Download or read book Practical Manual of Biocorrosion and Biofouling for the Industry written by Mario Daniel Ferrari and published by . This book was released on 1998 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Biocorrosion written by HectorA. Videla and published by Routledge. This book was released on 2018-04-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference
Download or read book Manual of Biocorrosion written by HectorA. Videla and published by Routledge. This book was released on 2018-04-27 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference
Download or read book Biofouling and Biocorrosion in Industrial Water Systems written by Hans-Curt Flemming and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial growth and contamination ("Biofouling") in water systems represents a significant threat to the quality of waters produced for the microelectronic, pharmaceutical, petroleum, paper, food and other manufacturing industries. Biofouling can lead to biologically induced corrosion ("Biocorrosion"), which can cause severe damage to the equipment. Both biofouling and biocorrosion are frequently not recognized in time, underestimated, or linked with the wrong causes. The book represents a new approach by introducing biofilm properties and dynamics as basic principles of biofouling and biocorrosion, thus providing a better understanding and the means of fighting the undesired effects of biofilms. The most important features are: Case histories of biofouling in water treatment.- Detection and monitoring of biofouling.- Reverse osmosis membrane biofouling.- Biocide efficacy and biofouling control.- Plant design considerations for preventing biofouling.- Case histories of biocorrosion.- Detection, monitoring, control and prevention of biocorrosion.- Fundamentals of biofouling and biocorrosion mechanisms.
Download or read book A Practical Manual on Microbiologically Influenced Corrosion written by Gregory Kobrin and published by Nace International. This book was released on 1993 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microbiology of Well Biofouling written by D. Roy Cullimore and published by Routledge. This book was released on 2018-05-04 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The third book in the Sustainable Well Series, Microbiology of Well Biofouling, is the second edition of Practical Manual of Groundwater Microbiology. It is concerned with solving production problems in all types of wells. See what's new in the new edition: Addresses deleterious events in all types of wells in greater detail Discusses the generation of mass which interferes with the physical functioning of a well Covers the major innovations in the field Includes more field applicable material Completely revised and updated
Download or read book Marine and Industrial Biofouling written by Hans-Curt Flemming and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofouling is a costly problem, and it is encountered in a wide spectrum of technical systems, ranging from the shipping industry, power industry, water purification, automobile industry, paint and pharmaceuticals, to the microelectronics and food industries. Micro- and macroorganisms attach to surfaces and accumulate there, forming biofilms that cause interferences – a fundamentally natural process. Usually, a medical paradigm is applied: kill biofilms and the problem is solved. This leads to excessive biocide use. However, the success of this strategy is very limited; furthermore it leads to equipment damage and environmental pollution. Simply trying to kill the fouling organisms is clearly not seen as a successful strategy while cleaning is put forward as much more important. In this book, strategies to prevent adhesion, to mitigate the extent and effects of biofouling, and to detect and remove fouling layers are presented. Holistic approaches to the fouling process are elaborated, taking into account options such as nutrient limitation, repellent and easy-to-clean surfaces for fouling layer limitation, and replacing biocides with more environmentally friendly methods – in other words: learning how to live with fouling biofilms without suffering the damage they can do.
Download or read book Biofouling and Biocorrosion in Industrial Water Systems written by Hans-Curt Flemming and published by . This book was released on 1991-05-21 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monitoring Biocorrosion and Biofilms in Industrial Waters written by F. Blanchi and published by . This book was released on 1994 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes a practical approach to the assessment of biotic and abiotic processes at the metal/solution interface, introducing a nonconventional multipurpose sampling device that can be used in a conventional side-stream corrosion rack. The complete monitoring program for biofilms and corrosion in water-using systems includes parallel field and laboratory measurements, in addition to the sampler exposures. This device can simplify collection of samples for biofilm and corrosion product analyses, facilitate field and laboratory studies for biocide selection, and provide a useful source of samples for assessing corrosion and biofouling effects in the system. Two practical cases, involving an industrial cooling water system and a secondary oil recovery water injection line, are briefly described to illustrate the effectiveness of the monitoring program.
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book Biofouling and Biocorrosion in Industrial Water Systems written by Gill G. Geesey and published by CRC Press. This book was released on 1994-04-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofouling and Biocorrosion in Industrial Water Systems presents the state-of-the-science on biofilm processes that relate to fouling corrosion of surfaces used in industrial systems. The book explores engineering and scientific approaches to the characterization and control of biofilm processes, and it introduces new developments in the analysis and understanding of microbial processes. Several chapters have been devoted to examining the new concept of biological and chemical heterogeneity in microbial biofilms and how this has altered the way biofilm behavior is modeled.
Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. - Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion - Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion - Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion
Download or read book A Practical Manual on Microbiologically Influenced Corrosion written by Gregory Kobrin and published by Nace International. This book was released on 2001 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-03-08 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.
Download or read book Materials Performance written by and published by . This book was released on 2002 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microbiologically Influenced Corrosion Handbook written by S Borenstein and published by Elsevier. This book was released on 1994-01-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIC (microbiologically influenced corrosion) is the deterioration of metal by corrosion processes that occur either directly or indirectly as a result of the activity of living organisms. This handbook explains the interdisciplinary nature of MIC - the roles of microbiology, metallurgy and electro-chemistry are interrelated and complex. The text also looks at welding, heat treatment and other metallurgical and process variables relate to corrosion resistance, special emphasis being placed on MIC. Case histories are included and the means of detection, diagnosis and monitoring are discussed. Prevention, mitigation and replacement of MIC are also examined.
Download or read book A New Era for Microbial Corrosion Mitigation Using Nanotechnology written by Basma A. Omran and published by Springer Nature. This book was released on 2020-07-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on corrosion and microbial corrosion, providing solutions for these problems based on nanotechnology and nanobiotechnology. It introduces the causes, consequences, cost and control of corrosion processes. It gives a particular emphasis on microbial corrosion of steel and other metals in oil, gas and shipping industries. The book presents the materials vulnerable to such kind of corrosion, and the use of nanomaterials to control it.
