Download or read book Prediction of Transport and Other Physical Properties of Fluids written by S. Bretsznajder and published by Elsevier. This book was released on 2013-10-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prediction of Transport and Other Physical Properties of Fluids reviews general methods for predicting the transport and other physical properties of fluids such as gases and liquids. Topics covered range from the theory of corresponding states and methods for estimating the surface tension of liquids to some basic concepts of the kinetic theory of gases. Methods of estimating liquid viscosity based on the principle of additivity are also described. This volume is comprised of eight chapters and opens by presenting basic information on gases and liquids as well as intermolecular forces and constitutive and additive properties of chemical compounds. The reader is then introduced to practical methods for computing the values of physico-chemical quantities necessary for designing technological processe. Subsequent chapters focus on the surface tension of liquids and its dependence on molecular properties; the phenomenon of internal friction (viscosity) in fluids; graphical interpolation and extrapolation of liquid viscosity data; and the thermal conductivity of gases and liquids. The final two chapters examine diffusion in gases and liquids, with emphasis on the methods used for estimating the coefficients of diffusion. This book will be of interest to chemists and students and research workers in chemistry.

Download or read book Prediction of Transport and other physical Properties of Fluids 11 written by S. Bretsznajder and published by . This book was released on 1971 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermophysical Properties of Fluids written by Marc J. Assael and published by World Scientific. This book was released on 1996 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the prediction of thermodynamic and transport properties of gases and liquids. The prediction of such properties is essential for the solution of many problems encountered in chemical and process engineering as well as in other areas of science and technology. The book aims to present the best of those modern methods which are capable of practical application. It begins with basic scientific principles and formal results which are subsequently developed into practical methods of prediction. Numerous examples, supported by a suite of computer programmes, illustrate applications of the methods. The book is aimed primarily at the student market (for both undergraduate and taught postgraduate courses) but it will also be useful for those engaged in research and for chemical and process engineering professionals.

Download or read book Prediction of transport and other physical properties of fluids written by S. Bretsznajder and published by . This book was released on 1971 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Properties of Fluids written by Jürgen Millat and published by Cambridge University Press. This book was released on 1996-06-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most reliable methods for evaluating the transport properties of pure gases and fluid mixtures, such as viscosity, thermal conductivity and diffusion. The authors place particular emphasis on recent theoretical advances in our understanding of fluid transport properties in all the different regions of temperature and pressure. In addition to the important theoretical tools, the authors cover the different methods of data representation, and they follow this with a section that demonstrates the application of selected models in a range of circumstances. They then offer case studies of transport property analysis for real fluids, and the book concludes with a discussion of various international data banks and prediction packages. Advanced students of kinetic theory, as well as engineers and scientists involved with the design of process equipment or the interpretation of measurements of fluid transport properties, will find this book indispensable.

Download or read book Transport Properties of Fluids written by Jürgen Millat and published by Cambridge University Press. This book was released on 2005-11-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most reliable methods for evaluating the transport properties of pure gases and fluid mixtures, such as viscosity, thermal conductivity and diffusion. The authors place particular emphasis on recent theoretical advances in our understanding of fluid transport properties in all the different regions of temperature and pressure. In addition to the important theoretical tools, the authors cover the different methods of data representation, and they follow this with a section that demonstrates the application of selected models in a range of circumstances. They then offer case studies of transport property analysis for real fluids, and the book concludes with a discussion of various international data banks and prediction packages. Advanced students of kinetic theory, as well as engineers and scientists involved with the design of process equipment or the interpretation of measurements of fluid transport properties, will find this book indispensable.

Download or read book Advances in Transport Properties of Fluids written by Marc J. Assael and published by Royal Society of Chemistry. This book was released on 2014 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in the field, this book will provide a valuable, current account of the advances in the measurement and prediction of transport properties that have occurred over the last twenty years. Critical to industry, these properties are fundamental to, for example, the development of fossil fuels, carbon sequestration and alternative energy sources. This unique and comprehensive account will provide the experimental and theoretical background of near-equilibrium transport properties which provide the background when investigating industrial applications. Coverage includes new experimental techniques and how existing techniques have developed, new fluids eg molten metals, dense fluids, and critical enhancements of transport properties of pure substances. Practitioners and researchers in chemistry and engineering will benefit from this state of the art record of recent advances in the field of transport properties.

Download or read book Transport Properties of Organic Liquids written by G. Latini and published by WIT Press. This book was released on 2006 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The liquid state is possibly the most difficult and intriguing state of matter to model. Organic liquids are required, mainly as working fluids, in almost all industrial activities and in most appliances (e.g. in air conditioning). Transport properties (namely dynamic viscosity and thermal conductivity) are possibly the most important properties for the design of devices and appliances. Most theoretical studies on the liquid state date back to the Fifties however huge advances in experimental studies and applied research on heat and mass transfer in liquids have been achieved during past decades. Most of the models cannot rely on theory alone and are empirical, while for most organic liquids, only a few experimental points and empirical correlations are available in literature.The aim of this book is to present both theoretical approaches and the latest experimental advances on the issue, and to merge them into a wider approach. The book is organised into five chapters. The first chapter presents our theoretical knowledge of the liquid state. The second presents the tentative models for the evaluation of the thermal conductivity of organic liquids and confronts their results with the experimental data available in literature. The third presents the tentative models for the evaluation of the dynamic viscosity of organic liquids and confronts their results with the experimental data available in literature. The fourth presents a deeper review of the choice methods for thermal conductivity and their applications to mixtures of organic liquids and the fifth chapter presents a deeper review of the choice methods for dynamic viscosity and their applications to mixtures of organic liquids.

Download or read book Viscosity of Liquids written by Dabir S. Viswanath and published by Springer Science & Business Media. This book was released on 2007-03-31 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in that it brings together published viscosity data, experimental methods, theoretical, correlation and predictive procedures in a single volume. The readers will get a better understanding of why various methods are used for measuring viscosity of different types of liquids and why an experimental method is dependent on fluid characteristics, such as Newtonian or non-Newtonian fluids.

Download or read book Symposium on Transport Properties of Fluids Fluid Mixtures Their Measurement Estimation Correlation Use 10 11 April 1979 written by and published by . This book was released on 1979 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Computer Program for the Prediction of Viscosity and Thermal Conductivity in Hydrocarbon Mixtures written by James F. Ely and published by . This book was released on 1981 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermodynamic and Transport Properties of Coal Liquids written by Constantine Tsonopoulos and published by . This book was released on 1986-04-03 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A monograph for the student, specialist, and engineer working on coal liquefaction process development and design. Focuses on thermodynamic and transport properties needed in heat and material balances, and equipment design calculations. Presents data needs for process design, all coal liquefaction processes, and methods for characterizing coal liquids and model compounds. Discusses properties such as vapor, vapor-liquid equilibria, thermal, density, surface tension and transport properties. Includes look at future needs.

Download or read book Center for Chemical Engineering written by and published by . This book was released on 1987 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermophysical Properties of Fluids Argon ethylene parahydrogen nitrogen nitrogen trifluoride and oxygen written by Ben Younglove and published by American Institute of Physics. This book was released on 1982 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book The Properties of Gases and Liquids 5E written by Bruce E. Poling and published by McGraw Hill Professional. This book was released on 2000-11-27 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Butterworth-Heinemann. This book was released on 2007-11-26 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bottom line: For a holistic view of chemical engineering design, this book provides as much, if not more, than any other book available on the topic. --Extract from Chemical Engineering Resources review. Chemical Engineering Design is one of the best-known and widely adopted texts available for students of chemical engineering. It deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this US edition has been specifically developed for the US market. It covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, among others. Comprehensive in coverage, exhaustive in detail, it is supported by extensive problems and a separate solutions manual for adopting tutors and lecturers. In addition, the book is widely used by professions as a day-to-day reference. Provides students with a text of unmatched relevance for the Senior Design Course and Introductory Chemical Engineering Courses Teaches commercial engineering tools for simulation and costing Comprehensive coverage of unit operations, design and economics Strong emphasis on HS&E issues, codes and standards, including API, ASME and ISA design codes and ANSI standards 108 realistic commercial design projects from diverse industries