Download or read book Practical Guide to FMEA A Proactive Approach to Failure Analysis written by Mohammed Hamed Ahmed Soliman and published by personal-lean.org. This book was released on 2020-09-27 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: FMEA (failure mode and effects analysis) is a method for gathering information about potential points of failure in a design, manufacturing process, product, or service. Failure mode (FM) refers to the manner in which something may fail. It includes potential errors that could occur, particularly errors that could have an impact on the customer. Deciphering the consequences of those breakdowns is part of effective analysis (EA). This is accomplished by ensuring that all failures can be detected, determining how frequently a failure may occur, and determining which potential failures should be prioritized. FMEA templates are commonly used by business analysts to aid in the completion of analyses. FMEA is a risk assessment tool with a 1-10 scoring scale. A one indicates low risk, while a ten indicates extremely high risk. FMEA is an effective method for development and manufacturing organizations to reduce potential failures throughout the product lifecycle. Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself. This book includes various real case studies and offers a step-by-step training for constructing FMEA.
Download or read book Practical Guide to FMEA written by Mohammed Soliman and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure mode and effect analysis (FMEA) was initiated by the aerospace industry in the 1960s to improve the reliability of systems. It is a part of total quality management programs and should be used to prevent potential failures that could affect safety, production, cost or customer satisfaction. FMEA can be used during the design, service or manufacturing processes to minimize the risk of failure, improving the customer's confidence while also reducing costs.
Download or read book Machinery Oil Analysis Condition Monitoring A Practical Guide to Sampling and Analyzing Oil to Improve Equipment Reliability written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-09-27 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laboratory examination of a lubricant's characteristics, suspended impurities, and wear debris is known as oil analysis (OA). OA is carried out as part of regular predictive maintenance to deliver precise and useful data on lubricant and machine condition. Trends can be found by following the findings of oil analysis samples over the course of a certain machine. These trends can help avoid expensive repairs. Tribology is the study of wear in machinery. Tribologists frequently perform or interpret results from oil analyses. Oil analysis is a long-term program that, where relevant, can eventually be more predictive than any of the other technologies. It can take years for a plant's oil program to reach this level of sophistication and effectiveness. This book includes what all practitioners need to know to build an oil analysis program for their machine inspection. This book includes three real case studies and numerous industrial examples to improve machine reliability and enhance the condition monitoring program.
Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.
Download or read book A Failure Mode and Effect Analysis FMEA is a systematic method for identifying and preventing product and process problems before they occur FMEAs are focused on preventing defects enhancing safety and increasing customer satisfaction FMEAs are conducted in the product design or process development stages although conducting an FMEA on existing products and processes can also yield substantial benefits Six Sigma s project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product it is designed into the development process itself written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Failure Mode and Effect Analysis FMEA is a systematic method for identifying and preventing product and process problems before they occur. FMEAs are focused on preventing defects, enhancing safety and increasing customer satisfaction. FMEAs are conducted in the product design or process development stages, although conducting an FMEA on existing products and processes can also yield substantial benefits. Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself.
Download or read book Vibration Basics and Machine Reliability Simplified A Practical Guide to Vibration Analysis written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-11 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to identify unusual vibration occurrences and assess the general health of the test object, vibration analysis is a procedure that tracks vibration levels and looks into the patterns in vibration signals within a component, piece of equipment, or building. It is frequently conducted on both the frequency spectrum, which is derived by applying Fourier Transform to the time waveform, as well as the time waveforms of the vibration signal directly. Mechanical vibration Analysis should present 50% of any condition monitoring program. This book include a practical guide to vibration analysis to prepare practitioners for levels I II & III to become certified analyst. Numerous examples with photos are included to present how to detect different types of equipment and assets failure include: bearing, shafts misalignment, unbalance, rotor problems, electric motors and more using spectrum analysis technique.
Download or read book The ASQ Pocket Guide to Failure Mode and Effect Analysis FMEA written by D.H. Stamatis and published by Quality Press. This book was released on 2014-08-21 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recognition that all well-managed companies are interested in preventing or at least minimizing risk in their operations is the concept of risk management analysis. This pocket guide explores the process of evaluation of risk by utilizing one of the core methodologies available: the failure mode and effect analysis (FMEA). The intent in this “Pocket FMEA” is to provide the reader with a booklet that makes the FMEA concept easy to understand and provide some guidelines as to why FMEA is used in so many industries with positive results. The booklet is not a complete reference on FMEA, but rather a summary guide for anyone who wants some fast information regarding failures and how to deal with them. It covers risk, reliability and FMEA, prerequisites of FMEA, what an FMEA is, robustness, the FMEA form and rankings, types of FMEA, and much more.
Download or read book Design Review Based on Failure Mode written by Mohammed Hamed Ahmed Soliman and published by personal-lean.org. This book was released on 2024-04-07 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toyota doesn't just make high-quality products; they also have a process for making sure everything they do is high-quality. Next time you want to say Toyota isn't that great, think about how their way of doing things could help you make better quality products. Reliability is about having a product or service that can be trusted is really important for making customers happy. This means that the product will work the way the customer wants it to, and it will keep working well for a long time. Quality experts are basically saying that it is very important to focus on improving quality in all aspects of a business. They believe that businesses should prioritize quality in order to be successful. The more complicated the product is, the harder this task gets. Before World War II, the military, aerospace, and aircraft industries used the failure mode and effect analysis (FMEA) approach. Toyota then invented its production system after the war. FMEA has been around since the middle of the 20th century, especially in the aerospace and military industries. FMEA was made in the 1940s and used by the U.S The military works to find and fix problems in production before they happen. The method worked well, so NASA used it for different projects like Apollo and Voyager in the 1960s. Nowadays Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself. The DRBFM methodology was created by Tatsuhiko Yoshimura, who is an expert in quality and a professor at Kyushu University in Japan. Yoshimura understood that making changes without the right documents can cause design problems. He used the idea of preventing problems before they happen to come up with his own way of thinking called DRBFM.
Download or read book Toyota Production System concepts written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main difficulties for people practicing lean is trying to find a clear and direct link between doing something that aligns with lean principles and the financial advantage it brings. Toyota follows certain principles in regards to cost-benefit analysis (CBA) by making management decisions based on thinking about the financial impact in the long run rather than focusing on short-term gains.
Download or read book A Complete Guide to Just in Time Production Inside Toyota s Mind written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2023-09-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Yes, people called it an inventory reduction program when they first heard of it. “Just in time” is one of the main pillars in the TPS. “Just in time” ideally means “one-piece flow.” Inventory is the greatest waste in the process, and it hides many problems, such as quality problems, breakdown times, waiting waste, and more. Let’s get back to history. Prior to the 1970 oil crisis, very few people in the world know what Toyota was up to. The fact that it emerged stronger than ever while many of its competitors were quite battered made people take notice. People went to Japan to find out how Toyota had done this. What people found was that Toyota was doing something called “just in time.” In the West, this was interpreted as an inventory reduction program. As a result, it became known as the “just-in-time inventory” program. Nobody really believed inventory could be taken out of the whole value stream. Therefore, “just in time” came to mean “go beat the heck out of your suppliers.” The big three auto companies (Ford, General Motors, and Chrysler) had lots of power over their suppliers, and they became pretty expert at this tactic—to their eventual detriment. James P. Womack came forward with Lean Thinking in 1996 and helped many to see the whole value chain. He showed how waste clogs the system and how continuous improvement was needed to link all parts of the chain to customer demand. He explained his findings in plain English, but once again people didn’t hear. Lean might be an element of the larger strategy, but it is most likely to be relegated to plant and manufacturing work. As a result, one company after another has tried lean and failed. Many people believe that just-in-time inventory equals zero inventory. The ideal situation is one-piece flow, which can only be achieved through the use of a manufacturing cell. The inventory buffer exists, but it is rarely used. The Andon system includes a buffer. There is a safeguard in place to protect your customer. There is a buffer to prevent the entire manufacturing line from being shut down to rectify a problem. There is a buffer in place to prevent the breakdown of a vital manufacturing process. Just-in-time production is a manufacturing system that produces and delivers only what is required, only when it is required, and only in the amount required. The Toyota Production System is built on two pillars: JIT and jidoka. JIT is based on heijunka and consists of three operating elements: the pull system, takt time, and continuous flow.
Download or read book Reliability Engineering and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2009-09-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools to Proactively Predict Failure The prediction of failures involves uncertainty, and problems associated with failures are inherently probabilistic. Their solution requires optimal tools to analyze strength of evidence and understand failure events and processes to gauge confidence in a design’s reliability. Reliability Engineering and Risk Analysis: A Practical Guide, Second Edition has already introduced a generation of engineers to the practical methods and techniques used in reliability and risk studies applicable to numerous disciplines. Written for both practicing professionals and engineering students, this comprehensive overview of reliability and risk analysis techniques has been fully updated, expanded, and revised to meet current needs. It concentrates on reliability analysis of complex systems and their components and also presents basic risk analysis techniques. Since reliability analysis is a multi-disciplinary subject, the scope of this book applies to most engineering disciplines, and its content is primarily based on the materials used in undergraduate and graduate-level courses at the University of Maryland. This book has greatly benefited from its authors' industrial experience. It balances a mixture of basic theory and applications and presents a large number of examples to illustrate various technical subjects. A proven educational tool, this bestselling classic will serve anyone working on real-life failure analysis and prediction problems.
Download or read book Toyota Prodcution System Concepts written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heijunka, which means "production smoothing or leveling" in Japanese, is a method that helps balance production in all areas and with suppliers over time. It aims to make Just-In-Time (JIT) production easier. Heijunka is an important part of Just-in-Time (JIT) production. It means finding and keeping a consistent level of production. The main purpose of using the Heijunka technique is to provide goods at a consistent pace, which allows other operationsto also run smoothly and predictably. This helps decrease wastes and the amount of inventory.
Download or read book The Ultimate Guide to Successful Lean Transformation written by Mohammed Hamed Ahmed Soliman and published by personal-lean.org. This book was released on 2020-11-30 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many businesses say that lean failed to meet their long-term objectives and that the improvements it brought about were only temporary. When businesses utilize lean as a toolkit, copying and pasting the methodologies without trying to adapt the employee culture, manage the improvement process, maintain the outcomes, and grow their leaders, 7 out of every 10 lean projects fail. The primary objective when the Toyota production method was developed was to eliminate wastes from the shop floor by utilizing some lean techniques and technologies. What wasn't made obvious was that Toyota would need to invest heavily in personnel development and training throughout a protracted leadership development process. An issue with management and leadership, as well as an incorrect understanding of human behavior and the necessary culture for success, is the failure to achieve and sustain improvement.
Download or read book Takt Time A Guide to the Very Basic Lean Calculation written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-16 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takt time is calculated as the amount of manufacturing time that is available divided by the volume of orders. In the 1930s, the German aviation industry employed Takt for the first time as a production management tool. The idea was widely used within Toyota in the 1950s, and by the late 1960s, it had been adopted by the majority of the Toyota supplier base. Every month, Toyota assesses the takt for a process, with a modifying review occurring every 10 days. Takt time is used to properly balance supply and demand. It gives a lean production system its beating heart.
Download or read book Creating a One Piece Flow and Production Cell Just in time Production with Toyota s Single Piece Flow written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-12-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-piece flow, also known as continuous flow, is considered the ultimate lean goal. It describes how items are efficiently moved from one stage of the process to the next by designing the workflow around the requirements of the product. To get from point A to point B is the objective. Any waste or halt in production is equivalent to the stones and dams that direct the flow of water. We examine our layouts, devices, procedures, rules, cultures, and knowledge while attempting to implement flow to see what might be causing these flow-blocking factors. Continuous flow aids in waste reduction. Because there is harmony and rhythm between each stage of the process, wastes are eliminated from the system. This enables each team member to provide value rather than produce waste. Processing waste is decreased because there is naturally less rework (or overprocessing), there is only as much work done as the customer is prepared to pay for, and there is only one accepted technique to complete the task (no bad processing).
Download or read book The Problem Solving Kata as a Tool for Culture Change Building True Lean Organizations written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-11-09 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some businesses have reduced staff and made resource cuts to survive the global economic downturn, while others have improved business practices and culture. Unfortunately, there is still a difference between successful and less successful businesses in terms of culture adaptability, people management, and process management. In organisations like Toyota, which, in contrast to its rivals, has a mindset of process improvement, culture drives competitive advantage. Other businesses might benefit from Toyota's teachings by changing their routines for behaving and thinking in order to increase staff performance.
Download or read book Lean Accounting Why Accounting Department Should Switch to Lean written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-10-02 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the past decades, financial folks relied on old principles, techniques and theories in determining the performance of the companies and give feed backs to the executives and CEOs so they can make the necessary improvement and take decisions. The CEO wants help finding the resources to fund a new project; he wants to know where we can improve costs in products and services, and he wants to know whether improvements made have resulted in financial gain. The CEO needs help seeing where the company has improved or declined and what the future looks like given the current circumstances.
