Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-09-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-28 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Metal Forming 2024 written by Danuta Szeliga and published by Materials Research Forum LLC. This book was released on 2024-09-15 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers a great range of topics, including (1) Incremental forming and metal forming of 3D printed materials; (2) numerical modeling of processes and systems; (3) material characterization techniques for predicting microstructure evolution and mechanical properties during or after thermomechanical processing; (4) constitutive and numerical modeling, as well as process and system optimization. The materials covered include metal powders, lightweight systems, advanced high-strength steels, multiphase materials, and high-entropy alloys.
Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-19 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-22 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Forming the Future written by Glenn Daehn and published by Springer Nature. This book was released on 2021-07-10 with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.
Download or read book Thermal Spraying for Power Generation Components written by Klaus Erich Schneider and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thousands of patents address new coating types, new developments, new chemical compositions. However, sometimes coatings is still considered as an "art". This book now deals with questions that are essential for a good performance of this "art": Is there a given process stability? Is there an inherent process capability for a given specification which cannot be improved? What is the right preventive maintenance strategy? Is there a chance to end up with coating process capabilities in the order of other manufacturing processes? This book is not a pure scientific book. It is of most value for the engineer involved in design, processing and application of thermally spayed coatings: To understand the capability and limitations of thermal spraying, to understand deposition efficiency (waste of powder) and the importance of maintenance and spare parts for quick change over of worn equipment, to use offline programming and real equipment in an optimum mix to end up with stable processes in production after shortest development time and in the end to achieve the final target in production: process stability at minimum total cost.
Download or read book Mathematical Models of Exoskeleton written by Andrey Valerievich Borisov and published by Springer Nature. This book was released on 2022-03-31 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the current state of the problem of describing the musculoskeletal system of a person. Models of the destruction of the endoskeleton and the restoration of its functions using exoskeleton are presented. A description is given of new approaches to modeling based on the use of weightless rods of variable length with concentrated masses. The practical application to the tasks of numerical simulation of the movements of the musculoskeletal system of a person is described. Exoskeleton models with variable-length units based on absolutely hard sections and sections that change their telescopic type length have been developed. The book is intended for specialists in the field of theoretical mechanics, biomechanics, robotics and related fields. The book will be useful to teachers, as well as graduate students, undergraduates and senior students of higher educational institutions, whose research interests lie in the modeling of anthropomorphic biomechanical systems.
Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book National Library of Medicine Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1982 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Biomaterials and Biodevices written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-06-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge book focuses on the emerging area of biomaterials and biodevices that incorporate therapeutic agents, molecular targeting, and diagnostic imaging capabilities The design and development of biomaterials play a significant role in the diagnosis, treatment, and prevention of diseases. When used with highly selective and sensitive biomaterials, cutting-edge biodevices can allow the rapid and accurate diagnosis of disease, creating a platform for research and development, especially in the field of treatment for prognosis and detection of diseases in the early stage. This book emphasizes the emerging area of biomaterials and biodevices that incorporate therapeutic agents, molecular targeting, and diagnostic imaging capabilities. The 15 comprehensive chapters written by leading experts cover such topics as: The use of severe plastic deformation technique to enhance the properties of nanostructured metals Descriptions of the different polymers for use in controlled drug release Chitin and chitosan as renewable healthcare biopolymers for biomedical applications Innovated devices such as “label-free biochips” and polymer MEMS Molecular imprinting and nanotechnology Prussian Blue biosensing applications The evaluation of different types of biosensors in terms of their cost effectiveness, selectivity, and sensitivity Stimuli-responsive polypeptide nanocarriers for malignancy therapeutics
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Methods for Predicting Material Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 2014-06-28 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this book deal with computational methods for predicting material processing defects. Using recent advances in finite strain plasticity and viscoplasticity, damage modelling, bifurcation and instability theory, fracture mechanics and computer numerical techniques, new approaches to mechanical defect analysis are proposed. Appropriate methods for explaining and avoiding the defects leading to fracture, high porosity, strain localization or undesirable geometrical imperfections are presented. In addition, some papers are devoted to new formulations and new calculation algorithms to be used for solving the forming problems. Finally, two papers deal with physical description of defects occurring in forming and cutting operations, focusing on the academic and practical interest of these topics.This is the first book to deal with the prediction of defects occurring in material forming processes; it contains much of interest from both a theoretical and a practical viewpoint.
Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1982 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: First multi-year cumulation covers six years: 1965-70.
Download or read book Computational Plasticity written by D. R. J. Owen and published by . This book was released on 1997 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
