Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

Download or read book Proceedings of the IECON International Conference on Industrial Electronics Control and Instrumentation written by and published by . This book was released on 1997 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IECON 94 20th International Conference on Industrial Electronics Control and Instrumentation Plenary session Power electronics written by and published by . This book was released on 1994 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IECON 94 20th International Conference on Industrial Electronics Control and Instrumentation Special sessions Signal processing and control written by and published by . This book was released on 1994 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 1992 International Conference on Industrial Electronics Control Instrumentation and Automation Signal porocessing sic and systems control intelligent sensors and instrumentation written by and published by . This book was released on 1992 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 1992 International Conference on Industrial Electronics Control Instrumentation and Automation Robotics CIM and automation emerging technologies written by and published by . This book was released on 1992 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi Agent Coordination written by Arup Kumar Sadhu and published by John Wiley & Sons. This book was released on 2020-12-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest developments in multi-robot coordination techniques with this insightful and original resource Multi-Agent Coordination: A Reinforcement Learning Approach delivers a comprehensive, insightful, and unique treatment of the development of multi-robot coordination algorithms with minimal computational burden and reduced storage requirements when compared to traditional algorithms. The accomplished academics, engineers, and authors provide readers with both a high-level introduction to, and overview of, multi-robot coordination, and in-depth analyses of learning-based planning algorithms. You'll learn about how to accelerate the exploration of the team-goal and alternative approaches to speeding up the convergence of TMAQL by identifying the preferred joint action for the team. The authors also propose novel approaches to consensus Q-learning that address the equilibrium selection problem and a new way of evaluating the threshold value for uniting empires without imposing any significant computation overhead. Finally, the book concludes with an examination of the likely direction of future research in this rapidly developing field. Readers will discover cutting-edge techniques for multi-agent coordination, including: An introduction to multi-agent coordination by reinforcement learning and evolutionary algorithms, including topics like the Nash equilibrium and correlated equilibrium Improving convergence speed of multi-agent Q-learning for cooperative task planning Consensus Q-learning for multi-agent cooperative planning The efficient computing of correlated equilibrium for cooperative q-learning based multi-agent planning A modified imperialist competitive algorithm for multi-agent stick-carrying applications Perfect for academics, engineers, and professionals who regularly work with multi-agent learning algorithms, Multi-Agent Coordination: A Reinforcement Learning Approach also belongs on the bookshelves of anyone with an advanced interest in machine learning and artificial intelligence as it applies to the field of cooperative or competitive robotics.

Download or read book Proceedings of the 1993 International Conference on Industrial Electronics Control and Instrumentation written by and published by . This book was released on 1993 with total page 2393 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hard Disk Drive Servo Systems written by Ben M. Chen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Contral aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. From time to time a particular practical control problem emerges as a challenge to the design capabilities of the control community. One example has been the activated sludge process in wastewater systems where the process is highly nonlinear and measurements are few. A second example is the hard disk drive servo system. These widely used systems are critical to the operation of modem computing devices. They are nonlinear and demand a high-precision control system for the operations of track seeking and track following. There are also alternative actuation systems available to achieve these objectives. In this Advances in Industrial Control monograph B.M. Chen, T.H. Lee and V.

Download or read book Applied and Computational Control Signals and Circuits written by Biswa N. Datta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this annual series, Applied and Computational Control, Signals, and Circuits, is to keep abreast of the fast-paced developments in computational mathematics and scientific computing and their increasing use by researchers and engineers in control, signals, and circuits. The series is dedicated to fostering effective communication between mathematicians, computer scientists, computational scientists, software engineers, theorists, and practicing engineers. This interdisciplinary scope is meant to blend areas of mathematics (such as linear algebra, operator theory, and certain branches of analysis) and computational mathematics (numerical linear algebra, numerical differential equations, large scale and parallel matrix computations, numerical optimization) with control and systems theory, signal and image processing, and circuit analysis and design. The disciplines mentioned above have long enjoyed a natural synergy. There are distinguished journals in the fields of control and systems the ory, as well as signal processing and circuit theory, which publish high quality papers on mathematical and engineering aspects of these areas; however, articles on their computational and applications aspects appear only sporadically. At the same time, there has been tremendous recent growth and development of computational mathematics, scientific comput ing, and mathematical software, and the resulting sophisticated techniques are being gradually adapted by engineers, software designers, and other scientists to the needs of those applied disciplines.

Download or read book Studies on Single and Double Actuator Based DC Attraction Type Levitation Systems Optimization Techniques written by Bhaduri, Rupam and published by IGI Global. This book was released on 2023-07-24 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of DC attraction-type levitation systems (DCALS) faces challenges that hinder its optimal performance in various industrial applications, stemming from inherent instability, nonlinearity, and unmodeled dynamics. To address these issues, Studies on Single and Double Actuator Based DC Attraction Type Levitation Systems: Optimization Techniques by Dr. Rupam Bhaduri provides a comprehensive solution. This book offers an in-depth analysis, design, and optimization of DCALS, with a focus on single and double actuator systems. Through advanced optimization techniques and interdisciplinary approaches, Dr. Bhaduri equips academic scholars, researchers, and engineering professionals with the necessary knowledge and tools to overcome system complexities, achieve stability, and ensure precise control in levitation systems. By leveraging the insights presented in this invaluable resource, scholars can contribute to the advancement of DCALS through innovative research and development. The book caters to individuals specializing in electromagnetism, electronics, power electronics, mechanical engineering, and control systems, who seek a deeper understanding of DC attraction-type levitation systems. With its interdisciplinary approaches and emphasis on optimization techniques, this book unlocks the full potential of DCALS, enabling precise control and stability in industrial applications. Embracing the concepts and methodologies outlined in this book will empower scholars to overcome challenges, drive progress, and make significant contributions to the field of DC attraction-type levitation systems.

Download or read book Advances in Integrated Energy Systems Design Control and Optimization written by Josep M. Guerrero and published by MDPI. This book was released on 2018-03-23 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Integrated Energy Systems Design, Control and Optimization" that was published in Applied Sciences

Download or read book Toward Robotic Socially Believable Behaving Systems Volume II written by Anna Esposito and published by Springer. This book was released on 2016-03-29 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of research studies on sophisticated and functional computational instruments able to recognize, process, and store relevant situated interactional signals, as well as, interact with people, displaying reactions (under conditions of limited time) that show abilities of appropriately sensing and understanding environmental changes, producing suitable, autonomous, and adaptable responses to various social situations. These social robotic autonomous systems will improve the quality of life of their end-users while assisting them on several needs, ranging from educational settings, health care assistance, communicative disorders, and any disorder impairing either their physical, cognitive, or social functional activities. The multidisciplinary themes presented in the volume will be interesting for experts and students coming from different research fields and with different knowledge and backgrounds. The research reported is particularly relevant for academic centers, and Research & Development Institutions.

Download or read book Energy Efficiency in Electric Motors Drives Power Converters and Related Systems written by Mario Marchesoni and published by MDPI. This book was released on 2020-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, there is a great deal of attention focused on sustainable growth worldwide. The increase in efficiency in the use of energy may even, in this historical moment, bring greater benefit than the use of renewable energies. Electricity appears to be the most sustainable of energies and the most promising hope for a planet capable of growing without compromising its own health and that of its inhabitants. Power electronics and electrical drives are the key technologies that will allow energy savings through the reduction of energy losses in many applications. This Special Issue has collected several scientific contributions related to energy efficiency in electrical equipment. Some articles are dedicated to the use and optimization of permanent magnet motors, which allow obtaining the highest level of efficiency. Most of the contributions describe the energy improvements that can be achieved with power electronics and the use of suitable control techniques. Last but not least, some articles describe interesting solutions for hybrid vehicles, which were created mainly to save energy in the smartest way possible.

Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.

Download or read book Sequential Monte Carlo Methods in Practice written by Arnaud Doucet and published by Springer Science & Business Media. This book was released on 2001-06-21 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monte Carlo methods are revolutionizing the on-line analysis of data in many fileds. They have made it possible to solve numerically many complex, non-standard problems that were previously intractable. This book presents the first comprehensive treatment of these techniques.

Download or read book Power Switching Converters written by Dorin O. Neacsu and published by CRC Press. This book was released on 2014-10-31 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power converters are at the heart of modern power electronics. From automotive power systems to propulsion for large ships, their use permeates through industrial, commercial, military, and aerospace applications of various scales. Having reached a point of saturation where we are unlikely to see many new and revolutionary technologies, industry no