Download or read book Proceedings of the International Technical Conference on Coal Utilization Fuel Systems written by and published by . This book was released on 1996 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Use of Coal written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1995-10 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4 articles: removing the hazards from coal's hazardous air pollutants; some facts about global climate change; power systems and the environmental challenges; and update on NOx control technologies. Illustrations.
Download or read book Alternative Fuels written by Sunggyu Lee and published by Taylor & Francis. This book was released on 2023-01-13 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmentally acceptable alternative fuels are in demand. This book dicusses the energy resources that are directly tied to the alleviation of petroleum dependence, and the science and technology in the area of alternative fuels. Various process treatments leading to cleaner and better use of existing fuel resources are discussed. This comprehensive reference book is consistent and is helpful for students and researchers.
Download or read book Proceedings of the 20th International Conference on Fluidized Bed Combustion written by Guangxi Yue and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 20th International Conference on Fluidized Bed Combustion (FBC) collect 9 plenary lectures and 175 peer-reviewed technical papers presented in the conference held in Xi'an China in May 18-21,2009. The conference was the 20th conference in a series, covering the latest fundamental research results, as well as the application experience from pilot plants, demonstrations and industrial units regarding to the FBC science and technology. It was co-hosted by Tsinghua University, Southeast University, Zhejiang University, China Electricity Council and Chinese Machinery Industry Federation. A particular feature of the proceedings is the balance between the papers submitted by experts from industry and the papers submitted by academic researchers, aiming to bring academic knowledge to application as well as to define new areas for research. The authors of the proceedings are the most active researchers, technology developers, experienced and representative facility operators and manufacturers. They presented the latest research results, state-of-the-art development and projects, and the useful experience. The proceedings are divided into following sections: • CFB Boiler Technology, Operation and Design • Fundamental Research on Fluidization and Fluidized Combustion • C02 Capture and Chemical Looping • Gasification • Modeling and Simulation on FBC Technology • Environments and Pollutant Control • Sustainable Fuels The proceedings can be served as idea references for researchers, engineers, academia and graduate students, plant operators, boiler manufacturers, component suppliers, and technical managers who work on FBC fundamental research, technology development and industrial application.
Download or read book Solid Fuel Blending written by David Tillman and published by Elsevier. This book was released on 2012-03-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create affordable solid fuel blends that will burn efficiently while reducing the carbon footprint. Solid Fuel Blending Handbook: Principles, Practices, and Problems describes a new generation of solid fuel blending processes. The book includes discussions on such topics as flame structure and combustion performance, boiler efficiency, capacity as influenced by flue gas volume and temperature, slagging and fouling, corrosion, and emissions. Attention is given to the major types of combustion systems including stokers, pulverized coal, cyclone, and fluidized bed boilers. Specific topics considered include chlorine in one or more coals, alkali metals (e.g., K, Na) and alkali earth elements, and related topics. Coals of consideration include Appalachian, Interior Province, and Western bituminous coals; Powder River Basin (PRB) and other subbituminous coals; Fort Union and Gulf Coast lignites, and many of the off-shore coals (e.g., Adaro coal, an Indonesian subbituminous coal with very low sulfur; other off-shore coals from Germany, Poland, Australia, South Africa, Columbia, and more). Interactions between fuels and the potential for blends to be different from the parent coals will be a critical focus of this of the book. One stop source to solid fuel types and blending processes Evaluate combustion systems and calculate their efficiency Recognize the interactions between fuels and their potential energy output Be aware of the Environmental Aspects of Fuel Blending
Download or read book Current Abstracts written by and published by . This book was released on 1995-07 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry and Technology of Coal Third Edition written by James G. Speight and published by CRC Press. This book was released on 2012-09-04 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for coal use (for electricity generation) and coal products, particularly liquid fuels and chemical feedstocks, is increasing throughout the world. Traditional markets such as North America and Europe are experiencing a steady increase in demand whereas emerging Asian markets, such as India and China, are witnessing a rapid surge in demand for clean liquid fuels. A detailed and comprehensive overview of the chemistry and technology of coal in the twenty-first century, The Chemistry and Technology of Coal, Third Edition also covers the relationship of coal industry processes with environmental regulations as well as the effects of combustion products on the atmosphere. Maintaining and enhancing the clarity of presentation that made the previous editions so popular, this book: Examines the effects of combustion products on the atmosphere Details practical elements of coal evaluation procedures Clarifies misconceptions concerning the organic structure of coal Discusses the physical, thermal, electrical, and mechanical properties of coal Analyzes the development and current status of combustion and gasification techniques In addition to two new chapters, Coal Use and the Environment and Coal and Energy Security, much of the material in this edition been rewritten to incorporate the latest developments in the coal industry. Citations from review articles, patents, other books, and technical articles with substantial introductory material are incorporated into the text for further reference. The Chemistry and Technology of Coal, Third Edition maintains its initial premise: to introduce the science of coal, beginning with its formation in the ground to the production of a wide variety of products and petrochemical intermediates in the twenty-first century. The book will prove useful for scientists and engineers already engaged in the coal and/or catalyst manufacturing industry looking for a general overview or update on the clean coal technology as well as professional researchers and students in chemistry and engineering.
Download or read book Energy Resources and Systems written by Tushar K. Ghosh and published by Springer Science & Business Media. This book was released on 2009-06-04 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the lifetimes of the authors, the world and especially the United States have received three significant “wake-up calls” on energy production and consumption. The first of these occurred on October 15, 1973 when the Yom Kippur War began with an attack by Syria and Egypt on Israel. The United States and many western countries supported Israel. Because of the western support of Israel, several Arab oil exporting nations imposed an oil embargo on the west. These nations withheld five million barrels of oil per day. Other countries made up about one million barrels of oil per day but the net loss of four million barrels of oil production per day extended through March of 1974. This represented 7% of the free world’s (i. e. , excluding the USSR) oil production. In 1972 the price of crude oil was about $3. 00 per barrel and by the end of 1974 the price of oil had risen by a factor of 4 to over $12. 00. This resulted in one of the worst recessions in the post World War II era. As a result, there was a movement in the United States to become energy independent. At that time the United States imported about one third of its oil (about five million barrels per day). After the embargo was lifted, the world chose to ignore the “wake-up call” and went on with business as usual.
Download or read book Energy Resources and Systems written by Tushar Ghosh and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the lifetimes of the authors, the world and especially the United States have received three significant “wake-up calls” on energy production and consumption. The first of these occurred on October 15, 1973 when the Yom Kippur War began with an attack by Syria and Egypt on Israel. The United States and many western countries supported Israel. Because of the western support of Israel, several Arab oil exporting nations imposed an oil embargo on the west. These nations withheld five million barrels of oil per day. Other countries made up about one million barrels of oil per day but the net loss of four million barrels of oil production per day extended through March of 1974. This represented 7% of the free world’s (i. e. , excluding the USSR) oil production. In 1972 the price of crude oil was about $3. 00 per barrel and by the end of 1974 the price of oil had risen by a factor of 4 to over $12. 00. This resulted in one of the worst recessions in the post World War II era. As a result, there was a movement in the United States to become energy independent. At that time the United States imported about one third of its oil (about five million barrels per day). After the embargo was lifted, the world chose to ignore the “wake-up call” and went on with business as usual.
Download or read book Kokuritsu Kokkai Toshokan shoz kagaku gijutsu kankei bun kaigiroku mokuroku written by Kokuritsu Kokkai Toshokan (Japan) and published by . This book was released on 1997 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Download or read book Applications of Advanced Technology to Ash Related Problems in Boilers written by L. Baxter and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the behavior of inorganic material in combustion systems. The past decade has seen unprecedented improvements in understanding the rates and mecha nisms of inorganic transformations and in developing analytical tools to predict them. These tools range from improved fuel analysis procedures to predictive computer codes. While this progress has been met with great enthusiasm within the research community, the practices of the industrial community remain largely unchanged. The papers in this book were selected from those presented at an Engineering Foundation Conference of the same title. All have been peer reviewed. The intent of the conference was to illustrate the application of advanced technology to ash-related problems in boilers and, by so doing, engage the research and industrial communities in more productive dialog. Those attending the conference generally felt that we were successful on these counts. We also engaged the industrial community to a greater extent than ever before in the conference discussion and presentation. We hope these proceedings will facilitate a continued and improved interaction between industrial and research communities. Behavior of inorganic material has long been recognized as one of the major considerations affecting the design and operation of boilers that burn ash-producing fuels. The practical problems associated with the behavior are sometimes catastrophic and spec tacular, ranging from major slag falls that damage the bottom of furnaces to complete plugging of convection passes.
Download or read book Trace Element Behaviour in Pulverised Fuel Fired Power Plants written by Harald Thorwarth and published by Cuvillier Verlag. This book was released on 2007 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal and Coalbed Gas written by Romeo M. Flores and published by Newnes. This book was released on 2013-10-19 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap in expertise between coal and coalbed gas, subfields in which opportunities for cross training have been nonexistent, Coal and Coalbed Gas sets the standard for publishing in these areas. This book treats coal and coalbed gas as mutually inclusive commodities in terms of their interrelated origin, accumulation, composition, distribution, generation, and development, providing a balanced understanding of this energy mix. Currently considered a non-renewable energy resource, coalbed gas, or coalbed methane, is a form of natural gas extracted from coal beds. In recent years, countries have begun to seek and exploit coal for its clean gas energy in an effort to alleviate environmental issues that come with coal use, making a book on this topic particularly timely. This volume takes into account processes of coalification, gasification, and storage and reservoir characterization and evaluation and looks at water management and environmental impacts as well. - Covers environmental issues in the development of coalbed gas - Includes case studies, field guides and data, examples, and analytical procedures from previous studies and investigations - Accessible by a large multidisciplinary market by one of the world's foremost experts on the topic
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration
Download or read book written by and published by . This book was released on 1997 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt:
