Download or read book Proactive Condition Monitoring of Low Speed Machines written by Zhaklina Stamboliska and published by Springer. This book was released on 2014-11-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadens readers’ understanding of proactive condition monitoring of low- speed machines in heavy industries. It focuses on why low-speed machines are different than others and how maintenance of these machines should be implemented with particular attention. The authors explain the best available monitoring techniques for various equipment and the principle of how to get proactive information from each technique. They further put forward possible strategies for application of FEM for detection of faults and technical assessment of machinery. Implementation phases are described and industrial case studies of proactive condition monitoring are included. Proactive Condition Monitoring of Low-Speed Machines is an essential resource for engineers and technical managers across a range of industries as well as design engineers working in industrial product development.
Download or read book Design of an Intelligent Embedded System for Condition Monitoring of an Industrial Robot written by Alaa Abdulhady Jaber and published by Springer. This book was released on 2016-09-08 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces a successfully designed and commissioned intelligent health monitoring system, specifically for use on any industrial robot, which is able to predict the onset of faults in the joints of the geared transmissions. However the developed embedded wireless condition monitoring system leads itself very well for applications on any power transmission equipment in which the loads and speeds are not constant, and access is restricted. As such this provides significant scope for future development. Three significant achievements are presented in this thesis. First, the development of a condition monitoring algorithm based on vibration analysis of an industrial robot for fault detection and diagnosis. The combined use of a statistical control chart with time-domain signal analysis for detecting a fault via an arm-mounted wireless processor system represents the first stage of fault detection. Second, the design and development of a sophisticated embedded microprocessor base station for online implementation of the intelligent condition monitoring algorithm, and third, the implementation of a discrete wavelet transform, using an artificial neural network, with statistical feature extraction for robot fault diagnosis in which the vibration signals are first decomposed into eight levels of wavelet coefficients.
Download or read book Surface Mining Machines written by Eugeniusz Rusiński and published by Springer. This book was released on 2017-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.
Download or read book Advances in Manufacturing Production Management and Process Control written by Waldemar Karwowski and published by Springer. This book was released on 2018-06-26 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using 3D printers, rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Other key topics include digital modeling systems and additive manufacturing, together with their applications in a number of fields, e.g in bioengineering/biomedicine, in the aerospace, maritime and military fields or for archeological and historical purposes, such as preserving structures, but not limited to this. The book is based on three AHFE 2018 affiliated conferences i.e. the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE 2018 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2018 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, which were held on July 21-25, 2018, in Orlando, Florida, USA.
Download or read book Operations Management written by Antonella Petrillo and published by BoD – Books on Demand. This book was released on 2021-03-03 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global competition has caused fundamental changes in the competitive environment of the manufacturing and service industries. Firms should develop strategic objectives that, upon achievement, result in a competitive advantage in the market place. The forces of globalization on one hand and rapidly growing marketing opportunities overseas, especially in emerging economies on the other, have led to the expansion of operations on a global scale. The book aims to cover the main topics characterizing operations management including both strategic issues and practical applications. A global environmental business including both manufacturing and services is analyzed. The book contains original research and application chapters from different perspectives. It is enriched through the analyses of case studies.
Download or read book Proceedings of the 13th International Scientific Conference written by Eugeniusz Rusiński and published by Springer. This book was released on 2017-03-27 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the 13th International Conference on Computer Aided Engineering present selected papers from the event, which was held in Polanica Zdrój, Poland, from June 22 to 25, 2016. The contributions are organized according to thematic sections on the design and manufacture of machines and technical systems; durability prediction; repairs and retrofitting of power equipment; strength and thermodynamic analyses for power equipment; design and calculation of various types of load-carrying structures; numerical methods for dimensioning materials handling; and long-distance transport equipment. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances in this dynamic field.
Download or read book Innovations in Mechanical Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovation in mechanical engineering, spanning from engineering design and testing of medical devices, evaluation of new materials and composites for different industrial applications, fatigue and stress analysis of mechanical structures, and application of new tools such as 3D printing, CAE 3D models, and decision support systems. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.
Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.
Download or read book Profitable Condition Monitoring written by BKN Rao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: To engineer and manufacture is human. Manufactured goods are subjected to severe international competitive forces. Consumers' perceptions towards total quality, reliable performance, health and safety, environmental issues, energy conservation and cost of ownership are changing day by day. Manufacturers have no alternative but to satisfy the consumer's increasing demands with maximum efficiency and profitability with minimum delay. Failure to meet such a challenge is clearly undesirable and will, no doubt, result in the closure of manufacturing activities, which is still regarded by many as the backbone of our national economy. Manufacturing for profitability should be the number one concern of all serious minded and responsible people. To help the industries to meet these challenges and to manage efficiently well into 1990s and beyond, the Technical Advisory Committee in their wisdom decided the appropriate theme, Profitable Condition Monitoring, for this year's International Conference, to coincide with the great European market to be opened in 1993. The benefits from condition monitoring are well documented. Condition monitoring is now an affordable technology which is waiting to be fully exploited by all sectors of industry, both big and small. Many companies have realised the following benefits from condition monitoring: • optimisation of profits • maximisation of production • cost-effective maintenance • minimisation of product liability • maximisation of total quality. As the contents of this proceedings reveal, there have been a number of significant advances in condition monitoring of which companies ought to be taking full advantage.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Alfonso Fernandez Del Rincon and published by Springer. This book was released on 2019-02-07 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Download or read book Condition Monitoring of Machinery in Non Stationary Operations written by Tahar Fakhfakh and published by Springer Science & Business Media. This book was released on 2012-03-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring of machines in non-stationary operations (CMMNO) can be seen as the major challenge for research in the field of machinery diagnostics. Condition monitoring of machines in non-stationary operations is the title of the presented book and the title of the Conference held in Hammamet - Tunisia March 26 – 28, 2012. It is the second conference under this title, first took place in Wroclaw - Poland , March 2011. The subject CMMNO comes directly from industry needs and observation of real objects. Most monitored and diagnosed objects used in industry works in non-stationary operations condition. The non-stationary operations come from fulfillment of machinery tasks, for which they are designed for. All machinery used in different kind of mines, transport systems, vehicles like: cars, buses etc, helicopters, ships and battleships and so on work in non-stationary operations. The papers included in the book are shaped by the organizing board of the conference and authors of the papers. The papers are divided into five sections, namely: Condition monitoring of machines in non-stationary operations Modeling of dynamics and fault in systems Signal processing and Pattern recognition Monitoring and diagnostic systems Noise and vibration of machines The presented book gives the back ground to the main objective of the CMMNO 2012 conference that is to bring together scientific community to discuss the major advances in the field of machinery condition monitoring in non-stationary conditions.
Download or read book Handbook of Condition Monitoring written by A. Davies and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's competitive climate the economies of production have become a critical factor for all manufacturing companies. For this reason, achieving cost-effective plant maintenance is highly important. In this context monitoring plays a vital role. The purpose of this book is to inform readers about techniques currently available in the field of condition monitoring, and the methodology used in their application. With contributions from experts throughout the world, the Handbook of Condition Monitoring addresses the four major technique areas in condition monitoring in addition to the latest developments in condition monitoring research. Significantly, the Handbook of Condition Monitoring includes the following features: comprehensive coverage of the full range of techniques and methodologies accepted knowledge and new developments both technical and managerial content. This is the essential reference book for maintenance technicians, engineers, managers and researchers as well as graduate students involved in manufacturing and mechanical engineering, and condition monitoring.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Fakher Chaari and published by Springer. This book was released on 2015-07-16 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.
Download or read book Condition Monitoring with Vibration Signals written by Asoke K. Nandi and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoring—guiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.
Download or read book Machine Condition Monitoring written by Ray S. Beebe and published by . This book was released on 1995 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Condition Monitoring written by Ron Barron and published by Prentice Hall. This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance can account for an extremely large proportion of the operating costs of machinery. Additionally, the downtime caused by machine breakdowns can severely affect the productivity of factories or the safety of products. Thus, it is becoming increasingly important for companies to consider the monitoring of their equipment 'in situ' in order to reduce the number of breakdowns experienced and to avoid the unnecessary cost and delay caused by repairs. Engineering Condition Monitoring provides an overview of all aspects of this important technique paying special attention to the vibration analysis of rotating machines. The text will be suitable for industrial practitioners and managers along with postgraduate students involved in mechanical and manufacturing engineering. The authors have used their vast collective experience both in industry and as academic teachers to produce a broad, descriptive text, concentrating on practical aspects, that will be invaluable to anyone involved in the operation or sub-contracting of condition monitoring methods.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Anna Timofiejczuk and published by Springer. This book was released on 2017-09-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2016, held on September 12 – 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.
