Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Cornelius Scheffer and published by Elsevier. This book was released on 2004-07-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. Understand the basics of vibration measurement Apply vibration analysis for different machinery faults Diagnose machinery-related problems with vibration analysis techniques
Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Paresh Girdhar and published by Newnes. This book was released on 2004 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. 1. Understand the basics of vibration measurement 2. Apply vibration analysis for different machinery faults 3. Diagnose machinery-related problems with vibration analysis techniques
Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Cornelius Scheffer and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Basics and Machine Reliability Simplified A Practical Guide to Vibration Analysis written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-11 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to identify unusual vibration occurrences and assess the general health of the test object, vibration analysis is a procedure that tracks vibration levels and looks into the patterns in vibration signals within a component, piece of equipment, or building. It is frequently conducted on both the frequency spectrum, which is derived by applying Fourier Transform to the time waveform, as well as the time waveforms of the vibration signal directly. Mechanical vibration Analysis should present 50% of any condition monitoring program. This book include a practical guide to vibration analysis to prepare practitioners for levels I II & III to become certified analyst. Numerous examples with photos are included to present how to detect different types of equipment and assets failure include: bearing, shafts misalignment, unbalance, rotor problems, electric motors and more using spectrum analysis technique.
Download or read book PRACTICAL CASE STUDIES ON VIBRATION ANALYSIS written by Debasis Bhattacharyya and published by Notion Press. This book was released on 2021-06-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration analysis is one of the most popular contemporary technologies pertaining to fault diagnosis and predictive maintenance for machineries. Beginning with a segment on the basics of vibration analysis, this book further presents 30 authentic case studies involving problems encountered in real life. This book will serve as a useful guide for the beginners in the field and it will also be an asset to practicing engineers and consultants in developing new insights from the wide range of case studies presented in the book.
Download or read book Vibration Spectrum Analysis written by Steve Goldman and published by Industrial Press Inc.. This book was released on 1999 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written for vibration analysts, predictive maintenance specialists, field mechanics, and a wide variety of engineers, Vibration Spectrum Analysis assumes no prior knowledge of advanced mathematics or mechanical engineering. It carefully guides the reader through sophisticated analysis techniques in a logical, easy-to-understand manner."--BOOK JACKET.
Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. A comprehensive introduction to a system of monitoring critical industrial equipment Optimize the availability of process machinery and greatly reduce the cost of maintenance Provides the means to improve product quality, productivity and profitability of manufacturing and production plants
Download or read book Rotating Machinery Vibration written by Maurice L. Adams and published by CRC Press. This book was released on 2000-10-24 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensivereference/text provides a thorough grounding in the fundamentals of rotating machinery vibration-treating computer model building, sources and types of vibration, and machine vibration signal analysis. Illustrating turbomachinery, vibration severity levels, condition monitoring, and rotor vibration cause identification, Ro
Download or read book Mechanical Vibrations and Condition Monitoring written by Juan Carlos A. Jauregui Correa and published by Academic Press. This book was released on 2020-03-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations and Condition Monitoring presents a collection of data and insights on the study of mechanical vibrations for the predictive maintenance of machinery. Seven chapters cover the foundations of mechanical vibrations, spectrum analysis, instruments, causes and effects of vibration, alignment and balancing methods, practical cases, and guidelines for the implementation of a predictive maintenance program. Readers will be able to use the book to make predictive maintenance decisions based on vibration analysis. This title will be useful to senior engineers and technicians looking for practical solutions to predictive maintenance problems. However, the book will also be useful to technicians looking to ground maintenance observations and decisions in the vibratory behavior of machine components. Presents data and insights into mechanical vibrations in condition monitoring and the predictive maintenance of industrial machinery Defines the key concepts related to mechanical vibration and its application for predicting mechanical failure Describes the dynamic behavior of most important mechanical components found in industrial machinery Explains fundamental concepts such as signal analysis and the Fourier transform necessary to understand mechanical vibration Provides analysis of most sources of failure in mechanical systems, affording an introduction to more complex signal analysis
Download or read book Machine Reliability and Condition Monitoring A Comprehensive Guide to Predictive Maintenance Planning written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-11-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring is the process of keeping an eye on a machine's condition parameter in order to spot any major changes that could be signs of a malfunction developing. It plays a significant role in preventive maintenance and is a major component of predictive maintenance. By combining machine sensor data that detects vibration and other characteristics (in real-time) with cutting-edge machine monitoring software, condition monitoring (CM), a maintenance strategy, anticipates machine health and safety. Predictive Maintenance strategy employs vibration analysis, thermography analysis, ultrasound analysis, oil analysis and other techniques to improve machine reliability. The goal of the strategy is to provide the stated function of the facility, with the required reliability and availability at the lowest cost.
Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.
Download or read book Fundamentals of Vibration Analysis written by Nils O. Myklestad and published by Courier Dover Publications. This book was released on 2018-05-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise textbook discusses vibration problems in engineering, dealing with systems of one and more than one degrees of freedom. A substantial section of Answers to Problems is included. 1956 edition.
Download or read book Vibration Testing written by Kenneth G. McConnell and published by John Wiley & Sons. This book was released on 1995-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consequently, the user of this equipment can be the dominant influence on the quality of test results.
Download or read book Vibrations of Power Plant Machines written by Franz Herz and published by Springer Nature. This book was released on 2020-03-16 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers professionals working at power plants guidelines and best practices for vibration problems, in order to help them identify the respective problem, grasp it, and successfully solve it. The book provides very little theoretical information (which is readily available in the existing literature) and doesn’t assume that readers have an extensive mathematical background; rather, it presents a range of well-documented, real-world case studies and examples drawn from the authors’ 50 years of experience at jobsites. Vibration problems don’t crop up very often, thanks to good maintenance and support, but if and when they do, most power plants have very little experience in assessing and solving them. Accordingly, the case studies discussed here will equip power plant engineers to quickly evaluate the vibration problem at hand (by deciding whether the machine is at risk or can continue operating) and find a practical solution.
Download or read book Machinery Oil Analysis Condition Monitoring A Practical Guide to Sampling and Analyzing Oil to Improve Equipment Reliability written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-09-27 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laboratory examination of a lubricant's characteristics, suspended impurities, and wear debris is known as oil analysis (OA). OA is carried out as part of regular predictive maintenance to deliver precise and useful data on lubricant and machine condition. Trends can be found by following the findings of oil analysis samples over the course of a certain machine. These trends can help avoid expensive repairs. Tribology is the study of wear in machinery. Tribologists frequently perform or interpret results from oil analyses. Oil analysis is a long-term program that, where relevant, can eventually be more predictive than any of the other technologies. It can take years for a plant's oil program to reach this level of sophistication and effectiveness. This book includes what all practitioners need to know to build an oil analysis program for their machine inspection. This book includes three real case studies and numerous industrial examples to improve machine reliability and enhance the condition monitoring program.
Download or read book Practical Machinery Safety written by David Macdonald and published by Elsevier. This book was released on 2004-07-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards Apply simple risk assessments and hazard design methods to your own projects Identify hazards that occur with machinery and know how to deal with them
Download or read book Machinery Vibration Balancing Special Reprint Edition written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1998-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables you to measure, isolate, and reduce rotating component's vibration, resonance, or misalignment problem. This book helps you to balance everything from ceiling fans to turbine engines, and select and apply balancing sensors and systems for single-plane and two-plane balancing and overhung and flexible-rotor balancing.
