Download or read book Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2003-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies

Download or read book Industrial Ceramics written by and published by . This book was released on 2001 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gems Gemology written by and published by . This book was released on 2003 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Technology Research and Education written by Dumitru Luca and published by Springer. This book was released on 2017-09-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 16th International Conference on Global Research and Education Inter-Academia 2017 hosted by Alexandru Ioan Cuza University of Iași, Romania from 25 to 28 September 2017. It is the third volume in the series, following the editions from 2015 and 2016. Fundamental and applied research in natural sciences have led to crucial developments in the ongoing 4th global industrial revolution, in the course of which information technology has become deeply embedded in industrial management, research and innovation – and just as deeply in education and everyday life. Materials science and nanotechnology, plasma and solid state physics, photonics, electrical and electronic engineering, robotics and metrology, signal processing, e-learning, intelligent and soft computing have long since been central research priorities for the Inter-Academia Community (I-AC) – a body comprising 14 universities and research institutes from Japan and Central/East-European countries that agreed, in 2002, to coordinate their research and education programs so as to better address today’s challenges. The book is intended for use in academic, government, and industrial R&D departments as a reference tool in research and technology education. The 42 peer-reviewed papers were written by more than 119 leading scientists from 14 countries, most of them affiliated to the I-AC.

Download or read book The Nature of Diamonds written by George E. Harlow and published by Cambridge University Press. This book was released on 1998 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paragon of physical perfection and a sparkling example of Earth's forces at work, the diamond has fascinated all realms of society, from Russian tsars and Hollywood stars to scientists and brides-to-be. The Nature of Diamonds is an authoritative and richly illustrated look at nature's most coveted gem. Leading geologists, gemologists, physicists, and cultural observers cover every facet of the stone, from its formation in the depths of the Earth and its explosive ascent to the surface, to its economic, regal, social, and technological roles. The book takes the reader to cutting-edge research on the frontiers of diamond exploration and exploitation, from Arctic wastes to laboratories that create industrial diamonds for cutting tools that slice through rock. Charting the history of mining from its origins in India and Brazil, the book follows the diamond rush in South Africa to today's high-tech enterprises. It provides a glimpse into the economics of the diamond trade, and an overview of diamond cutting, from the rough uncut stones in early Indian and Roman jewelry to the multifaceted stones we see today. The cultural history of the diamond as both a revered and a social symbol is explored, from its early history as the exclusive property of royalty to today's brilliant-laden jewelry as an emblem of wealth and status. The engaging text is complemented by more than 200 lavish illustrations which span fine art, earth science, and cultural studies and capture the brilliance and beauty of this extraordinary gem.

Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.

Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.

Download or read book Surface Engineered Surgical Tools and Medical Devices written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-08-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the interaction between nano tools and nano materials. It explains the use of appropriate tools in surgery for a variety of applications and provides a complete description of clinical procedures accompanied by photographs. Coverage also presents the latest developments in surface coatings technology such as chemical vapor deposition for use on complex cutting tools for biomedical applications.

Download or read book High Pressure Surface Science and Engineering written by Yury Gogotsi and published by CRC Press. This book was released on 2019-09-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many instances of mechanical interaction between two materials, the physical contact affects only the outermost surface layer, with little discernible influence on the bulk of the material. The resultant high pressures in these localised regimes can induce surface structural changes such as deformation, phase transformation and amorphization.

Download or read book Nanowires and Nanobelts written by Zhong Lin Wang and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1, Metal and Semiconductor Nanowires covers a wide range of materials systems, from noble metals (such as Au, Ag, Cu), single element semiconductors (such as Si and Ge), compound semiconductors (such as InP, CdS and GaAs as well as heterostructures), nitrides (such as GaN and Si3N4) to carbides (such as SiC). The objective of this volume is to cover the synthesis, properties and device applications of nanowires based on metal and semiconductor materials. The volume starts with a review on novel electronic and optical nanodevices, nanosensors and logic circuits that have been built using individual nanowires as building blocks. Then, the theoretical background for electrical properties and mechanical properties of nanowires is given. The molecular nanowires, their quantized conductance, and metallic nanowires synthesized by chemical technique will be introduced next. Finally, the volume covers the synthesis and properties of semiconductor and nitrides nanowires.

Download or read book Conjugated Polymer And Molecular Interfaces written by William R. Salaneck and published by CRC Press. This book was released on 2001-10-18 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defines the state-of-the-art in interface science for electronic applications of organic materials. Updates understanding of the foundaiton of interfacial properties. Describes novel electronic devices created from conjugated polymers and organic molecular solids.

Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.

Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.

Download or read book Metallic Materials with High Structural Efficiency written by Oleg N. Senkov and published by Springer Science & Business Media. This book was released on 2004-06-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.

Download or read book New Materials Processes and Methods Technology written by Mel Schwartz and published by CRC Press. This book was released on 2005-11-04 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials selection is a crucial factor in determining the cost, quality, and corrosion protection for every engineering project. The variety of increasingly durable materials and their combinations, coupled with the rise of new and more critical service requirements and the demand for lower costs, have expanded upon trial-and-error criteria into m