Download or read book Principles of the Austenitization of Steels written by C.R. Brooks and published by Springer Science & Business Media. This book was released on 1992-11-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the principles of the response of steels to the austenitizing process and is intended to act as a source book for information and review purposes for metallurgists, metallurgical engineers and other materials scientists.
Download or read book Steel Metallurgy for the Non Metallurgist written by John D. Verhoeven and published by ASM International. This book was released on 2007-01-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts--beginning at the level of high-school chemistry classes--and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. It was inspired by the author when working with practicing bladesmiths for more than 15 years. Most chapters in the book contain a summary at the end. These summaries provide a short review of the contents of each chapter. This book is THE practical primer on steel metallurgy for those who heat, forge, or machine steel.
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book PRACTICAL HEAT TREATING written by JON L. DOSSETT and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels written by Charlie R. Brooks and published by ASM International. This book was released on with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.
Download or read book Microstructure And Properties Of Materials Vol 2 written by James C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.
Download or read book PHYSICAL METALLURGY PRINCIPLES AND PRACTICE Third Edition written by RAGHAVAN, V. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-11-10 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-established book, now in its Third Edition, presents the principles and applications of engineering metals and alloys in a highly readable form. This new edition retains all the basic topics covered in earlier editions such as phase diagrams, phase transformations, heat treatment of steels and nonferrous alloys, shape memory alloys, solidification, fatigue, fracture and corrosion, as well as applications of engineering alloys. A new chapter on ‘Nanomaterials’ has been added (Chapter 8). The field of nano-materials is interdisciplinary in nature, covering many disciplines including physical metallurgy. Intended as a text for undergraduate courses in Metallurgical and Materials Engineering, the book is also suitable for students preparing for associate membership examination of the Indian Institute of Metals (AMIIM) and other professional examinations like AMIE.
Download or read book Fundamentals of Physical Metallurgy written by John D. Verhoeven and published by John Wiley & Sons. This book was released on 1975 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for students who have already taken an introductory course in metallurgy or materials science, this advanced text describes how structures control the mechanical properties of metals.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.
Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while inc
Download or read book Bainite and Martensite written by Carlos Garcia-Mateo and published by MDPI. This book was released on 2020-05-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructures of both martensite and bainite, although sharing some common features, depict a plethora of subtle differences that made them unique when studied in further detail. Tailoring the final properties of a microstructure based on one or the other as well as in combination with others and exploring more sophisticated concepts, such as Q&P and nanostructured bainite, are the topics which are the focus of research around the world. In understanding the key microstructural parameters controlling the final properties as well as definition of adequate process parameters to attain the desired microstructures requires that a proper understanding of the mechanism ruling their transformation and a detailed characterization first be acheived. The development of new and powerful scientific techniques and equipment (EBSD, APT, HRTEM, etc.) allow us to gain fundamental insights that help to establish some of the principles by which those microstructures are known. The developments accompanying such findings lead to further developments and intensive research providing the required metallurgical support.
Download or read book Principles of the Surface Treatment of Steel written by Charlie R. Brooks and published by CRC Press. This book was released on 1992-02-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Technology of Steel Castings written by Jan Głownia and published by Bentham Science Publishers. This book was released on 2017-12-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Technology of Steel Castings is a comprehensive textbook for students and professional engineers in the field of foundry engineering and materials science. The topics covered in this book explain the association between the quality of liquid metal and the properties of the finished cast. Readers will learn about the thermodynamic conditions for addition and recovery of chemical elements (such as Cr, Ni and Mo) in steel, degasifying processes, the influence of alloying additives for manufacturing steel castings that operate in extreme temperatures, anti-corrosive steels and basic cast conditions for making the castings (pouring and heat treatment systems). Metallurgy and Technology of Steel Castings gives readers essential information about steel and steel cast manufacturing processes and equips them with the knowledge to overcome the challenges faced in the foundry environment.
