Download or read book Shape Memory and Superelastic Alloys written by K Yamauchi and published by Elsevier. This book was released on 2011-04-30 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory and superelastic alloys possess properties not present in ordinary metals meaning that they can be used for a variety of applications. Shape memory and superelastic alloys: Applications and technologies explores these applications discussing their key features and commercial performance. Readers will gain invaluable information and insight into the current and potential future applications of shape memory alloys.Part one covers the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics of Ti-Ni-based and Ti-Nb-based shape memory and superelastic (SM/SE) alloys, the development and commercialisation of TiNi and Cu-based alloys, industrial processing and device elements, design of SMA coil springs for actuators before a final overview on the development of SM and SE applications. Part two introduces SMA application technologies with chapters investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering before looking at the properties, processing and applications of Ferrous (Fe)-based SMAs. Part three focuses on the applications of superelastic alloys and explores their functions in the medical, telecommunications, clothing, sports and leisure industries. The appendix briefly describes the history and activity of the Association of Shape Memory Alloys (ASMA).With its distinguished editors and team of expert contributors, Shape memory and superelastic alloys: Applications and technologies is be a valuable reference tool for metallurgists as well as for designers, engineers and students involved in one of the many industries in which shape memory effect and superelasticity are used such as construction, automotive, medical, aerospace, telecommunications, water/heating, clothing, sports and leisure. - Explores important applications of shape memory and superelastic alloys discussing their key features and commercial performance - Assesses the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics - Introduces SMA application technologies investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering

Download or read book Physics of Laser Materials Processing written by Gennady G. Gladush and published by Springer Science & Business Media. This book was released on 2011-08-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic mechanisms, theory, simulations and technological aspects of Laser processing techniques. It covers the principles of laser quenching, welding, cutting, alloying, selective sintering, ablation, etc. The main attention is paid to the quantitative description. The diversity and complexity of technological and physical processes is discussed using a unitary approach. The book aims on understanding the cause-and-effect relations in physical processes in Laser technologies. It will help researchers and engineers to improve the existing and develop new Laser machining techniques. The book addresses readers with a certain background in general physics and mathematical analysis: graduate students, researchers and engineers practicing laser applications.

Download or read book Shape Memory Alloy Actuators written by Mohammad H. Elahinia and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic approach to realizing NiTi shape memory alloy actuation, and is aimed at science and engineering students who would like to develop a better understanding of the behaviors of SMAs, and learn to design, simulate, control, and fabricate these actuators in a systematic approach. Several innovative biomedical applications of SMAs are discussed. These include orthopedic, rehabilitation, assistive, cardiovascular, and surgery devices and tools. To this end unique actuation mechanisms are discussed. These include antagonistic bi-stable shape memory-superelastic actuation, shape memory spring actuation, and multi axial tension-torsion actuation. These actuation mechanisms open new possibilities for creating adaptive structures and biomedical devices by using SMAs.

Download or read book Technical Economic and Societal Effects of Manufacturing 4 0 written by Mikael Collan and published by Palgrave Macmillan. This book was released on 2020-10-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.

Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)

Download or read book Shape Memory Alloys for Biomedical Applications written by T Yoneyama and published by Elsevier. This book was released on 2008-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys are suitable for a wide range of biomedical applications, such as dentistry, bone repair and cardiovascular stents. Shape memory alloys for biomedical applications provides a comprehensive review of the use of shape memory alloys in these and other areas of medicine.Part one discusses fundamental issues with chapters on such topics as mechanical properties, fabrication of materials, the shape memory effect, superelasticity, surface modification and biocompatibility. Part two covers applications of shape memory alloys in areas such as stents and orthodontic devices as well as other applications in the medical and dental fields.With its distinguished editors and international team of contributors, Shape memory alloys for biomedical applications is an essential reference for materials scientists and engineers working in the medical devices industry and in academia. - A comprehensive review of shape memory metals and devices for medical applications - Discusses materials, mechanical properties, surface modification and biocompatibility - Chapters review medical and dental devices using shape memory metals, including stents and orthodontic devices

Download or read book Pseudoelasticity of Shape Memory Alloys written by Andrzej Ziolkowski and published by Butterworth-Heinemann. This book was released on 2015-03-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pseudoelasticity of Shape Memory Alloys: Theory and Experimental Studies is devoted to the phenomenon of pseudoelasticity (superelasticity) exhibited by shape memory alloy materials. It provides extensive introductory content on the state-of-the-art in the field, including SMA materials development, definition of shape memory effects, and discussions on where shape memory behavior is found in various engineering application areas. The book features a survey of modeling approaches targeted at reliable prediction of SMA materials' behavior on different scales of observation, including atomistic, microscopic, mezoscopic, and macroscopic. Researchers and graduate students will find detailed information on the modern methodologies used in the process of building constitutive models of advanced materials exhibiting complex behavior. - Introduces the phenomenon of pseudoelasticity exhibited by shape memory alloy materials - Features a survey of modeling approaches targeted at reliable prediction of SMN materials' behavior on different scales of observation - Provides extensive coverage of the state-of-the-art in the field - Ideal reference for researchers and graduate students interested in the modern methodologies used in the process of building constitutive models of advanced materials

Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. - Provides a comprehensive one-volume overview of advances in laser additive manufacturing - Presents detailed coverage of the latest techniques used for laser additive manufacturing - Reviews both established and emerging areas of application

Download or read book Recent Trends in Manufacturing and Materials Towards Industry 4 0 written by Muhammed Nafis Osman Zahid and published by Springer Nature. This book was released on 2021-03-22 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents part of the proceedings of the Manufacturing and Materials track of the iM3F 2020 conference held in Malaysia. This collection of articles deliberates on the key challenges and trends related to manufacturing as well as materials engineering and technology in setting the stage for the world in embracing the fourth industrial revolution. It presents recent findings with regards to manufacturing and materials that are pertinent towards the realizations and ultimately the embodiment of Industry 4.0, with contributions from both industry and academia.

Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.

Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.

Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models