Download or read book Consolidation of Soils written by Frank C. Townsend and published by ASTM International. This book was released on 1986 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Geomechanics written by Bernhard A. Schrefler and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of topics that are of increasing importance in engineering practice: natural hazards, pollution, and environmental protection through good practice. The first half of the book deals with natural risk factors, of both natural and human origin, that should be considered: subsidence, accidental infiltration, soil instability, rockslides and mudslides, debris flow, and degradation of buildings and monuments due to pollution and climactic effects, for example. These problems are highlighted and it is shown that a combination of sophisticated numerical techniques and extensive experimental investigations are necessary in order to effectively tackle these problems. The second half of the book is devoted to the use of polluted sites and associated problems, a topic of growing significance given the increasing reclamation of land from abandoned industrial sites for urban development over the last 20 years. Different types of oil pollution and decontamination methods are described, followed by a discussion of waste management and detailed coverage of confinement liners used in surface waste disposal.
Download or read book History of Progress written by W. Allen Marr and published by ASCE Publications. This book was released on 2003-01-01 with total page 2392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Geo-Institute of ASCE This collection of 78 historical papers provides a wide view of the rich body of literature that documents the development of fundamental concepts geotechnical engineering and their application to practical problems. From the highly theoretical to the elegantly practical, the papers in this one-of-a-kind collection are significant for their contributions to the geotechnical engineering literature. Among the writings of more than 60 geotechnical engineering pioneers are several by Karl Terzaghi, widely known as the father of soil mechanics, R.R. Proctor, Arthur Casagrande, and Ralph Peck. Many of these papers contain information as useful today as when they were first written. Others provide great insight into the origins and development of the field and the thought processes of its leaders.
Download or read book Soil Mechanics written by T. William Lambe and published by John Wiley & Sons. This book was released on 1991-01-15 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic, comprehensive guide to the physics of soil The physical behavior of soil under different environmental conditions impacts public safety on every roadway and in every structure; a deep understanding of soil mechanics is therefore an essential component to any engineering education. Soil Mechanics offers in-depth information on the behavior of soil under wet, dry, or transiently wet conditions, with detailed explanations of stress, strain, shear, loading, permeability, flow, improvement, and more. Comprehensive in scope, this book provides accessible coverage of a critical topic, providing the background aspiring engineers will need throughout their careers.
Download or read book Special Report written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1952 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Mechanics Vol 1 written by Pile Buck and published by Lulu.com. This book was released on 2012-09-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent handbook combines four technical manuals covering Site Investigations, Laboratory Testing of Soils and basic Soils Engineering applicable to the Planning, Design and Construction of Pile Foundations and other major Civil Structures. Our manual reviews the various methods of conducting site investigations and laboratory and field testing, preliminary to project design. Covering the basics of soils identification procedures and goes on to settlement behavior, seepage, slope stability and other important subjects. Detailing some more difficult technical subjects including seismic activity and vibrations to some of the modern solutions for soils stabilization such as vibro-flotation and cement or chemical grouting methods.
Download or read book 100 Years of Prandtl s Wedge written by S. Van Baars and published by IOS Press. This book was released on 2018-04-17 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biggest problem for a shallow foundation, just as for any other type of foundation, is a failure due to an overestimation of the bearing capacity. This means that the correct prediction of the bearing capacity of the foundation is often the most important part of the design of a civil structure. That is why the publication by Prandtl in 1920 about the hardness of a plastic body, was a major step in solving the bearing capacity of shallow foundations, although it is well possible that he never realised this, because his solution was not made for civil engineering purposes, but for mechanical purposes. Over the last 100 years, a lot of extensions have been made, for example with inclination factors and shape factors. Also many laboratory experiments have been done and numerical calculations have been made. Some even try to extrapolate the failure mechanism for shallow foundations to the failure mechanism around the tip of a pile. All this scientific work leads back to the first publication by Ludwig Prandtl in 1920. This book, “100 Years of Prandtl’s Wedge”, is intended for all those who are interested in these fundamentals of foundation engineering and their history. The Appendices include a copy of Prandtl’s Über die Härte plastischer Körper and of Reissner’s publication of 1924, Zum Erddruckproblem.
Download or read book Analysis and Design of Geotechnical Structures written by Manuel Matos Fernandes and published by CRC Press. This book was released on 2020-08-27 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and design of geotechnical structures combines, in a single endeavor, a textbook to assist students in understanding the behavior of the main geotechnical works and a guide for practising geotechnical engineers, designers, and consultants. The subjects are treated in line with limit state design, which underpins the Eurocodes and most North America design codes. Instructors and students will value innovative approaches to numerous issues refined by the experience of the author in teaching generations of enthusiastic students. Professionals will gain from its comprehensive treatment of the topics covered in each chapter, supplemented by a plethora of informative material used by consultants and designers. For the benefit of both academics and professionals, conceptual exercises and practical geotechnical design problems are proposed at the end of most chapters. A final annex includes detailed resolutions of the exercises and problems.
Download or read book ICE Manual of Geotechnical Engineering Volume 1 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.
Download or read book Geotechnical Engineering Education and Training written by I Antonescu and published by CRC Press. This book was released on 2020-09-10 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers and reports from the Conference held in Romania, June 2000. The book covers many topics, for example, place, role and content of geotechnical engineering in civil, environmental and earthquake engineering.
Download or read book Unsaturated Soil Mechanics in Engineering Practice written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.
Download or read book The Emergence of Unsaturated Soil Mechanics written by National Research Council Canada and published by NRC Research Press. This book was released on 1999 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is an assemblage of selected papers that have been authored or co-authored by D.G. Fredlund. The substance of these papers documents the milestones of both the science of unsaturated soil mechanincs and the career of the author during his tenure as a faculty member in the Department of Civil Engineering at the University of Saskatchewan, Saskatoon, Canada.
Download or read book Soils and Geotechnology in Construction written by Alan J. Lutenegger and published by CRC Press. This book was released on 2019-04-30 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the field of applied geotechnology related to all aspects of construction in ground, including compacted fill, excavations, ground improvement, foundations, earth retaining systems and geotechnical site characterization. It suits the first year of a graduate course on ground improvement and geoconstruction and will suit practicing engineers, both consultants and contractors. Distinctively it covers the identification of problematic soils and appropriate mitigation measures, and the inspection of ground construction work. It combines the technical and the practical in applied geotechnology.
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book Ground Improvement Second Edition written by Michael P. Moseley and published by CRC Press. This book was released on 2004-02-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing need to redevelop land in urban areas has led to major development in the field of ground improvement, a process that is continuing and expanding. Vibratory deep compaction and grouting techniques have also been increasingly applied to solving the problems of urban development, whether from tunnelling, excavation, building renovation or bearing capacity improvement and settlement reduction. The second edition of this well established book continues to provide an international overview of the major techniques in use. Comprehensively updated in line with recent developments, each chapter is written by an acknowledged expert in the field. Ground Improvements is written for geotechnical and civil engineers, and for contractors working in grouting, ground improvement, piling and environmental engineering.
Download or read book Laboratory Shear Strength of Soil written by Raymond Nen Yong and published by ASTM International. This book was released on 1981 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Predictive Soil Mechanics written by Peter Wroth and published by Thomas Telford. This book was released on 1993 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the 49 papers which form the proceedings of the Wroth Memorial Symposium. The themes of the symposium were soil properties and their measurement, especially means of in-situ tests, prediction and performance, and design methods.
