Download or read book Prevention of Catastrophic Failure in Pressure Vessels and Pipings written by Rauno Rintamaa and published by Nordic Council of Ministers. This book was released on 1989 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Failure Analysis and Prevention written by Aidy Ali and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancement methods used in analysing the root cause of engineering failures and the proactive suggestion for future failure prevention. The techniques used especially non-destructive testing such X-ray are well described. The failure analysis covers materials for metal and composites for various applications in mechanical, civil and electrical applications. The modes of failures that are well explained include fracture, fatigue, corrosion and high-temperature failure mechanisms. The administrative part of failures is also presented in the chapter of failure rate analysis. The book will bring you on a tour on how to apply mechanical, electrical and civil engineering fundamental concepts and to understand the prediction of root cause of failures. The topics explained comprehensively the reliable test that one should perform in order to investigate the cause of machines, component or material failures at the macroscopic and microscopic level. I hope the material is not too theoretical and you find the case study, the analysis will assist you in tackling your own failure investigation case.
Download or read book Pressure Vessels and Piping Design and Analysis Quality assurance applications components written by G. J. Bohm and published by . This book was released on 1976 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Initiating Events and Independent Protection Layers in Layer of Protection Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a guide for Layers of Protection Analysis (LOPA) practitioners. It explains the onion skin model and in particular, how it relates to the use of LOPA and the need for non-safety instrumented independent protection layers. It provides specific guidance on Independent Protection Layers (IPLs) that are not Safety Instrumented Systems (SIS). Using the LOPA methodology, companies typically take credit for risk reductions accomplished through non-SIS alternatives; i.e. administrative procedures, equipment design, etc. It addresses issues such as how to ensure the effectiveness and maintain reliability for administrative controls or “inherently safer, passive” concepts. This book will address how the fields of Human Reliability Analysis, Fault Tree Analysis, Inherent Safety, Audits and Assessments, Maintenance, and Emergency Response relate to LOPA and SIS. The book will separate IPL’s into categories such as the following: Inherent Safety eliminates a scenario or fundamentally reduces a hazard Preventive/Proactive prevents initiating event from occurring such as enhanced maintenance Preventive/Active stops chain of events after initiating event occurs but before an incident has occurred such as high level in a tank shutting off the pump. Mitigation (active or passive) minimizes impact once an incident has occurred such as closing block valves once LEL is detected in the dike (active) or the dike preventing contamination of groundwater (passive).
Download or read book Pressure Vessels Field Manual written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2012-10-10 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of the cost-savings for any oil production facility is the prevention of failure in one of the production equipment such as pressure vessels. This book provides engineers with the advanced tools to alter, repair and re-rate pressure vessels using ASME, NBIC and API 510 codes and standards.
Download or read book Fracture Mechanics Verification by Large Scale Testing EGF ESIS 8 written by K. Kussmaul and published by Wiley-Blackwell. This book was released on 1991-09-02 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a specialists' meeting organised by the IAEA and published under the auspices of EGF. Contents include - model computations and experiments on the structural integrity of components containing part-through cracks, experience in comparison of large and small fracture mechanical specimens, dynamic large scale testing with a 12 MN-high speed propellant driven tensile testing machine, crack stability in centre cracked plates subject to uniformly distributed loadings, the need for large scale testing in the UKAEA and experimental and numerical investigations of stable crack growth of an axial surface flaw in a pressure vessel.
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, the environment, and the economy of a region. The book combines introductory sections on failure analysis with numerous real world case studies of pipelines and other types of materials failure in the oil and gas industry, including joint failure, leakage in crude oil storage tanks, failure of glass fibre reinforced epoxy pipes, and failure of stainless steel components in offshore platforms, amongst others. - Introduces readers to modern analytical techniques in materials failure analysis - Combines foundational knowledge with current research on the latest developments and innovations in the field - Includes numerous compelling case studies of materials failure in oil and gas pipelines and drilling platforms
Download or read book Process Safety Calculations written by Renato Benintendi and published by Elsevier. This book was released on 2021-03-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Safety Calculations, Second Edition remains to be an essential guide for students and practitioners in process safety engineering who are working on calculating and predicting risks and consequences. The book focuses on calculation procedures based on basic chemistry, thermodynamics, fluid dynamics, conservation equations, kinetics and practical models. It provides helpful calculations to demonstrate compliance with regulations and standards, such as Seveso directive(s)/COMAH, CLP regulation, ATEX directives, PED directives, REACH regulation, OSHA/NIOSH and UK ALARP, along with risk and consequence assessment, stoichiometry, thermodynamics, stress analysis and fluid-dynamics. This fully revised, updated and expanded second edition follows the same organization as the first, including the original three main parts, Fundamentals, Consequence Assessment and Quantitative Risk Assessment. However, the latter part is significantly expanded, including an appendix consisting of five fundamental thematic areas belonging to the risk assessment framework, including in-depth calculations methodologies for some fundamental monothematic macro-areas of process safety. - Revised, updated and expanded new edition that includes newly developing areas of process safety that are relevant to QRA - Provides engineering fundamentals to enable readers to properly approach the subject of process safety - Includes a remarkable and broad numbers of calculation examples, which are completely resolved and fully explained - Develops the QRA subject, consistently with the methodology applied in the big projects
Download or read book Lees Process Safety Essentials written by Sam Mannan and published by Butterworth-Heinemann. This book was released on 2013-11-12 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lees' Process Safety Essentials is a single-volume digest presenting the critical, practical content from Lees' Loss Prevention for day-to-day use and reference. It is portable, authoritative, affordable, and accessible — ideal for those on the move, students, and individuals without access to the full three volumes of Lees'. This book provides a convenient summary of the main content of Lees', primarily drawn from the hazard identification, assessment, and control content of volumes one and two. Users can access Essentials for day-to-day reference on topics including plant location and layout; human factors and human error; fire, explosion and toxic release; engineering for sustainable development; and much more. This handy volume is a valuable reference, both for students or early-career professionals who may not need the full scope of Lees', and for more experienced professionals needing quick, convenient access to information. - Boils down the essence of Lees'—the process safety encyclopedia trusted worldwide for over 30 years - Provides safety professionals with the core information they need to understand the most common safety and loss prevention challenges - Covers the latest standards and presents information, including recent incidents such as Texas City and Buncefield
Download or read book ACMSM25 written by Chien Ming Wang and published by Springer Nature. This book was released on 2019-09-03 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The Australasian Conference on the Mechanics of Structures and Materials (ACMSM25 held in Brisbane, December 2018), celebrating the 50th anniversary of the conference. First held in Sydney in 1967, it is one of the longest running conferences of its kind, taking place every 2–3 years in Australia or New Zealand. Bringing together international experts and leaders to disseminate recent research findings in the fields of structural mechanics, civil engineering and materials, it offers a forum for participants from around the world to review, discuss and present the latest developments in the broad discipline of mechanics and materials in civil engineering.
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book Papers Presented written by and published by . This book was released on 1969 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Abstracts and Technical Reviews written by United States. National Aeronautics and Space Administration. Office of Reliability and Quality Assurance and published by . This book was released on 1969 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Acoustics written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 1998-03-09 with total page 1494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustical engineers, researchers, architects, and designers need a comprehensive, single-volume reference that provides quick and convenient access to important information, answers and questions on a broad spectrum of topics, and helps solve the toughest problems in acoustical design and engineering. The Handbook of Acoustics meets that need. It offers concise coverage of the science and engineering of acoustics and vibration. In more than 100 clearly written chapters, experts from around the world share their knowledge and expertise in topics ranging from basic aerodynamics and jet noise to acoustical signal processing, and from the interaction of fluid motion and sound to infrasound, ultrasonics, and quantum acoustics. Topics covered include: * General linear acoustics * Nonlinear acoustics and cavitation * Aeroacoustics and atmospheric sound * Mechanical vibrations and shock * Statistical methods in acoustics * Architectural acoustics * Physiological acoustics * Underwater sound * Ultrasonics, quantum acoustics, and physical aspects of sound * Noise: its effects and control * Acoustical signal processing * Psychological acoustics * Speech communication * Music and musical acoustics * Acoustical measurements and instrumentation * Transducers The Handbook of Acoustics belongs on the reference shelf of every engineer, architect, research scientist, or designer with a professional interest in the propagation, control, transmission, and effects of sound.