Download or read book Principles and Practice of Explosive Metalworking written by Arthur Abraham Ezra and published by . This book was released on 1973 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosives Engineering written by Paul W. Cooper and published by John Wiley & Sons. This book was released on 2018-07-19 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text, and Cooper's companion introductory text ('Introduction to the Technology of Explosives'), serve the same markets as the successful explosives reference by Meyer, now in its 4th edition. VCH also published the International Journal of Propellants, Explosives, and Pyrotechnics. The resulting package would give VCH the major presence in the field. This text presents the basic technologies used in the engineering of explosives and explosive systems, i.e., chemistry, burning, detonation, shock waves, initiation theories, scaling. The book is written for upper-division undergraduate or graduate-level scientists and engineers, and assumes a good grasp of basic physics, chemistry, mechanics and mathematic through calculus. It is based on lecture notes used for graduate courses at the Dept. of Energy Laboratories, and could serve as a core text for a course at schools of mining or military engineering. The intent of the book is to provide the engineer or scientist in the field with an understanding of the phenomena involved and the engineering tools needed to solve/ design/ analyze a broad range of real problems.
Download or read book Explosive Welding Forming and Compaction written by T.Z. Blazynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have seen a steady and impressive development, and eventual industrial acceptance, of the high energy-rate manufact turing techniques based on the utilisation of energy available in an explo sive charge. Not only has it become economically viable to fabricate complex shapes and integrally bonded composites-which otherwise might not have been obtainable easily, if at all-but also a source of reasonably cheap energy and uniquely simple techniques, that often dispense with heavy equipment, have been made available to the engineer and applied scientist. The consolidation of theoretical knowledge and practical experience which we have witnessed in this area of activity in the last few years, combined with the growing industrial interest in the explosive forming, welding and compacting processes, makes it possible and also opportune to present, at this stage, an in-depth review of the state of the art. This book is a compendium of monographic contributions, each one of which represents a particular theoretical or industrial facet of the explosive operations. The contributions come from a number of practising engineers and scientists who seek to establish the present state of knowledge in the areas of the formation and propagation of shock and stress waves in metals, their metallurgical effects, and the methods of experimental assessment of these phenomena.
Download or read book High velocity Metalworking written by Midwest Research Institute (Kansas City, Mo.) and published by . This book was released on 1967 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Shock Waves Three Volume Set written by Gabi Ben-Dor and published by Elsevier. This book was released on 2000-10-18 with total page 2188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Shock Waves contains a comprehensive, structured coverage of research topics related to shock wave phenomena including shock waves in gases, liquids, solids, and space. Shock waves represent an extremely important physical phenomena which appears to be of special practical importance in three major fields: compressible flow (aerodynamics), materials science, and astrophysics. Shock waves comprise a phenomenon that occurs when pressure builds to force a reaction, i.e. sonic boom that occurs when a jet breaks the speed of sound.This Handbook contains experimental, theoretical, and numerical results which never before appeared under one cover; the first handbook of its kind.The Handbook of Shock Waves is intended for researchers and engineers active in shock wave related fields. Additionally, R&D establishments, applied science & research laboratories and scientific and engineering libraries both in universities and government institutions. As well as, undergraduate and graduate students in fluid mechanics, gas dynamics, and physics. Key Features* Ben-Dor is known as one of the founders of the field of shock waves* Covers a broad spectrum of shock wave research topics* Provides a comprehensive description of various shock wave related subjects* First handbook ever to include under one separate cover: experimental, theoretical, and numerical results
Download or read book Current Advances in Mechanical Design Production III written by S. E. A. Bayoumi and published by Elsevier. This book was released on 2016-08-04 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date account of modern trends, techniques and case studies in the important fields of analysis and design of mechanical systems and components, production technology and industrial engineering. Topics covered include fail safe and stress analysis, dynamic analysis and control, vibrations, materials technology, manufacturing technology and productivity and computer-aided analysis of manufacturing processes. Contains 52 papers.
Download or read book The Journal of the Iron and Steel Institute written by Iron and Steel Institute and published by . This book was released on 1968 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes the institute's Proceedings.
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Defence Science Journal written by and published by . This book was released on 1984 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Waves and High Strain Rate Phenomena in Metals written by Mare Meyers and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific understanding of high-velocity deformation has advanced substantially during the past decade. On the one hand, the framework for a theory explaining the metallurgical effects of shock waves is beginning to take shape; on the other hand, the technological applications of high strain-rate processes have found their way into industries in countries around the world. Ex plosive cladding, welding, forming, compaction and consolidation, cutting, and hardening, in addition to high energy-rate deformation processes using other energy sources, are some of the topics of contemporary technological importance. Metallurgical effects are of the utmost importance in both the scientific understanding of the phenomena involved, and in the successful development and utilization of the associated applications. The international conference upon which this book is based had as its major objectives the acceleration of progress in the field of high-strain rate deformation and fabrication, including applications, by providing a forum for the exchange of state-of-the art information on the metallurgical effects of high strain-rate deformation and fabrication; and the organization of this informa tion into a timely and coherent body of knowledge focused around significant areas and applications. This volume is a manifestation of these objectives. In addition, the contents of this book were organized to provide for a somewhat logical perspective of the fundamentals, development, and state-of-the-art applications of high strain-rate and shock phenomena.
Download or read book Advances in Deformation Processing written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has con ducted the Sagamore Army Materials Research Conference in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University since 1954. The purpose of the conference has been to gather to gether scientists and engineers from academic institutions, in dustry and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. This volume, Advances in Deformation Processing, addresses the areas of Analytical Advances, Workability, Processing to Optimize Properties, Advanced Applications - Materials, and Advanced Applications - Processes. The dedicated assistance of Mr. Joseph Bernier of the Army Materials and Mechanics Research Center throughout the stages of the conference planning and finally the publication of the Sagamore Conference Proceedings is deeply appreciated. The support of Helen Brown DeMascio of Syracuse University in p- paring the final manuscript is acknowledged. The continued active interest and support of these conferences by Dr. A. E. Gorum, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii Contents SESSION I INTRODUCTION A. E. Gorum, Moderator Continuum Mechanics and Deformation Processing 1.
Download or read book The Shock and Vibration Bulletin written by and published by . This book was released on 1980 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Development of Gas Turbine Materials written by G.W. Meetham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The turbine has many advantages over other prime movers for producing power. The first turbine used water as the working fluid and this principle is still used in hydro-electric power generation. The steam turbine was developed late in the nineteenth century and was first applied to marine propulsion by Parsons in 1897. Since that time it has become the most widely used prime mover in electricity generation and marine propulsion. The equipment required to generate steam is bulky however and it was realised that much more compact power plant could be designed if the hot gases used for steam generation could drive the turbine directly. Early attempts to produce gas turbines were unsuccessful for several reasons, one major problem being that materials with the capability of operating at sufficiently high stresses and temperatures were not available. Following the first experimental Whittle engine in 1937, the emphasis on the development of the gas turbine engine for aircraft propulsion during World War II changed this situation dramatically. Gas turbine powered civil aircraft entered airline service in the early 1950s and gas turbines also began to compete successfully in other fields. Apart from the aircraft market, they have been used widely in pumping sets for oil and gas transmission pipelines and peak load electricity generation. Use in warship propulsion is increasing and there is currently major activity, in the USA in particular, in developments for vehicular propulsion.
Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.
Download or read book The Foundry Trade Journal written by and published by . This book was released on 1973 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Armor written by and published by . This book was released on 2003 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
