Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-24 with total page 1237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation, sustainability and health, safety and well-being at work. Topics cover manufacturing process analysis and optimization, supply chain management, quality control, as well as human factors and logistics. They highlight the role and advantages of intelligent systems and technologies, discussing current best-practices and challenges to cope with in the near future. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18–22, 2023, in Porto, Portugal, this second volume of a 2-volume set provides academics and professionals with extensive information on innovative strategies for industrial management in the era of industry 5.0.

Download or read book Global Implications of Modern Enterprise Information Systems Technologies and Applications written by Gunasekaran, Angappa and published by IGI Global. This book was released on 2008-12-31 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents useful strategies, techniques, and tools for the successful design, development, and implementation of enterprise information systems"--Provided by publisher.

Download or read book Flexible Automation and Intelligent Manufacturing The Human Data Technology Nexus written by Kyoung-Yun Kim and published by Springer Nature. This book was released on 2022-10-12 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. It gathers the first volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it reports on advanced manufacturing processes, and innovative materials for 3D printing, applications of machine learning, artificial intelligence and mixed reality in various production sectors, as well as important issues in human-robot collaboration, including methods for improving safety. Contributions also cover strategies to improve quality control, supply chain management and training in the manufacturing industry, and methods supporting circular supply chain and sustainable manufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation.

Download or read book Enterprise Information Systems Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2010-09-30 with total page 2042 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume collection, titled Enterprise Information Systems: Concepts, Methodologies, Tools and Applications, provides a complete assessment of the latest developments in enterprise information systems research, including development, design, and emerging methodologies. Experts in the field cover all aspects of enterprise resource planning (ERP), e-commerce, and organizational, social and technological implications of enterprise information systems.

Download or read book Advances in Communication Systems and Electrical Engineering written by He Huang and published by Springer Science & Business Media. This book was released on 2008-02-02 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions from participants in the 2007 International Multiconference of Engineers and Computer Scientists. It covers a variety of subjects in the frontiers of intelligent systems and computer engineering and their industrial applications. The book reflects the tremendous advances in communication systems and electrical engineering. The book provides an excellent reference work for researchers and graduate students working in the field.

Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.

Download or read book Ontology Modeling in Physical Asset Integrity Management written by Vahid Ebrahimipour and published by Springer. This book was released on 2015-04-20 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge applications of, and up-to-date research on, ontology engineering techniques in the physical asset integrity domain. Though a survey of state-of-the-art theory and methods on ontology engineering, the authors emphasize essential topics including data integration modeling, knowledge representation, and semantic interpretation. The book also reflects novel topics dealing with the advanced problems of physical asset integrity applications such as heterogeneity, data inconsistency, and interoperability existing in design and utilization. With a distinctive focus on applications relevant in heavy industry, Ontology Modeling in Physical Asset Integrity Management is ideal for practicing industrial and mechanical engineers working in the field, as well as researchers and graduate concerned with ontology engineering in physical systems life cycles.

Download or read book Cloud Manufacturing written by Weidong Li and published by Springer Science & Business Media. This book was released on 2013-03-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems. The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas. Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical and Electronic Equipment (WEEE) remanufacturing. This compilation of up to date research and literature can be used as a textbook or reference for mechanical, manufacturing, and computer engineering graduate students and researchers for efficient utilization, deployment and development of distributed and Cloud manufacturing systems, services and applications.

Download or read book Landfills written by Gustavo B. C. Cabral and published by Nova Science Publishers. This book was released on 2012 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although several countries have been introducing more stringent laws to reduce the amount of waste to be land-filled, in an attempt to maximise recycling and materials recovery, landfilling is still the most generalised practice for municipal solid waste treatment. In this book, the authors discuss waste management in landfills, regional practices and its environmental impact. Topics include the reduction of environmental impact of municipal landfill leachate during oxidative treatment; polymers recycling; management of electronic waste in the Basque Country; and toxicity of landfills by plant cytogenetic and mutagenic effects.

Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.

Download or read book Production Management and Process Control written by Beata Mrugalska and published by AHFE International. This book was released on 2022-07-24 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Management and Process Control Proceedings of the 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022), July 24–28, 2022, New York, USA

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Advances in Sustainable and Competitive Manufacturing Systems written by Américo Azevedo and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings includes the set of revised papers from the 23rd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2013). This conference aims to provide an international forum for the exchange of leading edge scientific knowledge and industrial experience regarding the development and integration of the various aspects of Flexible Automation and Intelligent Manufacturing Systems covering the complete life-cycle of a company’s Products and Processes. Contents will include topics such as: Product, Process and Factory Integrated Design, Manufacturing Technology and Intelligent Systems, Manufacturing Operations Management and Optimization and Manufacturing Networks and MicroFactories.

Download or read book Mass Customized Manufacturing written by Vladimir Modrak and published by CRC Press. This book was released on 2017-02-17 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings several original contributions to research and practical applications in the field of mass customization from the designer, manufacturer, and customer perspectives respectively. It presents advancements in product design for mass customization, design of assembly and supply chain processes, variety induced complexity models, complexity management, marketing tools, information systems to support decision-making, and critical success factors of this manufacturing and marketing strategy.. A special focus of interest is also on the use of product configurators in practice and sustainability assessment for mass customization strategy. The aim is to disseminate current developments and approaches for further theoretical investigation and practical applications of mass customized manufacturing systems.

Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.

Download or read book Introduction to Product Service System Design written by Tomohiko Sakao and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Introduction to Product/Service-System Design" contains a collection of practical examples demonstrating how to design a PSS in industry. These recent examples are the results of applying various theories developed in different countries and therefore accommodating diverse cultural differences. Providing a useful overall guide to the state of the art in theory and practice, each chapter covers the cutting edge of a different methodology or practice. The book’s focus on design is also evident in the discussion of how to anticipate and utilize the various dynamics within each dimension. "Introduction to Product/Service-System Design" will help improve working processes and inspire creative thinking for the wide range of people involved in designing a PSS: designers, marketing professionals, sales staff, production engineers, and service engineers. It can also serve as a reference book for university students on advanced courses.

Download or read book Information Technology for Management Current Research and Future Directions written by Ewa Ziemba and published by Springer Nature. This book was released on 2020-03-10 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes extended selected papers from the 17th Conference on Advanced Information Technologies for Management, AITM 2019, and the 14th Conference on Information Systems Management, ISM 2019, held as part of the Federated Conference on Computer Science and Information Systems, FedCSIS, which took place in Leipzig, Germany, in September 2019. The total of 7 full and 6 short papers presented in this volume were carefully reviewed and selected from a total of 45 submissions. The papers selected to be included in this book contribute to the understanding of relevant trends of current research on and future directions of information technology for management in business and public organizations. They were organized in topical sections named: information technology assessment for future development; methods and models for designing information technology, and aspects of implementing information technology.