Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. - Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance - Examines why diamond semiconductors could lead to superior power electronics - Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics

Download or read book Advances in Corrosion Control of Magnesium and its Alloys written by Viswanathan S. Saji and published by CRC Press. This book was released on 2023-08-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) and its alloys have received widespread acceptance in automobile industries and biomedical applications with substantial recent advancements made in their development, however a significant limitation remains their poor aqueous and galvanic corrosion resistance. This book covers both the fundamentals and recent advancements in two major corrosion protection strategies of magnesium and its alloys, namely, metal-matrix composites and protective coatings. Key features: Covers all aspects of metal-matrix composites and protective coatings for magnesium alloys to improve their corrosion resistance, wear resistance, mechanical properties and biocompatibility Provides the most recent research advancements in the corrosion mitigation strategies of magnesium and its alloys Complete with case studies specific to practical applications, this book serves as a ready reference for graduate students, researchers, engineers and industry professionals in the fields of materials, corrosion science, biofouling and protective coatings.

Download or read book Ultrananocrystalline Diamond written by Olga A. Shenderova and published by William Andrew. This book was released on 2012-12-31 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrananocrystalline Diamond: Synthesis, Properties, and Applications is a unique practical reference handbook. Written by the leading experts worldwide it introduces the science of UNCD for both the R&D community and applications developers using UNCD in a diverse range of applications from macro to nanodevices, such as energy-saving ultra-low friction and wear coatings for mechanical pump seals and tools, high-performance MEMS/NEMS-based systems (e.g. in telecommunications), the next generation of high-definition flat panel displays, in-vivo biomedical implants, and biosensors. This work brings together the basic science of nanoscale diamond structures, with detailed information on ultra-nanodiamond synthesis, properties, and applications. The book offers discussion on UNCD in its two forms, as a powder and as a chemical vapor deposited film. Also discussed are the superior mechanical, tribological, transport, electrochemical, and electron emission properties of UNCD for a wide range of applications including MEMS/ NEMS, surface acoustic wave (SAW) devices, electrochemical sensors, coatings for field emission arrays, photonic and RF switching, biosensors, and neural prostheses, etc. - Ultrananocrystalline Diamond summarises the most recent developments in the nanodiamond field, and presents them in a way that will be useful to the R&D community in both academic and corporate sectors - Coverage of both nanodiamond particles and films make this a valuable resource for both the nanotechnology community and the field of thin films / vacuum deposition - Written by the world's leading experts in nanodiamond, this second edition builds on its predecessor's reputation as the most up-to-date resource in the field

Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.

Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.

Download or read book The Nature of Diamonds written by George E. Harlow and published by Cambridge University Press. This book was released on 1998 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paragon of physical perfection and a sparkling example of Earth's forces at work, the diamond has fascinated all realms of society, from Russian tsars and Hollywood stars to scientists and brides-to-be. The Nature of Diamonds is an authoritative and richly illustrated look at nature's most coveted gem. Leading geologists, gemologists, physicists, and cultural observers cover every facet of the stone, from its formation in the depths of the Earth and its explosive ascent to the surface, to its economic, regal, social, and technological roles. The book takes the reader to cutting-edge research on the frontiers of diamond exploration and exploitation, from Arctic wastes to laboratories that create industrial diamonds for cutting tools that slice through rock. Charting the history of mining from its origins in India and Brazil, the book follows the diamond rush in South Africa to today's high-tech enterprises. It provides a glimpse into the economics of the diamond trade, and an overview of diamond cutting, from the rough uncut stones in early Indian and Roman jewelry to the multifaceted stones we see today. The cultural history of the diamond as both a revered and a social symbol is explored, from its early history as the exclusive property of royalty to today's brilliant-laden jewelry as an emblem of wealth and status. The engaging text is complemented by more than 200 lavish illustrations which span fine art, earth science, and cultural studies and capture the brilliance and beauty of this extraordinary gem.

Download or read book Silicon Carbide and Related Materials 2006 written by N. Wright and published by Trans Tech Publication. This book was released on 2007 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC), Gallium Nitride (GaN) and Diamond are wide-bandgap semiconductors which also possess extraordinary chemical, electrical and optical properties that make them uniquely attractive for the fabrication of high-power and high-frequency electronic devices, as well as of light-emitters and sensors which have to survive harsh operating conditions.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.

Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.

Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.

Download or read book Self healing Materials written by Swapan Kumar Ghosh and published by John Wiley & Sons. This book was released on 2009-08-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers self-healing concepts for all important material classes and their applications: polymers, ceramics, non-metallic and metallic coatings, alloys, nanocomposites, concretes and cements, as well as ionomers. Beginning with the inspiration from biological self-healing, its mimickry and conceptual transfer into approaches for the self-repair of artificially created materials, this book explains the strategies and mechanisms for the readers' basic understanding, then covers the different material classes and suitable self-healing concepts, giving examples for their application in practical situations. As the first book in this swiftly growing research field, it is of great interest to readers from many scientific and engineering disciplines, such as physics and chemistry, civil, architectural, mechanical, electronics and aerospace engineering.

Download or read book Multiscale Dissipative Mechanisms and Hierarchical Surfaces written by Michael Nosonovsky and published by Springer Science & Business Media. This book was released on 2008-06-21 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Dissipative Mechanisms and Hierarchical Surfaces covers the rapidly developing topics of hierarchical surfaces, roughness-induced superhydrophobicity and biomimetic surfaces. The research in these topics has been progressing rapidly in the recent years due to the advances in the nanosciences and surfaces science and due to potential applications in nanotechnology. The first in its field, this monograph provides a comprehensive review of these subjects and presents the background introduction as well as recent and new results in the area.

Download or read book Introduction to Thermoelectricity written by H. Julian Goldsmid and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermoelectricity is the latest work by Professor Julian Goldsmid drawing on his 55 years experience in the field. The theory of the thermoelectric and related phenomena is presented in sufficient detail to enable researchers to understand their observations and develop improved thermoelectric materials. The methods for the selection of materials and their improvement are discussed. Thermoelectric materials for use in refrigeration and electrical generation are reviewed. Experimental techniques for the measurement of properties and for the production of thermoelements are described. Special emphasis is placed on nanotechnology which promises to yield great improvements in the efficiency of thermoelectric devices. Chapters are also devoted to transverse thermoelectric effects and thermionic energy conversion, both techniques offering the promise of important applications in the future.

Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Nano Microscale Heat Transfer written by Zhuomin M. Zhang and published by Springer Nature. This book was released on 2020-06-23 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This substantially updated and augmented second edition adds over 200 pages of text covering and an array of newer developments in nanoscale thermal transport. In Nano/Microscale Heat Transfer, 2nd edition, Dr. Zhang expands his classroom-proven text to incorporate thermal conductivity spectroscopy, time-domain and frequency-domain thermoreflectance techniques, quantum size effect on specific heat, coherent phonon, minimum thermal conductivity, interface thermal conductance, thermal interface materials, 2D sheet materials and their unique thermal properties, soft materials, first-principles simulation, hyperbolic metamaterials, magnetic polaritons, and new near-field radiation experiments and numerical simulations. Informed by over 12 years use, the author’s research experience, and feedback from teaching faculty, the book has been reorganized in many sections and enriched with more examples and homework problems. Solutions for selected problems are also available to qualified faculty via a password-protected website.• Substantially updates and augments the widely adopted original edition, adding over 200 pages and many new illustrations;• Incorporates student and faculty feedback from a decade of classroom use;• Elucidates concepts explained with many examples and illustrations;• Supports student application of theory with 300 homework problems;• Maximizes reader understanding of micro/nanoscale thermophysical properties and processes and how to apply them to thermal science and engineering;• Features MATLAB codes for working with size and temperature effects on thermal conductivity, specific heat of nanostructures, thin-film optics, RCWA, and near-field radiation.

Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.