Download or read book Electronic Properties of Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-07-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. These one-dimensional (1D) graphene sheets rolled into a tubular form have been the target of many researchers around the world. This book concentrates on the semiconductor physics of carbon nanotubes, it brings unique insight into the phenomena encountered in the electronic structure when operating with carbon nanotubes. This book also presents to reader useful information on the fabrication and applications of these outstanding materials. The main objective of this book is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. Readers of this book should have a strong background on physical electronics and semiconductor device physics. This book first discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Ultimately, the book pursues a significant amount of work in the industry applications of carbon nanotubes.
Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book The Toxicology of Carbon Nanotubes written by Ken Donaldson and published by Cambridge University Press. This book was released on 2022-09-29 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The widespread and increasing use of carbon nanotubes in scientific and engineering research and their incorporation into manufactured goods has urged an assessment of the risks and hazards associated with exposure to them. The field of nanotoxicology studies the toxicology of nanoparticles such as carbon nanotubes and has become a major growth area aimed towards risk assessment of nanoparticles. Compiled by a team of leading experts at the forefront of research, this is the first book dedicated to the toxicology of carbon nanotubes. It provides state-of-the-science information on how and why they are so potentially dangerous if breathed in, including their similarities to asbestos. The book examines various aspects of carbon nanotubes, from their manufacture and aerodynamic behaviour to their effects at molecular level in the lungs. It is invaluable to the many groups involved with research in this area, as well as to regulators and risk assessors.
Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2019-03-12 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials: Science, Manufacturing, Commercialization, Second Edition, helps engineers and entrepreneurs understand the science behind the unique properties of nanotube fiber materials, how to efficiency and safely produce them, and how to transition them into commercial products. Each chapter gives an account of the basic science, manufacturing, properties and commercial potential of a specific nanotube material form and its application. New discoveries and technologies are explained, along with experiences in handing-off the improved materials to industry. This book spans nano-science, nano-manufacturing, and the commercialization of nanotube superfiber materials. As such, it opens up the vast commercial potential of nanotube superfiber materials. Applications for nanotube superfiber materials cut across most of the fields of engineering, including spacecraft, automobiles, drones, hyperloop tracks, water and air filters, infrastructure, wind energy, composites, and medicine where nanotube materials enable development of tiny machines that can work inside our bodies to diagnose and treat disease. - Provides up to date information on the applications of nanotube fiber materials - Explores both the manufacturing and commercialization of nanotube superfibers - Sets out the processes for producing macro-scale materials from carbon nanotubes - Describes the unique properties of these materials
Download or read book Scanned Probe Microscopy of the Electronic Properties of Low dimensional Systems written by Michael Thomas Woodside and published by Ann Arbor, Mich. : University Microfilms International. This book was released on 2001 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotubes and Nanowires written by C N R Rao and published by Royal Society of Chemistry. This book was released on 2021-10-27 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, demonstrating a wide range of fascinating properties. Many of these, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from a vast array of inorganic materials and provide great scope for further research into their properties and possible applications. Chapters in this book systematically describe the fundamentals and applications of nanotubes and nanowires, providing a comprehensive and up-to-date survey of the research area, including synthesis, characterisation, properties and applications. This new edition of Nanotubes and Nanowires includes an extensive list of references and is ideal both for graduates needing an introduction to the field of nanomaterials as well as for professionals and researchers in academia and industry. Review of Nanotubes and Nanowires 1st Edition: “This book does a truly admirable job of summarizing the literature in this rapidly changing field.” Journal of the American Chemical Society, 2006, 128, 4163-4164 Review of Nanotubes and Nanowires 2nd Edition: “Rao and Govindaraj do a superb job of distilling the huge literature on inorganic nanotubes and nanowires.” Chemistry & Industry, 2011, 24, 27
Download or read book Electronic and Optical Properties of Graphite Related Systems written by Chiun-Yan Lin and published by CRC Press. This book was released on 2017-12-12 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of electronic and optical properties of graphite-related systems. It presents a well-developed and up-to-date theoretical model and addresses important advances in essential properties and diverse quantization phenomena. Key features include various Hamiltonian models, dimension-enriched carbon-related systems, complete and unusual results, detailed comparisons with the experimental measurements, clear physical pictures, and further generalizations to other emergent 2D materials. It also covers potential applications, such as touch-screen panel devices, FETs, supercapacitors, sensors, LEDs, solar cells, photodetectors, and photomodulators.
Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes represent one of the most exciting research areas in modern science. These molecular-scale carbon tubes are the stiffest and strongest fibres known, with remarkable electronic properties, and potential applications in a wide range of fields. Carbon Nanotube Science is a concise, accessible book, presenting the basic knowledge that graduates and researchers need to know. Based on the successful Carbon Nanotubes and Related Structures, this book focuses solely on carbon nanotubes, covering the major advances made in recent years in this rapidly developing field. Chapters focus on electronic properties, chemical and bimolecular functionalisation, nanotube composites and nanotube-based probes and sensors. The book begins with a comprehensive discussion of synthesis, purification and processing methods. With its comprehensive coverage of this active research field, this book will appeal to researchers in a broad range of disciplines, including nanotechnology, engineering, materials science and physics.
Download or read book Nanotubes and Nanowires written by C N Ram Rao and published by Royal Society of Chemistry. This book was released on 2015-10-09 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and literature on nanomaterials has exploded in volume in recent years. Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, and they demonstrate a wide range of interesting properties. Many of these properties, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from a vast array of inorganic materials and provide great scope for further research into their properties and possible applications. This book provides a comprehensive and up-to-date survey of the research areas of carbon nanotubes, inorganic nanotubes and nanowires including: synthesis; characterisation; properties; applications Nanotubes and Nanowires includes an extensive list of references and is ideal both for graduates needing an introduction to the field of nanomaterials as well as for professionals and researchers in academia and industry.
Download or read book Scanning Probe Studies of Structural and Functional Properties of Ferroelectric Domains and Domain Walls written by Philippe Tückmantel and published by Springer Nature. This book was released on 2021-04-26 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the fascinating properties of domain walls in ferroelectric materials. Domain walls can be used as model systems to study fundamental aspects of interface physics, such as crackling noise, with implications extending to a broad variety of systems, from material fracture and earthquakes to solar flares and collective decision making. Ferroelectric domain walls also show functional properties absent from the domains themselves, such as enhanced conduction leading to the tantalizing possibility of reconfigurable nanoelectronic circuitry where domain walls are active components. This work discusses the crackling physics of domain walls in thin films of Pb(Zr0.2Ti0.8)O3, as well as links between the local conductivity of domain walls and nanoscale geometrical distortions due to defects, and discusses unusual polarization textures with rotational components at crossings of ferroelastic twin domains. The results presented in this thesis have important implications for the experimental study of crackling systems.
Download or read book Nanoscale Photonics and Optoelectronics written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intersection of nanostructured materials with photonics and electronics shows great potential for clinical diagnostics, sensors, ultrafast telecommunication devices, and a new generation of compact and fast computers. Nanophotonics draws upon cross-disciplinary expertise from physics, materials science, chemistry, electrical engineering, biology, and medicine to create novel technologies to meet a variety of challenges. This is the first book to focus on novel materials and techniques relevant to the burgeoning area of nanoscale photonics and optoelectronics, including novel-hybrid materials with multifunctional capabilities and recent advancements in the understanding of optical interactions in nanoscale materials and quantum-confined objects. Leading experts provide a fundamental understanding of photonics and the related science and technology of plasmonics, polaritons, quantum dots for nanophotonics, nanoscale field emitters, near-field optics, nanophotonic architecture, and nanobiophotonic materials.
Download or read book Scanning Probe Microscopy in Nanoscience and Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-01-22 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical and technical foundation of the state-of-the-art in applied scanning probe techniques. It constitutes a comprehensive overview of SPM applications. The chapters are written by leading researchers and application scientists.
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Nanotube Superfiber Materials written by Lakshman K. Randeniya and published by Elsevier Inc. Chapters. This book was released on 2013-09-16 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter discusses fabrication of carbon nanotube yarn and coating of metals and nonmetals onto the yarn to increase electrical conductivity. An increase in weight due to the metal particle coating is the trade-off for achieving increased electrical conductivity. Electrical conductors made from the hybrid alloy yarn may have multiple applications including in electrical conductors and transmission lines. Carbon nanotube yarns also show potential as microelectrodes and robust and flexible chemiresistors for molecular detection. The decoration of metal nanoclusters on the yarn provides high sensitivity and selectivity to gases that are present in industrial and environmental emissions. Overall, coating yarn with particles produces a multifunctional material that opens up new design possibilities for applications.
Download or read book Physics and Chemistry of Nano structured Materials written by Shihe Yang and published by CRC Press. This book was released on 2003-09-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of nanostructured materials represents a new and fast evolving application of recent research in physics and chemistry. Novel experimental tools coupled with new theory have made this possible. Topics covered in this book include nanocrystals, semiconductor heterostructures, nanotubes, nanowires, and manipulation and fabrication tec
