Download or read book Precision Motion Control written by Kok Kiong Tan and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Precision Motion Control focuses on enabling technologies for precision engineering. It has been extensively edited and rewritten throughout with the following particular areas being expanded or added: • piezoelectric actuators • fine movement control • gantry-stage control • interpolation of quadrature encoder signals • geometrical error modeling for single-, dual- and general-XY-axis stages.
Download or read book Precision Motion Systems written by Jian Liang and published by Butterworth-Heinemann. This book was released on 2019-05-30 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Motion Systems: Modeling, Control, and Applications presents basic dynamics and the control knowledge needed for the daily challenges of researchers and professionals working in the field. The book explains accurate dynamics and control algorithms, along with experimental validation of precision systems in industrial, medical, airborne and spaceborne applications. By using the proposed experimental designs, readers will be able to make further developments and validations. Presents accurate dynamics and control algorithms in industrial, medical, airborne and spaceborne applications Explains basic dynamics and control knowledge, such as Laplace transformations and stability analysis Teaches how to design, develop and control typical precision systems
Download or read book High Speed Precision Motion Control written by Takashi Yamaguchi and published by CRC Press. This book was released on 2017-07-12 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by Takashi Yamaguchi, Mitsuo Hirate, and Chee Khiang Pang, with contributions from pioneers known for their ground-breaking work, High-Speed Precision Motion Control discusses high-precision and fast servo controls in hard disk drives (HDDs). The chapter authors describe the control technologies they’ve developed, most of which have already been successfully applied to mass production of HDDs. As the proposed methodologies have been verified on commercial HDDs at the very least, these advanced control technologies can also be readily applied to precision motion control of other mechatronic systems, e.g., scanners, micro-positioners, photocopiers, atomic force microscopes (AFMs), etc. Each self-contained chapter progresses from concept to technique and presents application examples in automotive, aerospace, aeronautical, and manufacturing engineering. The control technologies are categorized into high-speed servo control, precision control, and environment-friendly control, making it easy to find an appropriate control technology according to their domain of application. The book also makes MATLAB®/SIMULINK® codes for benchmark problems available for download. The control technologies described range from fundamental classical control theories to advanced topics such as multi-rate control. The content contains a healthy balance between materials from the contributor’s research works and that in the wider literature. The resulting resource empowers engineers and managers with the knowledge and know-how to make important decisions and policies.
Download or read book Motion Control Systems written by Asif Sabanovic and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion Control Systems is concerned with design methods that support the never-ending requirements for faster and more accurate control of mechanical motion. The book presents material that is fundamental, yet at the same time discusses the solution of complex problems in motion control systems. Methods presented in the book are based on the authors' original research results. Mathematical complexities are kept to a required minimum so that practicing engineers as well as students with a limited background in control may use the book. It is unique in presenting know-how accumulated through work on very diverse problems into a comprehensive unified approach suitable for application in high demanding, high-tech products. Major issues covered include motion control ranging from simple trajectory tracking and force control, to topics related to haptics, bilateral control with and without delay in measurement and control channels, as well as control of nonredundant and redundant multibody systems. Provides a consistent unified theoretical framework for motion control design Offers graduated increase in complexity and reinforcement throughout the book Gives detailed explanation of underlying similarities and specifics in motion control Unified treatment of single degree-of-freedom and multibody systems Explains the fundamentals through implementation examples Based on classroom-tested materials and the authors' original research work Written by the leading researchers in sliding mode control (SMC) and disturbance observer (DOB) Accompanying lecture notes for instructors Simulink and MATLAB® codes available for readers to download Motion Control Systemsis an ideal textbook for a course on motion control or as a reference for post-graduates and researchers in robotics and mechatronics. Researchers and practicing engineers will also find the techniques helpful in designing mechanical motion systems.
Download or read book Precision Motion Control written by Kok K. Tan and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision manufacturing is a development that has been gathering momentum over the last century and accelerating over the last 25 years in terms of research, development, and application to product innovation. The driving force in this development arises from requirements for much higher performance of products, higher reliability, longer life, lower cost, and miniaturization. This development is widely known as precision engineering and, today, it is generally defined as manufacturing to tolerances which are better than one part in 105. Applications are abound and can be found in various semiconductor processes (e.g., lithography, wafer probing, inspection), Coordinate Measuring Machines (CMMs) and precision metrology systems (e.g., Scanning Probe Microscopy (SPM)), and robot/machine tools to carry out micro-assembly (e.g., MEMS) and delicate short wavelength laser processes. As an enabling technology for precision engineering, precision instrumentation and measurement, geometrical calibration and compensation, and motion control are directly important issues to be addressed in the overall system design and realization. This book is focused on these aspects of precision engineering. It is a compilation of the major results and publications from a major project which develop a state-of-the-art high-speed, ultra-precision robotic system. A comprehensive and thorough treatment of the subject matter is provided in a manner that is amenable to a broad base of readers, ranging from the academics to the practitioners, by providing detailed experimental verifications of the developed materials.
Download or read book Advanced Optimization for Motion Control Systems written by Jun Ma and published by CRC Press. This book was released on 2020-01-24 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision motion control is strongly required in many fields, such as precision engineering, micromanufacturing, biotechnology, and nanotechnology. Although great achievements have been made in control engineering, it is still challenging to fulfill the desired performance for precision motion control systems. Substantial works have been presented to reveal an increasing trend to apply optimization approaches in precision engineering to obtain the control system parameters. In this book, we present a result of several years of work in the area of advanced optimization for motion control systems. The book is organized into two parts: Part I focuses on the model-based approaches, and Part II presents the data-based approaches. To illustrate the practical appeal of the proposed optimization techniques, theoretical results are verified with practical examples in each chapter. Industrial problems explored in the book are formulated systematically with necessary analysis of the control system synthesis. By virtue of the design and implementation nature, this book can be used as a reference for engineers, researchers, and students who want to utilize control theories to solve the practical control problems. As the methodologies have extensive applicability in many control engineering problems, the research results in the field of optimization can be applied to full-fledged industrial processes, filling in the gap between research and application to achieve a technology frontier increment.
Download or read book The Design of High Performance Mechatronics 2nd Revised Edition written by R. Munnig Schmidt and published by IOS Press. This book was released on 2014-01-08 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book Precision Sensors Actuators and Systems written by Hornsen Tzou and published by Springer Science & Business Media. This book was released on 1992-11-30 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into and development of high-precision systems, microelectromechanical systems, distributed sensors/actuators, smart structural systems, high-precision controls, etc. have drawn much attention in recent years. These new devices and systems will bring about a new technical revolution in modern industries and impact future human life. This book presents a unique overview of these technologies such as silicon based sensors/actuators and control piezoelectric micro sensors/actuators, micro actuation and control, micro sensor applications in robot control, optical fiber sensors/systems, etc. These are four essential subjects emphasized in the book: 1. Survey of the (current) research and development; 2. Fundamental theories and tools; 3. Practical applications. 4. Outlining future research and development.
Download or read book Industrial Motion Control written by Dr. Hakan Gurocak and published by John Wiley & Sons. This book was released on 2015-10-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion control is widely used in all types of industries including packaging, assembly, textile, paper, printing, food processing, wood products, machinery, electronics and semiconductor manufacturing. Industrial motion control applications use specialized equipment and require system design and integration. To design such systems, engineers need to be familiar with industrial motion control products; be able to bring together control theory, kinematics, dynamics, electronics, simulation, programming and machine design; apply interdisciplinary knowledge; and deal with practical application issues. The book is intended to be an introduction to the topic for senior level undergraduate mechanical and electrical engineering students. It should also be resource for system design engineers, mechanical engineers, electrical engineers, project managers, industrial engineers, manufacturing engineers, product managers, field engineers, and programmers in industry.
Download or read book Design Modeling and Control of Nanopositioning Systems written by Andrew J. Fleming and published by Springer. This book was released on 2014-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (including an appreciation of iterative learning control). Performance issues are given importance as are problems limiting that performance such as hysteresis and noise which arise in the treatment of control and are then given chapter-length attention in their own right. The reader also learns about cost functions and other issues involved in command shaping, charge drives and electrical considerations. All concepts are demonstrated experimentally including by direct application to atomic force microscope imaging. Design, Modeling and Control of Nanopositioning Systems will be of interest to researchers in mechatronics generally and in control applied to atomic force microscopy and other nanopositioning applications. Microscope developers and mechanical designers of nanopositioning devices will find the text essential reading.
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Download or read book Electromechanical Motion Systems written by Frederick G. Moritz and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory reference covering the devices, simulations and limitations in the control of servo systems Linking theoretical material with real-world applications, this book provides a valuable introduction to motion system design. The book begins with an overview of classic theory, its advantages and limitations, before showing how classic limitations can be overcome with complete system simulation. The ability to efficiently vary system parameters (such as inertia, friction, dead-band, damping), and quickly determine their effect on performance, stability, efficiency, is also described. The author presents a detailed review of major component characteristics and limitations as they relate to system design and simulation. The use of computer simulation throughout the book will familiarize the reader as to how this contributes to efficient system design, how it avoids potential design flaws and saves both time and expense throughout the design process. The comprehensive coverage of topics makes the book ideal for professionals who need to apply theory to real-world situations, as well as students who wish to enhance their understanding of the topic. • Covers both theory and practical information at an introductory level, allowing readers to advance to further topics having obtained a strong grounding in the subject • Provides a connection between classic servo technology and the evolution of computer control and simulation • VisSim demonstration material available on an accompanying website enabling readers to experiment with system examples
Download or read book The Design of High Performance Mechatronics written by R. Munnig Schmidt and published by IOS Press. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives.This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS.As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems.Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems.Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems.Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book Creating Precision Robots written by Francis Nickols and published by Butterworth-Heinemann. This book was released on 2018-08-12 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creating Precision Robots: A Project-Based Approach to the Study of Mechatronics and Robotics shows how to use a new "Cardboard Engineering technique for the handmade construction of three precision microcomputer controlled robots that hit, throw and shoot. Throughout the book, the authors ensure that mathematical concepts and physical principles are not only rigorously described, but also go hand-in-hand with the design and constructional techniques of the working robot. Detailed theory, building plans and instructions, electric circuits and software algorithms are also included, along with the importance of tolerancing and the correct use of numbers in programming. The book is designed for students and educators who need a detailed description, mathematical analysis, design solutions, engineering drawings, electric circuits and software coding for the design and construction of real bench-top working robots. - Provides detailed instructions for the building and construction of specialized robots using line drawings - Teaches students how to make real working robots with direct meaning in the engineering academic world - Describes and explains the math and physics theory related to hitting, throwing and shooting robots
Download or read book Machine Learning Based Fault Diagnosis for Industrial Engineering Systems written by Rui Yang and published by CRC Press. This book was released on 2022-06-16 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides advanced techniques for precision compensation and fault diagnosis of precision motion systems and rotating machinery. Techniques and applications through experiments and case studies for intelligent precision compensation and fault diagnosis are offered along with the introduction of machine learning and deep learning methods. Machine Learning-Based Fault Diagnosis for Industrial Engineering Systems discusses how to formulate and solve precision compensation and fault diagnosis problems. The book includes experimental results on hardware equipment used as practical examples throughout the book. Machine learning and deep learning methods used in intelligent precision compensation and intelligent fault diagnosis are introduced. Applications to deal with relevant problems concerning CNC machining and rotating machinery in industrial engineering systems are provided in detail along with applications used in precision motion systems. Methods, applications, and concepts offered in this book can help all professional engineers and students across many areas of engineering and operations management that are involved in any part of Industry 4.0 transformation.
Download or read book Precision Spindle Metrology written by Eric R. Marsh and published by DEStech Publications, Inc. This book was released on 2010 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precision Nanometrology written by Wei Gao and published by Springer Science & Business Media. This book was released on 2010-06-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Nanometrology describes the new field of precision nanometrology, which plays an important part in nanoscale manufacturing of semiconductors, optical elements, precision parts and similar items. It pays particular attention to the measurement of surface forms of precision workpieces and to stage motions of precision machines. The first half of the book is dedicated to the description of optical sensors for the measurement of angle and displacement, which are fundamental quantities for precision nanometrology. The second half presents a number of scanning-type measuring systems for surface forms and stage motions. The systems discussed include: • error separation algorithms and systems for measurement of straightness and roundness, • the measurement of micro-aspherics, • systems based on scanning probe microscopy, and • scanning image-sensor systems. Precision Nanometrology presents the fundamental and practical technologies of precision nanometrology with a helpful selection of algorithms, instruments and experimental data. It will be beneficial for researchers, engineers and postgraduate students involved in precision engineering, nanotechnology and manufacturing.