Download or read book Microelectronic Circuit Design for Energy Harvesting Systems written by Maurizio Di Paolo Emilio and published by Springer. This book was released on 2016-12-01 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design.
Download or read book Fundamental Principles of Optical Lithography written by Chris Mack and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.
Download or read book Semiconductors for Micro and Nanotechnology written by Jan G. Korvink and published by Wiley-VCH. This book was released on 2002-07-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors play a major role in modern microtechnology, especially in microelectronics. Since the dimensions of new microelectronic components, e.g. computer chips, now reach nanometer size, semiconductor research moves from microtechnology to nanotechnology. An understanding of the semiconductor physics involved in this new technology is of great importance for every student in engineering, especially electrical engineering, microsystem technology and physics. This textbook emphasizes a system-oriented view of semiconductor physics for applications in microsystem technology. While existing books only cover electronic device physics and are mainly written for physics students, this text gives a more hands-on approach to semiconductor physics and so avoids overloading engineering students with mathematical formulas not essential for their studies.
Download or read book Introduction to Microelectronic Fabrication written by Richard C. Jaeger and published by Pearson. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Theory and Fabrication of Integrated Circuits. The author's goal in writing this text was to present a concise survey of the most up-to-date techniques in the field. It is devoted exclusively to processing, and is highlighted by careful explanations, clear, simple language, and numerous fully-solved example problems. This work assumes a minimal knowledge of integrated circuits and of terminal behavior of electronic components such as resistors, diodes, and MOS and bipolar transistors.
Download or read book Analysis and Design Principles of MEMS Devices written by Minhang Bao and published by Elsevier. This book was released on 2005-04-12 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors and actuators are now part of our everyday life and appear in many appliances, such as cars, vending machines and washing machines. MEMS (Micro Electro Mechanical Systems) are micro systems consisting of micro mechanical sensors, actuators and micro electronic circuits. A variety of MEMS devices have been developed and many mass produced, but the information on these is widely dispersed in the literature. This book presents the analysis and design principles of MEMS devices. The information is comprehensive, focusing on microdynamics, such as the mechanics of beam and diaphragm structures, air damping and its effect on the motion of mechanical structures. Using practical examples, the author examines problems associated with analysis and design, and solutions are included at the back of the book. The ideal advanced level textbook for graduates, Analysis and Design Principles of MEMS Devices is a suitable source of reference for researchers and engineers in the field.* Presents the analysis and design principles of MEMS devices more systematically than ever before.* Includes the theories essential for the analysis and design of MEMS includes the dynamics of micro mechanical structures* A problem section is included at the end of each chapter with answers provided at the end of the book.
Download or read book Microelectronic Materials and Processes written by R.A. Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Plasma Electronics written by Toshiaki Makabe and published by CRC Press. This book was released on 2006-03-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without plasma processing techniques, recent advances in microelectronics fabrication would not have been possible. But beyond simply enabling new capabilities, plasma-based techniques hold the potential to enhance and improve many processes and applications. They are viable over a wide range of size and time scales, and can be used for deposition,
Download or read book Microelectronic Devices written by Keith Leaver and published by World Scientific. This book was released on 1997 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this introductory book sets out clearly and concisely the principles of operation of the semiconductor devices that lie at the heart of the microelectronic revolution. The book aims to teach the reader how semiconductor devices are modelled. It begins by providing a firm background in the relevant semiconductor physics. These ideas are then used to construct both circuit models and mathematical models for diodes, bipolar transistors and MOSFETs. It also describes the processes involved in fabricating silicon chips containing these devices. The first edition has already proved a highly useful textbook to first and second year degree students in electrical and electronic engineering, and related disciplines. It is also useful to HND students in similar subject areas, and as supplementary reading for anyone involved in integrated circuit design and fabrication.
Download or read book Microsystem Technology in Chemistry and Life Sciences written by Andreas Manz and published by Springer Science & Business Media. This book was released on 2003-09-05 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: "WHAT DOES NOT NEED TO BE BIG, WILL BE SMALL", a word by an engineer at a recent conference on chips technology. This sentence is particularly true for chemistry. Microfabrication technology emerged from microelectronics into areas like mechanics and now chemistry and biology. The engineering of micron and submicron sized features on the surface of silicon, glass and polymers opens a whole new world. Micromotors smaller than human hair have been fabricated and they work fine. It is the declared goal of the authors to bring these different worlds together in this volume. Authors have been carefully chosen to guarantee for the quality of the contents. An engineer, a chemist or a biologist will find new impulses from the various chapters in this book.
Download or read book Introduction to Microelectronics to Nanoelectronics written by Manoj Kumar Majumder and published by CRC Press. This book was released on 2020-11-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on micro- and nanoelectronics design and technology, this book provides thorough analysis and demonstration, starting from semiconductor devices to VLSI fabrication, designing (analog and digital), on-chip interconnect modeling culminating with emerging non-silicon/ nano devices. It gives detailed description of both theoretical as well as industry standard HSPICE, Verilog, Cadence simulation based real-time modeling approach with focus on fabrication of bulk and nano-devices. Each chapter of this proposed title starts with a brief introduction of the presented topic and ends with a summary indicating the futuristic aspect including practice questions. Aimed at researchers and senior undergraduate/graduate students in electrical and electronics engineering, microelectronics, nanoelectronics and nanotechnology, this book: Provides broad and comprehensive coverage from Microelectronics to Nanoelectronics including design in analog and digital electronics. Includes HDL, and VLSI design going into the nanoelectronics arena. Discusses devices, circuit analysis, design methodology, and real-time simulation based on industry standard HSPICE tool. Explores emerging devices such as FinFETs, Tunnel FETs (TFETs) and CNTFETs including their circuit co-designing. Covers real time illustration using industry standard Verilog, Cadence and Synopsys simulations.
Download or read book Microelectronic Circuit Design written by Richard C. Jaeger and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic Circuit Designis known for being a technically excellent text. The new edition has been revised to make the material more motivating and accessible to students while retaining a student-friendly approach.Jaeger has added more pedagogy and an emphaisis on design through the use of design examples and design notes. Some pedagogical elements include chapter opening vignettes, chapter objectives, "Electronics in Action" boxes, a problem solving methodology, and "design note" boxes. The number of examples, including new design examples, has been increased, giving students more opportunity to see problems worked out. Additionally,some of the less fundamental mathematical material has been moved to the ARIS website. In addition this edition comes with aHomework Management System called ARIS, which includes 450 static problems.
Download or read book Solid State Devices and Technology written by Babu V Suresh and published by Pearson Education India. This book was released on 2010-09 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Microelectromechanical Systems written by Ki Bang Lee and published by John Wiley & Sons. This book was released on 2011-03-21 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The building blocks of MEMS design through closed-form solutions Microelectromechanical Systems, or MEMS, is the technology of very small systems; it is found in everything from inkjet printers and cars to cell phones, digital cameras, and medical equipment. This book describes the principles of MEMS via a unified approach and closed-form solutions to micromechanical problems, which have been recently developed by the author and go beyond what is available in other texts. The closed-form solutions allow the reader to easily understand the linear and nonlinear behaviors of MEMS and their design applications. Beginning with an overview of MEMS, the opening chapter also presents dimensional analysis that provides basic dimensionless parameters existing in large- and small-scale worlds. The book then explains microfabrication, which presents knowledge on the common fabrication process to design realistic MEMS. From there, coverage includes: Statics/force and moment acting on mechanical structures in static equilibrium Static behaviors of structures consisting of mechanical elements Dynamic responses of the mechanical structures by the solving of linear as well as nonlinear governing equations Fluid flow in MEMS and the evaluation of damping force acting on the moving structures Basic equations of electromagnetics that govern the electrical behavior of MEMS Combining the MEMS building blocks to form actuators and sensors for a specific purpose All chapters from first to last use a unified approach in which equations in previous chapters are used in the derivations of closed-form solutions in later chapters. This helps readers to easily understand the problems to be solved and the derived solutions. In addition, theoretical models for the elements and systems in the later chapters are provided, and solutions for the static and dynamic responses are obtained in closed-forms. This book is designed for senior or graduate students in electrical and mechanical engineering, researchers in MEMS, and engineers from industry. It is ideal for radio frequency/electronics/sensor specialists who, for design purposes, would like to forego numerical nonlinear mechanical simulations. The closed-form solution approach will also appeal to device designers interested in performing large-scale parametric analysis.
Download or read book Fundamentals of Microelectronics written by Behzad Razavi and published by John Wiley & Sons. This book was released on 2013-04-08 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microelectronics, 2nd Edition is designed to build a strong foundation in both design and analysis of electronic circuits this text offers conceptual understanding and mastery of the material by using modern examples to motivate and prepare readers for advanced courses and their careers. The books unique problem-solving framework enables readers to deconstruct complex problems into components that they are familiar with which builds the confidence and intuitive skills needed for success.
Download or read book Microelectronics Processing written by Dennis W. Hess and published by . This book was released on 1989 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although chemical engineering principles are at the heart of solid state process technology, until now no reference volume addressing this relationship was available. This is the first book of its kind to tie fundamental engineering concepts to solid state process technology. Discussing the basic concepts involved--liquid-phase epitaxy, physical and chemical vapor deposition, diffusion and oxidation in silicon, resists in microlithography, etc.--this volume will be particularly useful in chemical engineering courses. It offers a framework within which specialized courses in microelectronics processing can be organized. In addition, it serves as a valuable reference source for all industrial engineers working with the individual process steps covered.
Download or read book Micro and Nanofabrication for Beginners written by Eiichi Kondoh and published by CRC Press. This book was released on 2022-06-13 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the fundamentals of micro- and nanofabrication are described on the basis of the concept of “using gases as a fabrication tool.” Unlike other books available on the subject, this volume assumes only entry-level mathematics, physics, and chemistry of undergraduates or high-school students in science and engineering courses. Necessary theories are plainly explained to help the reader learn about this new attractive field and enable further reading of specialized books. The book is an attractive guide for students, young engineers, and anyone getting involved in micro- and nanofabrication from various fields including physics, electronics, chemistry, and materials sciences.