Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H. Jackson and published by Springer. This book was released on 2018-12-20 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Download or read book Nuclear Fuel Cycle Science and Engineering written by Ian Crossland and published by Elsevier. This book was released on 2012-09-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. - Provides a comprehensive and holistic review of the complete nuclear fuel cycle - Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis - Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication
Download or read book Proceedings of the 18th International Conference on Nuclear Engineering 2010 Nuclear technology applications and innovations Safety and security written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power written by Pavel Tsvetkov and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in reactor designs, materials and human-machine interfaces guarantee safety and reliability of emerging reactor technologies, eliminating possibilities for high-consequence human errors as those which have occurred in the past. New instrumentation and control technologies based in digital systems, novel sensors and measurement approaches facilitate safety, reliability and economic competitiveness of nuclear power options. Autonomous operation scenarios are becoming increasingly popular to consider for small modular systems. This book belongs to a series of books on nuclear power published by InTech. It consists of four major sections and contains twenty-one chapters on topics from key subject areas pertinent to instrumentation and control, operation reliability, system aging and human-machine interfaces. The book targets a broad potential readership group - students, researchers and specialists in the field - who are interested in learning about nuclear power.
Download or read book Progress of Nuclear Safety for Symbiosis and Sustainability written by Hidekazu Yoshikawa and published by Springer Science & Business Media. This book was released on 2014-03-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces advanced methods of computational and information systems allowing readers to better understand the state-of-the-art design and implementation technology needed to maintain and enhance the safe operation of nuclear power plants. The subjects dealt with in the book are (i) Full digital instrumentation and control systems and human–machine interface technologies (ii) Risk monitoring methods for large and complex plants (iii) Condition monitors for plant components (iv) Virtual and augmented reality for nuclear power plants and (v) Software reliability verification and validation for nuclear power plants. The target readers of this book are Ph.D. students, researchers and engineers in the field of nuclear power engineering.
Download or read book Nuclear Reactors written by Amir Mesquita and published by BoD – Books on Demand. This book was released on 2012-02-10 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of studies in nuclear reactors technology from authors across the globe. Topics discussed in this compilation include: thermal hydraulic investigation of TRIGA type research reactor, materials testing reactor and high temperature gas-cooled reactor; the use of radiogenic lead recovered from ores as a coolant for fast reactors; decay heat in reactors and spent-fuel pools; present status of two-phase flow studies in reactor components; thermal aspects of conventional and alternative fuels in supercritical water?cooled reactor; two-phase flow coolant behavior in boiling water reactors under earthquake condition; simulation of nuclear reactors core; fuel life control in light-water reactors; methods for monitoring and controlling power in nuclear reactors; structural materials modeling for the next generation of nuclear reactors; application of the results of finite group theory in reactor physics; and the usability of vermiculite as a shield for nuclear reactor.
Download or read book Proceedings of The 20th Pacific Basin Nuclear Conference written by Hong Jiang and published by Springer. This book was released on 2017-02-14 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third in a series of three proceedings of the 20th Pacific Basin Nuclear Conference (PBNC). This volume covers the topics of Power Reactor and New Buildings, Waste Management, Acquiring Medical and Biological Benefits and Student program. As one in the most important and influential conference series of nuclear science and technology, the 20th PBNC was held in Beijing and the theme of this meeting was “Nuclear: Powering the Development of the Pacific Basin and the World”. It brought together outstanding nuclear scientist and technical experts, senior industry executives, senior government officials and international energy organization leaders from all across the world. The book serves as a useful reference not only for the professionals and public to know more about nuclear industry, but also for policymakers to adjust or make energy strategies.
Download or read book Science and Technology of Liquid Metal Coolants in Nuclear Engineering written by Thiagarajan Gnanasekaran and published by Woodhead Publishing. This book was released on 2022-08-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Liquid Metal Coolants in Nuclear Engineering is a comprehensive consolidation of the latest research and knowledge on liquid metal coolants. Over the last decades, various new technologies have been developed for the liquid metal coolants of fast breeder and fusion reactors and accelerator driven systems. Details of pumps and instrumentation used in these coolants and their operating principles are included to provide the reader with a well-rounded understanding of the topic and to guide on the operation of different liquid metal coolant systems. Methods for the safe handling and control of impurity levels in these coolants are clearly discussed, along with alkali metal fires and their management, including methods for safe disposal of sodium waste. - Discusses the thermophysical and chemical properties of liquid metals described with their microscopic origin - Includes methods for the safe handling of liquid metal coolants and their purification and management - Discusses pumps and instrumentation principles and design
Download or read book Control Mechatronics and Automation Technology written by Dawei Zheng and published by CRC Press. This book was released on 2015-12-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected papers presented at the 2014 International Conference on Control, Mechatronics and Automation Technology (ICCMAT 2014), held July 24-25, 2014 in Beijing, China. The objective of ICCMAT 2014 is to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over th
Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer Nature. This book was released on 2020-01-07 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book Dynamic Simulation of Sodium Cooled Fast Reactors written by G Vaidyanathan and published by CRC Press. This book was released on 2022-11-18 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the basis of simulating a nuclear plant, in understanding the knowledge of how such simulations help in assuring the safety of the plants, thereby protecting the public from accidents. It provides the reader with an in-depth knowledge about modeling the thermal and flow processes in a fast reactor and gives an idea about the different numerical solution methods. The text highlights the application of the simulation to typical sodium-cooled fast reactor. The book • Discusses mathematical modeling of the heat transfer process in a fast reactor cooled by sodium. • Compares different numerical techniques and brings out the best one for the solution of the models. • Provides a methodology of validation based on experiments. • Examines modeling and simulation aspects necessary for the safe design of a fast reactor. • Emphasizes plant dynamics aspects, which is important for relating the interaction between the components in the heat transport systems. • Discusses the application of the models to the design of a sodium-cooled fast reactor It will serve as an ideal reference text for senior undergraduate, graduate students, and academic researchers in the fields of nuclear engineering, mechanical engineering, and power cycle engineering.
Download or read book Nuclear Power Plants written by Soon Heung Chang and published by BoD – Books on Demand. This book was released on 2012-03-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various topics, from thermal-hydraulic analysis to the safety analysis of nuclear power plant. It does not focus only on current power plant issues. Instead, it aims to address the challenging ideas that can be implemented in and used for the development of future nuclear power plants. This book will take the readers into the world of innovative research and development of future plants. Find your interests inside this book!
Download or read book Intelligent Autonomous Systems 14 written by Weidong Chen and published by Springer. This book was released on 2017-02-10 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and visions in the field of robotics as presented by leading researchers, engineers, and practitioners from around the world at the 14th International Conference on Intelligent Autonomous Systems (IAS-14), held in Shanghai, China in July 2016. The contributions amply demonstrate that robots, machines and systems are rapidly achieving intelligence and autonomy, attaining more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision-making. They cover a wide range of research results and applications, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions were selected by means of a rigorous peer-review process and highlight many exciting and visionary ideas that will further galvanize the research community and spur novel research directions. The series of biennial IAS conferences, which began in 1986, represents a premiere event in the field of robotics.
Download or read book Nuclear Energy Encyclopedia written by Thomas B. Kingery and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: The A-to-Z reference resource for nuclear energy information A significant milestone in the history of nuclear technology, Nuclear Energy Encyclopedia: Science, Technology, and Applications is a comprehensive and authoritative reference guide written by a committee of the world's leading energy experts. The encyclopedia is packed with cutting-edge information about where nuclear energy science and technology came from, where they are today, and what the future may hold for this vital technology. Filled with figures, graphs, diagrams, formulas, and photographs, which accompany the short, easily digestible entries, the book is an accessible reference work for anyone with an interest in nuclear energy, and includes coverage of safety and environmental issues that are particularly topical in light of the Fukushima Daiichi incident. A definitive work on all aspects of the world's energy supply, the Nuclear Energy Encyclopedia brings together decades of knowledge about energy sources and technologies ranging from coal and oil, to biofuels and wind, and ultimately nuclear power.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Proceedings of the 18th International Conference on Nuclear Engineering 2010 Component reliability Structural integrity written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
