Download or read book Practical Problems in Mechanical Drawing and Blue Print Reading Classic Reprint written by Walter W. Sturtevant and published by Forgotten Books. This book was released on 2016-11-05 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Practical Problems in Mechanical Drawing and Blue-Print Reading Much criticism has been directed at the copy method of teaching Mechanical Drawing and undoubtedly some pupils have copied drawings which they did not clearly understand. The attempt, however, to make a problem of every drawing has been' responsible for much poor teaching. Many boys have gained the impression that a third view was always necessary, when as a matter of fact, two views of an object gave all of the information necessary and the drawing of the third view was.a waste of time. Similarly if dotted lines on a view give the pupil a clear idea of an object, the drawing 'of a section is poor practice. It is suggested that the test drawing, the side view or section or sketch be made on a sep arate sheet in pencil, thus saving time and avoiding the possibility of the pupils receiving the impression that it must be made to complete the drawing. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Practical Problems in Mechanical Drawing and Blue print Reading written by Walter Wells Sturtevant and published by . This book was released on 1921 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Problems in Mechanical Drawing and Blueprint Reading written by Walter W [From Old Catalog] Sturtevant and published by Palala Press. This book was released on 2015-12-14 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Practical Problems in Mechanical Drawing and Blue print Reading written by Walter Wells Sturtevant and published by . This book was released on 1921 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supplementary Problems for Mechanical Drawing and Blue Print Reading written by John F. Faber and published by . This book was released on 1927 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blueprint Reading A Practical Manual Of Instruction In Blueprint Reading Through The Analysis Of Typical Plates With Reference To Mechanical Drawing Conventions And Methods The Laws Of Projection Etc written by Howard Parker 1858- Fairfield and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical manual provides a step-by-step guide to reading blueprints and technical drawings. Through the analysis of typical plates, the author provides readers with a clear understanding of mechanical drawing conventions and methods, and the laws of projection. This book is an essential resource for anyone working in construction, engineering, or manufacturing, as well as students studying these fields. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Blue Print Reading written by Edwin Mather Wyatt and published by Forgotten Books. This book was released on 2017-10-16 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Blue Print Reading: Interpreting Working Drawings It has been designed to suit as wide a range of trades as possible. Usually each new principle is illustrated by both a machine and an architectural example. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Mechanical Drawing Problems for High Schools Normal Schools and Vocational Schools Classic Reprint written by Edward Berg and published by Forgotten Books. This book was released on 2016-09-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Mechanical Drawing Problems for High Schools, Normal Schools and Vocational Schools The aim of the authors is to present to the student and the teacher a collection of progressive problems embodying the fundamental principles and examples of practical mechanical drawing, arranged to cover two years of school work. The problems are grouped into first semester, second semester, and third and fourth semester work, and arranged with the view in mind of teaching the proper amount of principles and application during a given period of time. With this plan it is felt that the student who leaves school at any time during the first two years or at the end of two years, will have received the proportional amount of mechanical drawing which will serve his needs best in the practical walks of life. Each problem is given in the form of a specification sheet and a lay-out sheet from which the student is to make the completed drawing. The specification sheet gives a statement of the problem and is frequently supplemented with text matter which bears upon and emphasizes the thing to be taught in the problem, or gives some relative information. The lay-out sheet suggests the method of procedure, and also furnishes an Object lesson in the form of carefully executed work which is always before the pupil. With this method, class instruction is reduced to a mini mum, giving the teacher more time 'for individual instruction, and the pupil the Opportunity of working things out by himself. The proper use of the specification, lay-out, and reference sheets will do much, it is believed, towards creating self-reliance and personal effort and exertion on the part of the student. The required problems are fully supplemented, making the course flexible, and suitable for many needs. The reference sheets are made use of thruout the book, and will be found a valu able feature. The extra plates may be used to extend the work over a period of more than two years. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Blueprint Reading Basics written by Warren Hammer and published by Industrial Press Inc.. This book was released on 2001 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A best selling text and self-training manual.
Download or read book Blueprint Reading written by Howard Parker Fairfield and published by . This book was released on 1925 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Problems in Mechanical Drawing Classic Reprint written by Charles Alpheus Bennett and published by Forgotten Books. This book was released on 2016-11-02 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Problems in Mechanical Drawing This book is a collection of problems for the use of students beginning the subject of mechanical drawing. Each problem is stated but its solution is not given, except in a few cases where experience in teaching has shown that the solution is needed by the student. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Blueprint Reading for the Machine Trades written by Russ Schultz and published by Pearson. This book was released on 2021-03-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Drawing Problems Classic Reprint written by Charles William Weick and published by . This book was released on 2015-07-06 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Mechanical Drawing Problems This volume is a book of examples and problems for the study of mechanical drawing. It is intended to be used under the direction of a teacher, although the ambitious and painstaking student can solve many of the problems without such aid. It aims to provide a large selection of typical drawings carefully worked out as examples, each one of which is accompanied by appropriate problems suitable for elementary and advanced work in mechanical drawing. Explanations and directions are, when needed, expressed in simple and direct language, and in the fewest possible words. The principles of the construction of a drawing are shown in the examples in the graphic language of the draftsman. The book is divided into three parts. The First Part gives in brief outline such matter as the student will need to know before beginning work. It contains, also, a limited number of geometrical constructions which will be found helpful in solving some of the problems given. The Second Part - the practical work - is divided into four sections, namely: Projections, Developments and Intersections, Isometric Drawings, and Machine Details. Nearly all the example-drawings are fully dimensioned and, where necessary, described by explanatory notes. They are not to be copied but are intended to serve as a guide to the student when making his own drawings for which directions are given in the form of problems. In each section there are many more problems than any one student can work in the amount of time which is usually allotted to the subject of mechanical drawing, and a judicious selection must necessarily be made by the teacher to meet the individual students requirement. These problems are arranged in the order of their difficulty. The problems given in the beginning of each section are not too difficult for a beginner in mechanical drawing, while those toward the end of the sections will be found suitable for advanced students. Each section begins with problems that are suitable for Junior High Schools, High Schools, and Evening Schools, and advances gradually to problems that are more difficult of solution, suitable for Vocational Schools, Trade Schools, and Colleges. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Blueprint reading and Mechanical Drawing written by Howard Parker Fairfield and published by . This book was released on 1925 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blue Print Reading Interpreting Working Drawings written by Edwin Mather Wyatt and published by Envins Press. This book was released on 2007-10 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of several years teaching of blueprint reading in night schools and several years teaching of drafting preceding used for three years in blueprint and mimeographed tried out. In it. The material was form. In this form it was thoroughly preparing it for book form the drawings have been carefully redrawn and the text improved upon as ex- perience suggested to be desirable. Essentially it is, however, a tried text, one that has been used to teach the reading of drawings to one class of mixed trades, one class of ship carpenters, two classes of house car- penters, and one class of machinists. It has been designed to suit as wide a range of trades as possible. Usually each new principle is illustrated by example. both a machine and an architectural In recognition of the principle that we learn by doing a number of drawings are included to give practise in reading. At the end of each chapter a number of questions are placed, a few for the purpose of re- view, but more to stimulate the study of the drawings. The study of mechanical drawing has long been recognized as a sure method of learning to read draw- ings. The Author knows it to be effective but round about, long and tedious. The Author finds shop sketching just as effective and much quicker. It is essential that students have some method of expression of the principles discussed in the text and shop sketching provides this admirably. When time permits the book can well be supplemented with the study of many blueprints supplied by the teacher or the students and much more sketching than called for herein can also be effectively required. The Author believes the book to be well suited to individual study aside from its use as a class text. When so used he urges that the shop sketching be not neglected, and that the student seek criticism of his drawings by some draftsman. Most of the drawings used herein have been de- signed especially to illustrate the text. The drawings For 8 Bench Grinder, however, are taken from the excellent little books First Year Lathe Work and How to Run a Lathe published by the South Bend Lathe Works. The Author gratefully acknowledges the courteous privilege granted him to use them in this work. THE AUTHOR. TABLE OF CONTENTS Page Preface 3 I Introduction 7 II Kinds of Drawings III The Theory of Orthographic Projection IV Meaning of Various Kinds of Lines 17 V Foreshortened Lines, Inclined Surfaces, Auxiliary Projection. . 9 12 22 VI Scale Drawing, Dimensions 27 VII Breaks, Representing Drawings as Broken 35 VIII Sections 38 IX Bolts, Screw Threads, Machining or Finish 43 X Rivets Structural Steel 46 XI Architectural Conventions 49 XII Study of a Set of House Plans 55 XIII Study of the Bench Grinder 71 Mechanical drawing is a universal language under- stood by the artisans of all nations. The drawings made by a skillful French draftsman are just INTRODUCTION as read- able to an American draftsman as those made by his fellow draftsmen though he may know no tongue but his native one. It is a language with rules of gram- mar just as any other language, and a draftsman is a good or poor draftsman very largely or violates these rules. as he observes It is a valuable business asset to many of us to be able to understand and speak French, Spanish or some other language than our own. It may be of no value to us to be fluent writers or speakers in the tongue. Just so, a great many men in this great industrial age are finding it necessary to understand the great uni- versal language of mechanical drawing...
Download or read book Mechanical Drawing written by Charles William Maccord and published by Forgotten Books. This book was released on 2018-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Mechanical Drawing: Progressive Exercises and Practical Hints IT is proper to state that the second part of this book was separately published some time before the first part was written which accounts for the fact that the chapter on Draw ing Instruments is found at the end, and not at the beginning, where it might naturally be looked for. The exercises contained in Part I embrace the essential features of a course of instruction which has been successfully pursued for twenty years. Those given in the first two chapters are intended not only to train the eye and the hand in the use of instruments, but also to form the habit of exercising forethought, judgment. And taste in relation to the important matter of arrangement. Reasonable skill in execution having been acquired, the next step is to the delineation of solid objects. And in the treatment of projections the aim is to lead the student to draw these in a matter-oi-fact way, as they would appear from different points of view; the express design being to keep out of sight as far as possible the artificial and often useless stage machinery of Descriptive Geometry. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Blueprint Reading Basics written by Warren Hammer and published by . This book was released on 1996 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this widely used text and self-training manual has been expanded to include many new worksheets designed to facilitate the reader's ability to form a mental picture from a drawing. The book is written in a non-technical and easy to understand manner that is appropriate for machinists, mechanics, technicians, and inspectors, as well as students taking blueprint reading, machine shop, or tool and die courses.
