Download or read book Practical Safety and Reliability Assessment written by K.C. Hignett and published by Routledge. This book was released on 2002-11-01 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integral part of any engineering or manufacturing process is a continuous process of assessing its safety and reliability. This work provides a guide to the practical application of safety and reliability principles wherever risk is a consideration. The theory and mathematics are kept to a minimum, whilst a practical working model of the technology is presented for everyone involved in general engineering disciplines. It reduces the high cost of using professional consultant practitioners, introduces an advanced methodology of common mode failure analysis and modelling, with potential savings on system capital costs, and provides an illustration of working principles by graded tutorial projects.

Download or read book A Guide To Practical Human Reliability Assessment written by B. Kirwan and published by CRC Press. This book was released on 2017-12-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error is here to stay. This perhaps obvious statement has a profound implication for society when faced with the types of hazardous system accidents that have occurred over the past three decades. Such accidents have been strongly influenced by human error, yet many system designs in existence or being planned and built do not take human error into consideration.; "A Guide to Practical Human Reliability Assessment" is a practical and pragmatic guide to the techniques and approaches of human reliability assessment HRA. lt offers the reader explanatory and practical methods which have been applied and have worked in high technology and high risk assessments - particularly but not exclusively to potentially hazardous industries such as exist in process control, nuclear power, chemical and petrochemical industries. A Guide to Practical Human Reliability Assessment offers the practitioner a comprehensive tool-kit of different approaches along with guidance on selecting different methods for different applications. It covers the risk assessment and the HRA process, as well as methods of task analysis, error identification, quantification, representation of errors in the risk analysis, followed by error reduction analysis, quality assurance and documentation. There are also a number of detailed case studies from nuclear, chemical, offshore, and marine HRA'S, exemplfying the image of techniques and the impact of HRA in existing and design-stage systems.

Download or read book Practical Safety and Reliability Assessment written by K.C. Hignett and published by Routledge. This book was released on 2002-11 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integral part of any engineering or manufacturing process is a continuous process of assessing its safety and reliability. This work provides a guide to the practical application of safety and reliability principles wherever risk is a consideration. The theory and mathematics are kept to a minimum, whilst a practical working model of the technology is presented for everyone involved in general engineering disciplines. It reduces the high cost of using professional consultant practitioners, introduces an advanced methodology of common mode failure analysis and modelling, with potential savings on system capital costs, and provides an illustration of working principles by graded tutorial projects.

Download or read book Reliability of Safety Critical Systems written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.

Download or read book Practical Industrial Safety Risk Assessment and Shutdown Systems written by Dave Macdonald and published by Elsevier. This book was released on 2003-11-25 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant. This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments. * Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability * Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments * Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering

Download or read book System Safety Engineering and Risk Assessment written by Nicholas J. Bahr and published by CRC Press. This book was released on 2014-12-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: We all know that safety should be an integral part of the systems that we build and operate. The public demands that they are protected from accidents, yet industry and government do not always know how to reach this common goal. This book gives engineers and managers working in companies and governments around the world a pragmatic and reasonable approach to system safety and risk assessment techniques. It explains in easy-to-understand language how to design workable safety management systems and implement tested solutions immediately. The book is intended for working engineers who know that they need to build safe systems, but aren’t sure where to start. To make it easy to get started quickly, it includes numerous real-life engineering examples. The book’s many practical tips and best practices explain not only how to prevent accidents, but also how to build safety into systems at a sensible price. The book also includes numerous case studies from real disasters that describe what went wrong and the lessons learned. See What’s New in the Second Edition: New chapter on developing government safety oversight programs and regulations, including designing and setting up a new safety regulatory body, developing safety regulatory oversight functions and governance, developing safety regulations, and how to avoid common mistakes in government oversight Significantly expanded chapter on safety management systems, with many practical applications from around the world and information about designing and building robust safety management systems, auditing them, gaining internal support, and creating a safety culture New and expanded case studies and "Notes from Nick’s Files" (examples of practical applications from the author’s extensive experience) Increased international focus on world-leading practices from multiple industries with practical examples, common mistakes to avoid, and new thinking about how to build sustainable safety management systems New material on safety culture, developing leading safety performance indicators, safety maturity model, auditing safety management systems, and setting up a safety knowledge management system

Download or read book Reliability and Safety Engineering written by Ajit Kumar Verma and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz., • electronics engineering, • software engineering, • mechanical engineering, • structural engineering, and • power systems engineering. They describe the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Case studies from typical nuclear power plants, as well as from structural, software, and electronic systems are also discussed. Reliability and Safety Engineering combines discussions of the existing literature on basic concepts and applications with state-of-the-art methods used in reliability and risk assessment of engineering systems. It is designed to assist practicing engineers, students and researchers in the areas of reliability engineering and risk analysis.

Download or read book Safety and performance concept Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Download or read book Reliability Maintainability and Risk written by David J. Smith and published by Elsevier. This book was released on 2011-06-29 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability, Maintainability and Risk: Practical Methods for Engineers, Eighth Edition, discusses tools and techniques for reliable and safe engineering, and for optimizing maintenance strategies. It emphasizes the importance of using reliability techniques to identify and eliminate potential failures early in the design cycle. The focus is on techniques known as RAMS (reliability, availability, maintainability, and safety-integrity). The book is organized into five parts. Part 1 on reliability parameters and costs traces the history of reliability and safety technology and presents a cost-effective approach to quality, reliability, and safety. Part 2 deals with the interpretation of failure rates, while Part 3 focuses on the prediction of reliability and risk. Part 4 discusses design and assurance techniques; review and testing techniques; reliability growth modeling; field data collection and feedback; predicting and demonstrating repair times; quantified reliability maintenance; and systematic failures. Part 5 deals with legal, management and safety issues, such as project management, product liability, and safety legislation. 8th edition of this core reference for engineers who deal with the design or operation of any safety critical systems, processes or operations Answers the question: how can a defect that costs less than $1000 dollars to identify at the process design stage be prevented from escalating to a $100,000 field defect, or a $1m+ catastrophe Revised throughout, with new examples, and standards, including must have material on the new edition of global functional safety standard IEC 61508, which launches in 2010

Download or read book Apply Safety Risk and Reliability Analysis of Marine System written by Dr. Oladokun S. Olanrewaju and published by Xlibris Corporation. This book was released on 2013-10-17 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary time has seen alarming environmental revolt that is calls for attention and concern about the biosphere world, a condition that calls for need to use advantage of human improved knowledge and civilization in science engineering to develop proactive, efficient and predictive based system that meet reliability and sustainability requirement as well to reduce uncertainty components of system design. Proactive based philosophy under safety and environmental framework should be exercise on all level of system life cycle, including design, construction, operation and disposal. Selection of all element of the life cycle should be responsibly done and pollution impact of the system to the environment and community should be mitigated. The book present application of risk and reliability analysis to various cases of marine system and subsystem, application of risk method ranging from qualitative, quantitative to simulation and analytical approach is presented.

Download or read book A Guide to Practical Human Reliability Assessment written by Barry Kirwan and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Human Factors and Reliability Engineering for Safety and Security in Critical Infrastructures written by Fabio De Felice and published by Springer. This book was released on 2017-09-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects a high-quality selection of contemporary research and case studies on the complexity resulting from human/reliability management in industrial plants and critical infrastructures. It includes: Human-error management issues—considering how to reduce human errors as much as possible. Reliability management issues—considering the ability of a system or component to function under certain conditions for a specified period of time. Thus, the book analyses globally the problem regarding the human and reliability management to reduce human errors as much as possible and to ensure safety and security in critical infrastructures. Accidents continue to be the major concern in “critical infrastructures”, and human factors have been proved to be the prime causes to accidents. Clearly, human dynamics are a challenging management function to guarantee reliability, safety and costs reduction in critical infrastructures. The book is enriched by figures, examples and extensive case studies and is a valuable reference resource for those with involved in disaster and emergency planning as well as researchers interested both in theoretical and practical aspects.

Download or read book Human Reliability Analysis in Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1995 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a practical approach for incorporating human reliability analysis (HRA) into probabilistic safety assessment (PSA). This document describes the steps needed and the documentation that should be provided both to support the PSA itself and to ensure effective communication of important information arising from the studies.

Download or read book Human Reliability and Safety Analysis Data Handbook written by David I. Gertman and published by John Wiley & Sons. This book was released on 1993-12-16 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes into account the human element as well as the classical aspects of mechanical, electrical and chemical designs that contribute to risk. Features a significant amount of data essential for risk analysis not normally available. Contains numerous examples of authentic applications and case studies.

Download or read book Human Factors in Nuclear Safety written by Neville A. Stanton and published by CRC Press. This book was released on 1996-04-12 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing recognition amongst those involved with the creation and distribution of nuclear power of the value and positive impact of ergonomics, recognition heightened by the realization that safety incidents are rarely the result of purely technical failure. This work provides insights into plant design, performance shaping factors,

Download or read book High Reliability Operations written by Babcock & Wilcox Technical Services Pantex and published by United States Department of Energy. This book was released on 2008 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability and Risk Assessment written by John D. Andrews and published by Amer Society of Mechanical. This book was released on 2002-01-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematician Andrews and consulting engineer Moss explain reliability and risk analysis techniques for use in assessing the safety in modern process plants and their protective systems. The main probabilistic methods are described, particularly fault tree analysis, failure mode and effect analysis,