Download or read book Primer on Flat Rolling written by John G. Lenard and published by Newnes. This book was released on 2013-12-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primer on Flat Rolling is a fully revised second edition, and the outcome of over three decades of involvement with the rolling process. It is based on the author's yearly set of lectures, delivered to engineers and technologists working in the rolling metal industry. The essential and basic ideas involved in designing and analysis of the rolling process are presented. The book discusses and illustrates in detail the three components of flat rolling: the mill, the rolled metal, and their interface. New processes are also covered; flexible rolling and accumulative roll-bonding. The last chapter contains problems, with solutions that illustrate the complexities of flat rolling. New chapters include a study of hot rolling of aluminum, contributed by Prof. M. Wells; advanced applications of the finite element method, by Dr. Yuli Liu and by Dr. G. Krallics; roll design by Dr. J. B. Tiley and the history of the development of hot rolling mills, written by Mr. D. R. Adair and E. B. Intong. Engineers, technologists and students can all use this book to aid their planning and analysis of flat rolling processes. - Provides clear descriptions for engineers and technologists working in steel mills - Evaluates the predictive capabilities of mathematical models - Assignments and their solutions are included within the text

Download or read book Primer on Automotive Lightweighting Technologies written by Raghu Echempati and published by CRC Press. This book was released on 2021-04-29 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum is increasingly replacing steel in automotive applications due to its superior strength-to-weight ratio, equal or better stiffness and toughness properties, durability, and manufacturability considerations. Primer on Automotive Lightweighting Technologies introduces basic ideas and principles of designing and engineering automotive components with aluminum. Topics include application of the knowledge to understand how automotive body and structures are designed, as well as other major and smaller automotive components, such as engine blocks and their components, chassis systems, and wheels. Features Discusses material considerations in engineering design Describes mechanical and physical properties of aluminum Covers manufacturing methods and automotive and industrial applications of aluminum products Offers information on design for functional performance and cost optimization Includes coverage of extruded and rolled products and car body structure This practical book is aimed at professionals in the fields of materials and mechanical engineering, automotive engineering, and metals and alloys, as well as advanced students and researchers.

Download or read book Tandem Hot Metal Rolling Mill Control written by John Pittner and published by Springer Nature. This book was released on with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Applications of Metal Rolling written by Siddhartha Ray and published by Cambridge University Press. This book was released on 2016-04-21 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling is an important metal forming process which involves the passing of metal stock through a pair of rollers. It is categorized depending on the recrystallization temperature of the metal rolled. This book covers the entire gamut of rolling technology in one volume. It begins with a brief history of rolling, and goes on to discuss different rolling processes, the deformation of materials, and the classification of rolling mills and stands. The book discusses rolling applications of steel blooms, slabs, bars, plates, rods, heavy sections and non-ferrous metals in detail. It covers important rolling process parameters, including rolling friction, stress and strain across rolled strip thickness, rolling torque and power and roll separation force. It also provides details on the design and applications of various rolling equipment, including mill rolls, neck bearings, spindles, coilers and decoilers.

Download or read book Applied Informatics written by Hector Florez and published by Springer Nature. This book was released on 2020-10-19 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed papers of the Second International Conference on Applied Informatics, ICAI 2020, held in Ota, Nigeria, in October 2020. The 35 full papers were carefully reviewed and selected from 101 submissions. The papers are organized in topical sections on artificial intelligence; business process management; cloud computing; data analysis; decision systems; health care information systems; human-computer interaction; image processing; learning management systems; software design engineering.

Download or read book Tandem Cold Metal Rolling Mill Control written by John Pittner and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a novel and practical advanced method for control of tandem cold metal rolling processes based on the emerging state-dependent Riccati equation technique. After a short history of tandem cold rolling, various types of cold rolling processes are described. A basic mathematical model of the process is discussed, and the diverse conventional control methods are compared. A detailed treatment of the theoretical and practical aspects of the state-dependent algebraic Riccati equation technique is given, with specific details of the new procedure described and results of simulations performed to verify the control model and overall system performance with the new controller coupled to the process model included. These results and data derived from actual operating mills are compared showing the improvements in performance using the new method. Material is included which shows how the new technique can be extended to the control of a broad range of large-scale complex nonlinear processes.

Download or read book Applied Metal Forming written by Henry S. Valberg and published by Cambridge University Press. This book was released on 2010-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional reference for advanced courses in two of the most common manufacturing processes: metal forming and metal cutting.

Download or read book Design and Analysis of Materials and Engineering Structures written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2012-10-05 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of this monograph is to present the latest results related to design and analysis of materials and engineering structures. The contributions cover the field of mechanical and civil engineering, ranging from automotive to dam design, transmission towers and up to machine design and exmaples taken from oil industry. Well known experts present their research on damage and fracture of material and structures, materials modelling and evaluation up to image processing and visualization for advanced analyses and evaluation

Download or read book Tribology and Sustainability written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-08-26 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Sustainability brings a vision of promoting a greener, cleaner and eco-friendly environment by highlighting sustainable solutions in tribology via the development of self-lubricating materials, green additives in lubricants, natural fibre-reinforced materials and biomimetic approaches. Backed by supporting schematic diagrams, data tables and illustrations for easy understanding, the book focuses on recent advancements in tribology and sustainability. Global sustainability and regional requirements are addressed through chapters on natural composites, green lubricants, biomedical systems and wind energy systems, with a dedicated chapter on a global sustainability scenario. FEATURES Highlights sustainability via new tribological approaches and how such methods are essential Covers the theoretical aspects of various tribological topics concerning mechanical and material designs for energy-efficient systems Includes practical global sustainability based on the regional requirements of tribological research and sustainable impact Reviews the tribology of green lubricants, green additives and lightweight materials Discusses topics related to biomimetics and biotribology Tribology and Sustainability will assist researchers, professionals and graduate students in tribology, surface engineering, mechanical design and materials engineering, including mechanical, aerospace, chemical and environmental engineering.

Download or read book Carbon Nanomaterials and their Composites as Adsorbents written by J. Tharini and published by Springer Nature. This book was released on with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Materials Engineering written by Maciej Pietrzyk and published by Butterworth-Heinemann. This book was released on 2015-07-14 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Materials Engineering: Achieving High Accuracy and Efficiency in Metals Processing Simulations describes the most common computer modeling and simulation techniques used in metals processing, from so-called "fast" models to more advanced multiscale models, also evaluating possible methods for improving computational accuracy and efficiency. Beginning with a discussion of conventional fast models like internal variable models for flow stress and microstructure evolution, the book moves on to advanced multiscale models, such as the CAFÉ method, which give insights into the phenomena occurring in materials in lower dimensional scales. The book then delves into the various methods that have been developed to deal with problems, including long computing times, lack of proof of the uniqueness of the solution, difficulties with convergence of numerical procedures, local minima in the objective function, and ill-posed problems. It then concludes with suggestions on how to improve accuracy and efficiency in computational materials modeling, and a best practices guide for selecting the best model for a particular application. - Presents the numerical approaches for high-accuracy calculations - Provides researchers with essential information on the methods capable of exact representation of microstructure morphology - Helpful to those working on model classification, computing costs, heterogeneous hardware, modeling efficiency, numerical algorithms, metamodeling, sensitivity analysis, inverse method, clusters, heterogeneous architectures, grid environments, finite element, flow stress, internal variable method, microstructure evolution, and more - Discusses several techniques to overcome modeling and simulation limitations, including distributed computing methods, (hyper) reduced-order-modeling techniques, regularization, statistical representation of material microstructure, and the Gaussian process - Covers both software and hardware capabilities in the area of improved computer efficiency and reduction of computing time

Download or read book Tribology of Polymers Polymer Composites and Polymer Nanocomposites written by Soney C. George and published by Elsevier. This book was released on 2022-10-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Polymers, Polymer Composites, and Polymer Nanocomposites combines fundamental knowledge with the latest findings in the area of polymer tribology. From testing of property-related mechanisms to prediction of wear using artificial neural networks, the book explores all relevant polymer types, including elastomers, epoxy-based, nylon, and more while also discussing their different types of reinforcement, such as particulates, short fibers, natural fibers, and beyond. New developments in sustainable materials, environmental effects, nanoscaled fillers, and self-lubrication are each discussed, as are applications of these materials, guidelines for when to use certain polymer systems, and functional groups of polymers. Experimental methods and modeling and prediction techniques are also outlined. The tribology of graphene-based, biodegradable, hybrid nanofiller/polymer nanocomposites and other types of polymers is discussed at length. - Synthesizes the latest cutting-edge research in the tribological behaviors and applications of polymeric materials - Covers all relevant polymer types and concepts, including elastomers and natural fibers, different types of reinforcement materials, sustainable materials, interfacial modifiers and the environmental effects of self-lubrication - Outlines modeling techniques and how filler-matrix pairings and other approaches can control wear mechanisms

Download or read book Advanced Information Systems Engineering written by Schahram Dustdar and published by Springer Nature. This book was released on 2020-06-02 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 32nd International Conference on Advanced Information Systems Engineering, CAiSE 2020, held in Grenoble, France, in June 2020.* The 33 full papers presented in this volume were carefully reviewed and selected from 185 submissions. The book also contains one invited talk in full paper length. The papers were organized in topical sections named: distributed applications; AI and big data in IS; process mining and analysis; requirements and modeling; and information systems engineering. Abstracts on the CAiSE 2020 tutorials can be found in the back matter of the volume. *The conference was held virtually due to the COVID-19 pandemic.

Download or read book A Primer on Scientific Programming with Python written by Hans Petter Langtangen and published by Springer. This book was released on 2016-07-28 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a first introduction to computer programming of scientific applications, using the high-level Python language. The exposition is example and problem-oriented, where the applications are taken from mathematics, numerical calculus, statistics, physics, biology and finance. The book teaches "Matlab-style" and procedural programming as well as object-oriented programming. High school mathematics is a required background and it is advantageous to study classical and numerical one-variable calculus in parallel with reading this book. Besides learning how to program computers, the reader will also learn how to solve mathematical problems, arising in various branches of science and engineering, with the aid of numerical methods and programming. By blending programming, mathematics and scientific applications, the book lays a solid foundation for practicing computational science. From the reviews: Langtangen ... does an excellent job of introducing programming as a set of skills in problem solving. He guides the reader into thinking properly about producing program logic and data structures for modeling real-world problems using objects and functions and embracing the object-oriented paradigm. ... Summing Up: Highly recommended. F. H. Wild III, Choice, Vol. 47 (8), April 2010 Those of us who have learned scientific programming in Python ‘on the streets’ could be a little jealous of students who have the opportunity to take a course out of Langtangen’s Primer.” John D. Cook, The Mathematical Association of America, September 2011 This book goes through Python in particular, and programming in general, via tasks that scientists will likely perform. It contains valuable information for students new to scientific computing and would be the perfect bridge between an introduction to programming and an advanced course on numerical methods or computational science. Alex Small, IEEE, CiSE Vol. 14 (2), March /April 2012 “This fourth edition is a wonderful, inclusive textbook that covers pretty much everything one needs to know to go from zero to fairly sophisticated scientific programming in Python...” Joan Horvath, Computing Reviews, March 2015

Download or read book Black Decker DIY Roofing written by Editors of Cool Springs Press and published by Cool Springs Press. This book was released on 2018-10-30 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Replacing the roof on your house is an achievable job that can be very rewarding: all you need is good information and a willingness to invest some sweat equity. BLACK+DECKER DIY Roofing gives you the information you need, from selecting and estimating roof coverings to tear-off, sheathing replacement, underlayment and water shield installation, roofing materials installation, and flashing. While a contractor's hardworking crew can replace an average asphalt shingle roof in a day or two, it will cost several thousand dollars. And your roof covering choices are rather limited. By doing the job yourself, you can pocket the savingsor even upgrade to an entirely new type of roof, like cedar shakes, standing seam metal, or fiber cement. With detailed step-by-step photos, you will see all of the most popular roof types installed the correct way, including: Asphalt shingles (three-tab and architectural) EPDM rubber membrane Metal Cedar shakes Clay and concrete tile Roll roofing Faux slate This guide also shows you how to install other elements of your roof system, including gutters, fascia, soffits, and vents. A handy repair section helps ensure that your work keeps your home well protected for as long as possible. Plus, a special section on working safely features all the tools and practices you'll need to stay secure working at heights.

Download or read book Computational Science ICCS 2024 written by Leonardo Franco and published by Springer Nature. This book was released on 2024 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung: The 7-volume set LNCS 14832 - 14838 constitutes the proceedings of the 24th International Conference on Computational Science, ICCS 2024, which took place in Malaga, Spain, during July 2-4, 2024. The 155 full papers and 70 short papers included in these proceedings were carefully reviewed and selected from 430 submissions. They were organized in topical sections as follows: Part I: ICCS 2024 Main Track Full Papers; Part II: ICCS 2024 Main Track Full Papers; Part III: ICCS 2024 Main Track Short Papers; Advances in High-Performance Computational Earth Sciences: Numerical Methods, Frameworks and Applications; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Part IV: Biomedical and Bioinformatics Challenges for Computer Science; Computational Health; Part V: Computational Optimization, Modelling, and Simulation; Generative AI and Large Language Models (LLMs) in Advancing Computational Medicine; Machine Learning and Data Assimilation for Dynamical Systems; Multiscale Modelling and Simulation; Part VI: Network Models and Analysis: From Foundations to Artificial Intelligence; Numerical Algorithms and Computer Arithmetic for Computational Science; Quantum Computing; Part VII: Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks, and Artificial Intelligence; Solving Problems with Uncertainties; Teaching Computational Science

Download or read book Metal Forming Science and Practice written by J.G. Lenard and published by Elsevier. This book was released on 2002-10-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication has been written to honour the contribution to science and education made by the Distinguished Professor Emeritus Professor Schey on his eightieth birthday. The contributors to his book are among the countless researchers who have read, studied and learned from Professor Schey's work, which includes books, research monographs, invited papers, keynote papers, scientific journals and conferences. The topics include manufacturing, sheet and bulk metal forming and tribology, amongst others. The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; An examination of the coefficient of friction; Studies on micro plasto hydrodynamic lubrication in metal forming; Numerical simulation of sheet metal forming; Geometric and mechanics model of sheet forming; Modelling and optimisation of metal forming processes; The mathematical modelling of hot rolling steel; Identification of rheological and tribological parameters; Oxide behaviour in hot rolling; Friction, lubrication and surface response in wire drawing; and Modelling and control of temper rolling and skin pass rolling.