Forschungsergebnisse werden mehr und mehr auch konkret umgesetzt. Damit werden Mikro- und Nanotechnologie zu Wirtschaftsfaktoren. Aktuelle Entwicklungen, neue Technologien, Nano-Bauelemente und Systeme im Mikromaßstab - Advanced Micro and Nano Systems, die neue Buchreihe, wird Spiegel der spannenden und faszinierenden Mikro- und Nano-Welt sein. Zweimal pro Jahr wird es einen neuen AMN-Band geben. Die Autoren sind ausgewiesene Spezialisten. Zu den Herausgebern zählt Henry Baltes, Professor an der ETH Zürich. Er zeichnete bereits für die Bände der Sensors Update-Reihe verantwortlich. Die Artikel ermöglichen Neueinsteigern einen ersten Zugriff auf die Materie. Fachleute erhalten einen umfassenden Überblick. Anspruch der Herausgeber ist es, nicht nur die theoretischen Grundlagen von Mikro- und Nanosystemen zu reflektieren, sondern immer auch praktische Möglichkeiten und die Grenzen der Anwendung im Blick zu haben. Die AMN-Bände sind Handbücher und Nachschlagewerke in einem. Die Reihe richtet sich an Vertreter unterschiedlicher Fachrichtungen: Biologie, Chemie, Mathematik, Sensorindustrie und Materialwissenschaften.
