Download or read book Sustainable Power Systems written by Nava Raj Karki and published by Springer. This book was released on 2017-01-10 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with quantifying and analyzing the risks associated with sustainable energy technology growth in electric power systems, and developing appropriate models and methodologies to mitigate the risks and improve the overall system performance. The rapid increase in the installation of renewable energy sources in electric power systems has given rise to a wide range of problems related to planning and operation of power systems to maintain quality, stability, reliability and efficiency. Additionally, there is a growing global environmental concern regarding increasing emissions from the electric power generation required to meet rising energy needs and support sustainable and inclusive development. The phenomenon of low voltage ride through (LVRT), common to wind energy systems, is discussed, and ways to tackle the same are proposed in the first chapter. Subsequent chapters propose methods of optimizing a sustainable and smart microgrid, and supplying electricity to remote areas of a developing country with no immediate possibility of national grid extension. The economic benefit and technical challenges of forming localized minigrid are also discussed. The book proposes a method for reliability assessment of a power grid with sustainable power transportation system. The issue of weak link in power system is very important as it will provide the system operators and planners to take necessary measures to strengthen the system. An approach to determine the weak parts of the system and its unreliability is proposed. With increasing installation of HVDC power transmission and development of efficient and low cost power electronic devices, the DC microgrids are becoming a common phenomenon. Their existence together with AC Grids result in Hybrid AC/DC Microgrids, which are discussed in this book. It further presents a method for reliability evaluation of a distribution system with network reconfiguration in the presence of distributed generation. The important problems in sustainable energy growth, and their potential solutions discussed and presented in the book should be of great interest to engineers, policy makers, researchers and academics in the area of electric power engineering.

Download or read book Smart and Intelligent Systems written by Subhojit Dawn and published by Springer Nature. This book was released on 2021-08-30 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of high-quality research papers presented at the International Conference on Smart and Intelligent Systems (SIS 2021), which will be held in Velagapudi Ramakrishna Siddhartha Engineering College (VRSEC), Andhra Pradesh, India, during February 25–26, 2021, in virtual mode. It highlights how recent informatics intelligent systems have successfully been used to develop innovative smart techniques and infrastructure in the field of modern engineering and technology. The book will also be of interest to those working in the field of computational intelligence, smart computer network and security analysis, control and automation system, cloud computing, fog computing and IoT, smart grid communication, smart cities, solar cell synthesis and their performance, green technology, and many more. The contents of this book prove useful to researchers and professionals.

Download or read book Power System Control Under Cascading Failures written by Kai Sun and published by John Wiley & Sons. This book was released on 2019-01-29 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive introduction to the issues of control of power systems during cascading outages and restoration process Power System Control Under Cascading Failures offers comprehensive coverage of three major topics related to prevention of cascading power outages in a power transmission grid: modelling and analysis, system separation and power system restoration. The book examines modelling and analysis of cascading failures for reliable and efficient simulation and better understanding of important mechanisms, root causes and propagation patterns of failures and power outages. Second, it covers controlled system separation to mitigate cascading failures addressing key questions such as where, when and how to separate. Third, the text explores optimal system restoration from cascading power outages and blackouts by well-designed milestones, optimised procedures and emerging techniques. The authors — noted experts in the field — include state-of-the-art methods that are illustrated in detail as well as practical examples that show how to use them to address realistic problems and improve current practices. This important resource: Contains comprehensive coverage of a focused area of cascading power system outages, addressing modelling and analysis, system separation and power system restoration Offers a description of theoretical models to analyse outages, methods to identify control actions to prevent propagation of outages and restore the system Suggests state-of-the-art methods that are illustrated in detail with hands-on examples that address realistic problems to help improve current practices Includes companion website with samples, codes and examples to support the text Written for postgraduate students, researchers, specialists, planners and operation engineers from industry, Power System Control Under Cascading Failures contains a review of a focused area of cascading power system outages, addresses modelling and analysis, system separation, and power system restoration.

Download or read book Advances in Energy and Power Systems written by Sri Niwas Singh and published by Springer. This book was released on 2018-05-31 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Advancement in Energy, Drives, and Control. It covers pioneering topics in the field of renewable energy and power management, including energy storage, distribution, and control. It also discusses methods of optimizing power distribution and generation systems. This book is of use to researchers, professionals, and students from across engineering disciplines.

Download or read book Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems ICITES2013 written by Jengnan Juang and published by Springer Science & Business. This book was released on 2014-04-18 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer reviewed research papers from the conference, Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications and structure dynamics and control.

Download or read book Numerical Simulations of Physical and Engineering Processes written by Jan Awrejcewicz and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Simulations of Physical and Engineering Process is an edited book divided into two parts. Part I devoted to Physical Processes contains 14 chapters, whereas Part II titled Engineering Processes has 13 contributions. The book handles the recent research devoted to numerical simulations of physical and engineering systems. It can be treated as a bridge linking various numerical approaches of two closely inter-related branches of science, i.e. physics and engineering. Since the numerical simulations play a key role in both theoretical and application oriented research, professional reference books are highly needed by pure research scientists, applied mathematicians, engineers as well post-graduate students. In other words, it is expected that the book will serve as an effective tool in training the mentioned groups of researchers and beyond.

Download or read book Handbook of Power Electronics in Autonomous and Electric Vehicles written by Muhammad H. Rashid and published by Elsevier. This book was released on 2024-07-22 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Power Electronics in Autonomous and Electric Vehicles provides advanced knowledge on autonomous systems, electric propulsion in electric vehicles, radars and sensors for autonomous systems, and relevant aspects of energy storage and battery charging. The work is designed to provide clear technical presentation with a focus on commercial viability. It supports any and all aspects of a project requiring specialist design, analysis, installation, commissioning and maintenance services. With this book in hand, engineers will be able to execute design, analysis and evaluation of assigned projects using sound engineering principles and commercial requirements, policies, and product and program requirements. - Presents core power systems and engineering applications relevant to autonomous and electric vehicles in characteristic depth and technical presentation - Offers practical support and guidance with detailed examples and applications for laboratory vehicular test plans and automotive field experimentation - Includes modern technical coverage of emergent fields, including sensors and radars, battery charging and monitoring, and vehicle cybersecurity

Download or read book Energy Storage Systems and Power Conversion Electronics for E Transportation and Smart Grid written by Sergio Saponara and published by MDPI. This book was released on 2020-12-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint in book form of the Energies MDPI Journal Special Issue , entitled “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid”. The Special Issue was managed by two Guest Editors from Italy and Norway: Professor Sergio Saponara from the University of Pisa and Professor Lucian MIHET-POPA from Østfold University College, in close cooperation with the Editors from Energies. The papers published in this SI are related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification, and on the evolution from the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for the smart grid, as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at the levels of both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) are proposed. Research and technology transfer activities in energy storage systems, such as batteries and super/ultra-capacitors, are essential for the success of electric transportation, and to foster the use of renewable energy sources. Energy storage systems are the key technology to solve these issues, and to increase the adoption of renewable energy sources in the smart grid.

Download or read book Renewable Energy written by Manuel Perez Donsion and published by Cambridge Scholars Publishing. This book was released on 2016-02-29 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a scientific point of view, several challenges to renewable energy come from the intermittent nature of energy sources such as wind, solar photovoltaic and solar thermal. These problems are currently being addressed with research on power electronics converters, storage systems, Artificial Intelligence techniques, new materials and production technologies, numerical analysis techniques, among others. This research endeavours to reduce costs and find alternative energy sources that are competitive with fossil fuels. Consequently, these efforts of the scientific community will contribute to improving the quality of life on the planet. This book summarises ten years of contributions to these topics, and contains a selection of the best papers presented at the International Conferences on Renewable Energy and Power Quality (ICREPQ) from 2003 to 2012. These contributions have been selected by a team of voluntary reviewers, with two to four reviewers assigned to each paper. At the end of this process only about 5% of all presented papers were selected. Considering each paper had been reviewed before, in order to be accepted for the conference, the selected papers represent “the best of the best”. The contributors to this book represent some of the leading authorities in their areas of expertise. This book will be of particular interest to professional engineers and researchers dealing with renewable energy exploitation, but will also prove useful to postgraduate level students. In addition, it can be used as a reference book for engineers, physicists and mathematicians who are interested and involved in the operation, project management, design, and analysis of renewable sources equipment.

Download or read book Handbook of PI and PID Controller Tuning Rules written by Aidan O'Dwyer and published by Imperial College Press. This book was released on 2009 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of automatic controllers used to compensate industrial processes are PI or PID type. This book comprehensively compiles, using a unified notation, tuning rules for these controllers proposed from 1935 to 2008. The tuning rules are carefully categorized and application information about each rule is given. The book discusses controller architecture and process modeling issues, as well as the performance and robustness of loops compensated with PI or PID controllers. This unique publication brings together in an easy-to-use format material previously published in a large number of papers and books.This wholly revised third edition extends the presentation of PI and PID controller tuning rules, for single variable processes with time delays, to include additional rules compiled since the second edition was published in 2006.

Download or read book Energy Storage in Power Systems written by Francisco Díaz-González and published by John Wiley & Sons. This book was released on 2016-03-02 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last century, energy storage systems (ESSs) have continued to evolve and adapt to changing energy requirements and technological advances. Energy Storage in Power Systems describes the essential principles needed to understand the role of ESSs in modern electrical power systems, highlighting their application for the grid integration of renewable-based generation. Key features: Defines the basis of electrical power systems, characterized by a high and increasing penetration of renewable-based generation. Describes the fundamentals, main characteristics and components of energy storage technologies, with an emphasis on electrical energy storage types. Contains real examples depicting the application of energy storage systems in the power system. Features case studies with and without solutions on modelling, simulation and optimization techniques. Although primarily targeted at researchers and senior graduate students, Energy Storage in Power Systems is also highly useful to scientists and engineers wanting to gain an introduction to the field of energy storage and more specifically its application to modern power systems.

Download or read book Multiphase Hybrid Electric Machines written by Ahmad S. Al-Adsani and published by Springer Nature. This book was released on 2021-09-02 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an insight into the design, modeling, control, and application of multiphase hybrid permanent magnet machines for electrified powertrains in electric and hybrid electric vehicles. The authors present an overview of electric and hybrid electric vehicles, hybrid electric machine topologies, hybrid permanent magnet (HPM) machine design, multiphase hybrid machines, operation of multiphase generators in series hybrid electric vehicles (SHEV), and machine hardware build-up and testing. Readers will gain an understanding of multiphase machine configuration, their design, control, and recent applications, along with the benefits they provide, and learn general design steps, prototyping, and hardware build-up processes of multiphase electric machines. Multiphase Hybrid Electric Machines: Applications for Electrified Powertrains will be a valuable reference for undergraduate and graduate students, researchers, and practicing engineers, working on electric/hybrid electric vehicles, as well as electric machine applications in renewable energy systems specifically wind turbines, HVAC systems, robotics, and aerospace industry.

Download or read book Advanced Multilevel Converters and Applications in Grid Integration written by Ali Iftekhar Maswood and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive survey of advanced multilevel converter design, control, operation and grid-connected applications Advanced Multilevel Converters and Applications in Grid Integration presents a comprehensive review of the core principles of advanced multilevel converters, which require fewer components and provide higher power conversion efficiency and output power quality. The authors – noted experts in the field – explain in detail the operation principles and control strategies and present the mathematical expressions and design procedures of their components. The text examines the advantages and disadvantages compared to the classical multilevel and two level power converters. The authors also include examples of the industrial applications of the advanced multilevel converters and offer thoughtful explanations on their control strategies. Advanced Multilevel Converters and Applications in Grid Integration provides a clear understanding of the gap difference between research conducted and the current industrial needs. This important guide: Puts the focus on the new challenges and topics in related areas such as modulation methods, harmonic analysis, voltage balancing and balanced current injection Makes a strong link between the fundamental concepts of power converters and advances multilevel converter topologies and examines their control strategies, together with practical engineering considerations Provides a valid reference for further developments in the multilevel converters design issue Contains simulations files for further study Written for university students in electrical engineering, researchers in areas of multilevel converters, high-power converters and engineers and operators in power industry, Advanced Multilevel Converters and Applications in Grid Integration offers a comprehensive review of the core principles of advanced multilevel converters, with contributions from noted experts in the field.

Download or read book Power Electronics in Renewable Energy Systems written by Teuvo Suntio and published by MDPI. This book was released on 2019-06-24 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of 30 scientific papers which address the problems associated with the use of power electronic converters in renewable energy source-based systems. Relevant problems associated with the use of power electronic converters to integrate renewable energy systems to the power grid are presented. Some of the covered topics relate to the integration of photovoltaic and wind energy generators into the rest of the system, and to the use of energy storage to mitigate power fluctuations, which are a characteristic of renewable energy systems. The book provides a good overview of the abovementioned topics.

Download or read book Fuzzy Logic written by Elmer Dadios and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy Logic is becoming an essential method of solving problems in all domains. It gives tremendous impact on the design of autonomous intelligent systems. The purpose of this book is to introduce Hybrid Algorithms, Techniques, and Implementations of Fuzzy Logic. The book consists of thirteen chapters highlighting models and principles of fuzzy logic and issues on its techniques and implementations. The intended readers of this book are engineers, researchers, and graduate students interested in fuzzy logic systems.

Download or read book Power Converters Drives and Controls for Sustainable Operations written by S. Ganesh Kumar and published by John Wiley & Sons. This book was released on 2023-08-01 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: POWER CONVERTERS, DRIVES AND CONTROLS FOR SUSTAINABLE OPERATIONS Written and edited by a group of experts in the field, this groundbreaking reference work sets the standard for engineers, students, and professionals working with power converters, drives, and controls, offering the scientific community a way towards combating sustainable operations. The future of energy and power generation is complex. Demand is increasing, and the demand for cleaner energy and electric vehicles (EVs) is increasing with it. With this increase in demand comes an increase in the demand for power converters. Part one of this book is on switched-mode converters and deals with the need for power converters, their topologies, principles of operation, their steady-state performance, and applications. Conventional topologies like buck, boost, buck-boost converters, inverters, multilevel inverters, and derived topologies are covered in part one with their applications in fuel cells, photovoltaics (PVs), and EVs. Part two is concerned with electrical machines and converters used for EV applications. Standards for EV, charging infrastructure, and wireless charging methodologies are addressed. The last part deals with the dynamic model of the switched-mode converters. In any DC-DC converter, it is imperative to control the output voltage as desired. Such a control may be achieved in a variety of ways. While several types of control strategies are being evolved, the popular method of control is through the duty cycle of the switch at a constant switching frequency. This part of the book briefly reviews the conventional control theory and builds on the same to develop advanced techniques in the closed-loop control of switch mode power converters (SMPC), such as sliding mode control, passivity-based control, model predictive control (MPC), fuzzy logic control (FLC), and backstepping control. A standard reference work for veteran engineers, scientists, and technicians, this outstanding new volume is also a valuable introduction to new hires and students. Useful to academics, researchers, engineers, students, technicians, and other industry professionals, it is a must-have for any library.

Download or read book Proceedings of 2nd International Conference on Intelligent Computing and Applications written by P. Deiva Sundari and published by Springer. This book was released on 2016-10-12 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second International Conference on Intelligent Computing and Applications was the annual research conference aimed to bring together researchers around the world to exchange research results and address open issues in all aspects of Intelligent Computing and Applications. The main objective of the second edition of the conference for the scientists, scholars, engineers and students from the academia and the industry is to present ongoing research activities and hence to foster research relations between the Universities and the Industry. The theme of the conference unified the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in computational intelligence and bridges theoretical research concepts with applications. The conference covered vital issues ranging from intelligent computing, soft computing, and communication to machine learning, industrial automation, process technology and robotics. This conference also provided variety of opportunities for the delegates to exchange ideas, applications and experiences, to establish research relations and to find global partners for future collaboration.