Download or read book Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by Gabriell Ilevbare and published by Springer. This book was released on 2017-07-17 with total page 2354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 15th Edition of the International Conference on Materials Degradation in Light Water Reactors focuses on subject areas critical to the safe and efficient running of nuclear reactor systems through the exchange and discussion of reseach results as well as field operating and management experience.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Numerical Modeling of AAR written by Victor Saouma and published by CRC Press. This book was released on 2014-02-05 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book presents the theory and methodology to conduct a finite element assessment of concrete structures subjected to chemically induced volumetric expansion in general and alkali aggregate reaction in particular. It is limited to models developed by the author, and focuses on how to best address a simple question: if a structure suffers from AAR, how is its structural integrity jeopardized, and when would the reaction end. Subjects treated are: • Brief overview of AAR: nature of the chemical reactions, AAR in both dams and nuclear power plants, and how does it impact the mechanical properties of concrete. • Constitutive model for both the AAR expansion, and concrete nonlinearities (both smeared and discrete crack models). • Validation of the model along with a parametric study to assess what are the critical parameters in a study. • Selection of material properties for an AAR finite element simulation, followed by applications in dams and massive reinforced concrete structures. • Micro Model for improved understanding of the essence of the reaction, along with a newly proposed mathematical model for the kinetics of the reaction. • Review of relevant procedures to estimate the residual expansion of a structure suffering from AAR, along with a proposed approach to determine when the reaction will end. The book is extensively illustrated with numerous figures and provides guidance to engineers confronted with swelling in concrete infrastructures.
Download or read book Sustainability of Life Cycle Management for Nuclear Cementation Based Technologies written by Rehab O. Abdel Rahman and published by Woodhead Publishing. This book was released on 2021-05-25 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability of Life Cycle Management for Nuclear Cementation-Based Technologies, edited by Dr. Rahman and Dr. Ojovan, presents the latest knowledge and research on the management of cementitious systems within nuclear power plants. The book covers aging, development and updates on regulatory frameworks on a global scale, the development of cementitious systems for the immobilization of problematic wastes, and the decommissioning and decontamination of complex cementitious systems. The book's editors and their team of experts combine their practical knowledge to provide the reader with a thorough understanding on the sustainability of lifecycle management of cementitious systems within the nuclear industry. Sections provide a comparative tool that presents national regulations concerning cementitious systems within nuclear power plants, check international and national evaluation results of the sustainability of different systems, help in the development of performance test procedures, and provide a guide on aging nuclear power plants and the long-term behavior of these systems in active and passive safety environments. - Presents the latest information on the behavior of different cementitious systems used in the nuclear industry in one comprehensive resource - Includes scientific justifications of system behavior during the design, operation, maintenance and decommissioning phases - Aids the reader in the development of evaluation tests for problematic wastes
Download or read book Concrete Solutions 2011 written by Michael Grantham and published by CRC Press. This book was released on 2011-09-08 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Solutions series of International Conferences on Concrete Repair began in 2003, with a conference held in St. Malo, France in association with INSA Rennes, followed by the second conference in 2006 ( with INSA again, at St. Malo, France), and the third conference in 2009 (in Padova and Venice, in association with the University of Pado
Download or read book Ageing Management of Concrete Structures in Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA Nuclear Energy. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is one in a series of reports on the assessment and management of ageing of major nuclear power plant (NPP) components. Current practices for assessment of safety margins (fitness for service) and inspection, monitoring and mitigation of ageing related degradation of selected concrete structures related to NPPs are documented. Implications for and differences in new reactor designs are discussed. This information is intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues.
Download or read book Non Destructive Evaluation of Reinforced Concrete Structures Deterioration Processes and Standard Test Methods written by Christiane Maierhofer and published by Woodhead Publishing. This book was released on 2010-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinforced concrete structures. Engineers have a range of sophisticated techniques at their disposal to assess the condition of reinforced concrete structures that do not cause material damage and which usually enable the structure to be used while the surveys are carried out. Non-destructive evaluation of the infrastructure also plays a key role in calculating and prioritising where money should be spent on repair or replacement. Providing details of related techniques and case studies, this book offers an overview of how to plan and implement the NDT of reinforced concrete structures.
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1979 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Energy Today written by OECD Nuclear Energy Agency and published by OECD. This book was released on 2003 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: As energy demand increases in line with the expansion of the world's leading economies and the growth of developing economies, a key challenge remains of how to provide the energy levels required while protecting our environment and conserving natural resources. Nuclear energy is a complex and controversial technology but also has the potential to provide considerable benefits. This publication explores a range of issues involved in the use of nuclear energy, including safety aspects, whether its use is economically competitive, its role in meeting greenhouse gas reduction targets, how to manage the radioactive waste it generates, whether its use increase the risk of proliferation of nuclear weapons, security of resources, and its potential role in the future.
Download or read book Model Code for Service Life Design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Download or read book Concrete Repair to EN 1504 written by Michael Raupach and published by CRC Press. This book was released on 2014-05-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Construction Sector Is Increasingly Focused On RepairAs concrete structures are maintained longer for both environmental and financial reasons, the diagnosis, design, and selection of products, and repair work all depend on the individual condition of the buildings and require specialist knowledge from everyone involved. Concrete Repair to EN 1
Download or read book Concrete Radiation Shielding written by M. F. Kaplan and published by Longman Publishing Group. This book was released on 1989 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of concrete radiation shielding dealing with relevant atomic and nuclear physics, properties of radiation, materials for and properties of concrete and the design and cost of shielding together with other important aspects.
Download or read book Handling and Processing of Radioactive Waste from Nuclear Applications written by International Atomic Energy Agency and published by . This book was released on 2001 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides detailed information on the handling, processing and storage techniques most widely used and recommended for waste from non-fuel-cycle activities. The report was designed to meet the needs of developing countries by focusing on the most simple, affordable and reliable techniques and discussing their advantages and limitations.
Download or read book Materials for Civil and Construction Engineers Pearson New International Edition written by Michael S. Mamlouk and published by Pearson Higher Ed. This book was released on 2013-08-27 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Civil Engineering Materials, Construction Materials, and Construction Methods and Materials offered in Civil, Environmental, or Construction engineering departments. This introduction gives students a basic understanding of the material selection process and the behavior of materials — a fundamental requirement for all civil and construction engineers performing design, construction, and maintenance. The authors cover the various materials used by civil and construction engineers in one useful reference, limiting the vast amount of information available to the introductory level, concentrating on current practices, and extracting information that is relevant to the general education of civil and construction engineers. A large number of experiments, figures, sample problems, test methods, and homework problems gives students opportunity for practice and review.
Download or read book Corrosion of Reinforcement in Concrete Construction written by Alan P. Crane and published by Halsted Press. This book was released on 1983 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
