Download or read book Prediction of Blast Loading and Its Impact on Buildings written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A bomb explosion within or immediately nearby a building can cause catastrophic damage on the building's external and internal structural frames, collapsing of walls, blowing out of large expanses of windows, and shutting down of critical life-safety systems. Loss of life and injuries to occupants can result from many causes, including direct blast-effects, structural collapse, debris impact, fire, and smoke. The indirect effects can combine to inhibit or prevent timely evacuation, thereby contributing to additional casualties. In addition, major catastrophes resulting from gas-chemical explosions result in large dynamic loads, greater than the original design loads, of many structures. Due to the threat from such extreme loading conditions, efforts have been made during the past three decades to develop methods of structural analysis and design to resist blast loads. Studies were conducted on the behavior of structural concrete subjected to blast loads. These studies gradually enhanced the understanding of the role that structural details play in affecting the behavior. The response of simple RC columns subjected to constant axial loads and lateral blast loads was examined. The finite element package ANSYS was used to model RC column with different boundary conditions and using the mesh less method to reduce mesh distortions. For the response calculations, a constant axial force was first applied to the column and the equilibrium state was determined. Next, a short duration, lateral blast load was applied and the response time history was calculated. The analysis and design of structures subjected to blast loads require a detailed understanding of blast phenomena and the dynamic response of various structural elements. This gives a comprehensive overview of the effects of explosion on structures.
Download or read book Design Against Blast written by S. Syngellakis and published by WIT Press. This book was released on 2013 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terrorist attacks and other destructive incidents caused by explosives have, in recent years, prompted considerable research and development into the protection of structures against blast loads. For this objective to be achieved, experiments have been performed and theoretical studies carried out to improve our assessments of the intensity as well as the space-time distribution of the resulting blast pressure on the one hand and the consequences of an explosion to the exposed environment on the other.This book aims to enhance awareness on and understanding of these topical issues through a collection of relevant, Transactions of the Wessex Institute of Technology articles written by experts in the field. The book starts with an overview of key physics-based algorithms for blast and fragment environment characterisation, structural response analyses and structural assessments with reference to a terrorist attack in an urban environment and the management of its inherent uncertainties.A subsequent group of articles is concerned with the accurate definition of blast pressure, which is an essential prerequisite to the reliable assessment of the consequences of an explosion. Other papers are concerned with alternative methods for the determination of blast pressure, based on experimental measurements or neural networks. A final group of articles reports investigations on predicting the response of specific structural entities and their contents.The book concludes with studies on the effectiveness of steel-reinforced polymer in improving the performance of reinforced concrete columns and the failure mechanisms of seamless steel pipes used in nuclear industry.
Download or read book Blast Effects on Buildings written by Geoffrey Mays and published by Thomas Telford. This book was released on 1995 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide is aimed at all engineers and architects involved in building design, focusing on the importance of constructing buildings which minimise damage to people and property in the event of an explosion.
Download or read book Blast Effects on Buildings written by David Cormie and published by Thomas Telford Publishing. This book was released on 2009 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
Download or read book Concrete Structures Subjected to Impact and Blast Loadings and Their Combinations written by Chunwei Zhang and published by CRC Press. This book was released on 2022-05-08 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although much research focuses on investigating the responses of reinforced concrete (RC) structures under sole impact or blast loads, the responses of RC structures under a combination of impact and blast loads currently represent a gap in our knowledge. The combined actions of impact and blast loadings may be applied to RC structures during accidental or intentional collision of vessels, vehicles, etc., carrying explosive materials. A comprehensive study on the vulnerability of various structural members is carried out using finite element (FE) simulations under combination of impact and blast loads with the variations of various loading- and structural-related parameters and key parameters. This book introduces various structural analysis approaches for concrete structures when subjected to extreme loads such as impact and blast loadings. The theory of the combinations of impact and blast loads is proposed that can provide primary insights to the specific readers to develop new ideas in impact and blast engineering, including combined actions of extreme loads arising from real-world intentional or accidental events. This book will be of value to students (undergraduate or postgraduate), engineers, and researchers in structural and civil engineering, and specifically, those who are studying and investigating the performances of concrete structures under extreme loads.
Download or read book Structural Design for Dynamic Loads written by Charles Head Norris and published by . This book was released on 1959 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protecting Buildings from Bomb Damage written by Committee on Feasibility of Applying Blast-Mitigating Technologies and Design Methodologies from Military Facilities to Civilian Buildings and published by National Academies Press. This book was released on 1995-11-09 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a brief overview of worldwide terrorist activity and reviews technologies and methods for designing blast resistant buildings. These techniques, primarily developed by the military, have applicability and relevance to the design of civilian structures. The volume recommends that a program of applied research and technology transfer be undertaken to hasten the availability and utility of these techniques to the civilian building community.
Download or read book Explosive Loading of Engineering Structures written by P.S. Bulson and published by CRC Press. This book was released on 1997-07-24 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the development of research into the explosive loading of structures, mainly since the beginning of the twentieth century. Major contributions in the fields of measurement, analysis and prediction are discussed. Dynamic loading from conventional high explosives is examined, as well as the effects of liquid propellant, dust, gas, v
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Explosion Hazards and Evaluation written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.
Download or read book A Manual for the Prediction of Blast and Fragment Loadings on Structures written by W. Baker and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual was prepared to provide Architect-Engineer (AE) firms guidance for the prediction of air blast, ground shock and fragment loadings of structures as a result of accidental explosions in or near these structures. The manual is complementary to existing structural design manuals and can be used in combination with other manuals by AE firms to design new buildings which are resistant to blast and fragmentation effects of an accidental explosion. Another objective was to aid in the assessment of the explosion-resistant capabilities of existing buildings at the Pantex Plant near Amarillo, Texas. The manual is specific for new or existing facilities at the Pantex Plant. However, most data and prediction methods are presented in general terms and can be applied to other high explosive facilities if proper modifying factors are used.
Download or read book Explosive Shocks in Air written by Gilbert F. Kinney and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A purpose of science is to organize diversified factual knowledge into a coherent body of information, and to present this from the simplest possible viewpoint. This is a formidable task where our knowledge is incomplete, as it is with explosions. Here one runs the risk of oversimplification, naivete, and incom pleteness. Nevertheless a purpose of this work is to present as simply as possible a general description of the basic nature of explosions. This treatise should be of interest to all who are working with explosives such as used in construction or in demolition work, in mining operations, or in military applications. It should also be of interest to those concemed with disasters such as explosions or earthquakes, to those involved in civil defense precautions, and to those concemed with defense against terrorists. That is, this material should be of interest to all who wish to utilize, or to avoid, the effects of explosions as weil as to those whose interest is primarily scientific in nature.
Download or read book Explosion Resistant Buildings written by T. Bangash and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book highlights all aspects of the analysis and design of buildings subject to impact, explosion and fire. It is a definitive reference book and contains 10 chapters from a wide international prospective. Three-dimensional finite element and discrete element techniques are included. They are applied to buildings such as the World Trade Center (WTC Twin Towers) and the Federal Building in Oklahoma on the basis of the designers drawings, data and other information. Many small case studies are also included. The book has a comprehensive bibliography and a large appendix providing background analysis and computer subroutines of recently developed programs.
Download or read book Blast and Ballistic Loading of Structures written by John Hetherington and published by CRC Press. This book was released on 2014-04-21 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together, in a concise format, the key elements of the loads produced from explosive sources, and how they interact with structures. Explosive sources include gas, high explosives, dust and nuclear materials.It presents quantitative information and design methods in a useable form without recourse to extensive mathematical ana
Download or read book Blast Mitigation for Structures written by National Research Council and published by National Academies Press. This book was released on 2000-05-10 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Blast Mitigation for Structures Program (BMSP) is a research and development activity conducted by the Defense Threat Reduction Agency (DTRA) to improve the performance of buildings that are targets of terrorist attack. The primary goal of the BMSP is to reduce loss of life and injuries to the occupants of these buildings through the development of innovative techniques for new structures and retrofitting existing facilities. The committee's findings and recommendations are contained in this initial assessment report.
Download or read book Advances in Construction Management written by Lee Yee Loon and published by Springer Nature. This book was released on 2022-01-19 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Advances in Construction Materials and Management (ACMM 2021). It discusses the recent innovations towards construction management, building technology and new materials in practice in civil engineering. Various topics covered include architecture and urban planning, smart materials and structures, GIS in construction application, transportation materials and engineering, geotechnical applications in construction, energy and sustainability, green building technologies and materials and construction management. The book will be useful for beginners, researchers and professionals working in the area of civil engineering.
Download or read book CEB FIP Model Code 1990 written by FIB – International Federation for Structural Concrete and published by fib Fédération internationale du béton. This book was released on 1993-01-01 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design code for concrete structures is the result of a complete revision to the former Model Code 1978, which was produced jointly by CEB and FIP. The 1978 Model Code has had a considerable impact on the national design codes in many countries. In particular, it has been used extensively for the harmonisation of national design codes and as basic reference for Eurocode 2. The 1990 Model Code provides comprehensive guidance to the scientific and technical developments that have occurred over the past decade in the safety, analysis and design of concrete structures. It has already influenced the codification work that is being carried out both nationally and internationally and will continue so to do.
