Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 3 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-07 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some power electronic converters are specifically designed to power equipment under a smoothed DC voltage. Therefore, the filtering part necessarily involves the use of auxiliary passive components (inductors and capacitors). This book deals with technical aspects such as classical separation between isolated and non-isolated power supplies, and soft switching through a special converter. It addresses the problem of regulating the output voltage of the switching power supplies in terms of modeling and obtaining transfer of SMPS functions. Power Electronics for Industry and Transport, Volume 3, offers a case study of an isolated flyback power which the complete design is presented: the active and passive components are sized based on the specifications initially set. Particular attention is given to the converter output capacitors and all the surrounding organs. Introducing Essential notions in power electronics from both the theoretical and technological perspectives Detailed chapters with a focus on switch-mode power supplies, another key area in which power electronics is used is in the supply of energy to a variety of electronic equipment for signal and information processing Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications

Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 2 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-11 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of power electronic converters (DC / DC, DC / AC, AC / DC and AC / AC) conventionally used in industrial and transportation applications, specifically for the supply of electric machines with variable speed drop off window. From the perspective of design and sizing, this book presents the different functions encountered in a modular way for power electronics.Power Converters and Their Control details less traditional topics such as matrix converters and multilevel converters. This book also features a case study design of an industrial controller, which is a synthesis (except the AC / AC direct conversion) of the study subjects, including sizing associated passive components. Introducing essential notions in power electronics from both theoretical and technological perspectives Detailed chapters focusing on power supplies for electrical machinery, including a case study of full dimensioning of an industrial variable-speed drive Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications

Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 1 written by Nicolas Patin and published by Elsevier. This book was released on 2015-04-09 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics is based on the switching operating mode of semiconductor components. On this basis, the concepts of type (voltage or current) and reversibility of interconnected sources make it possible to apply a methodology for the synthesis of various types of converters.Here the author presents the major types of components available, always from a user’s point of view, with the gate drive/fire control and other auxiliary circuits that are required for their proper functioning (snubbers, for example). The different passive components (capacitors, coils and transformers) are discussed, as well as printed circuit technology, especially in the aspect of their design.This book also focuses on the importance of packaging by reviewing the electrical representation of components’ thermal models and the currently available electronics’ cooling technologies. Modeling is discussed, as well as different technological aspects used in the engineering design of an electronic power converter, useful for obtaining satisfactory performance and reliability. Presenting the essential notions in power electronics from both the theoretical and technological perspectives Dedicated chapters with a focus on connection rules, reversibility and impact choices of switches for converter synthesis Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications

Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 4 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-20 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: If the operation of electronic components switching scheme to reduce congestion and losses (in power converters in general and switching power supplies in particular), it also generates electromagnetic type of pollution in its immediate environment. Power Electronics for Industry and Transport, Volume 4 is devoted to electromagnetic compatibility. It presents the sources of disturbance and the square wave signal, spectral modeling generic perturbation. Disturbances propagation mechanisms called "lumped" by couplings such as a common impedance, a parasitic capacitance or a mutual and "distributed constant", for which the spatial-temporal character must be taken into account, are also covered. This book also provides spectral analysis among other items that contain inequality Heisenberg-Gabor, very useful for understanding the spread spectrum PWM type signals. Introducing essential notions in power electronics from both theoretical and technological perspectives Detailed chapters with a focus on electromagnetic compatibility Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications

Download or read book Power Electronics Applied to Industrial Systems and Transports written by Nicolas Patin and published by Elsevier. This book was released on 2016-04-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through three detailed chapters, this book outlines the functions and capabilities of static converters such as sensors used in protection devices and energy storage devices with a thorough review of the technologies and applications of all these components, including monitoring aspects. The author outlines the main quantities to monitor in power converters (current, voltage and temperature) and the sensor technologies that are currently available in the market, with often experienced practical measurement problems and analog circuits allowing you to overcome these issues. Presenting measurements and the physical phenomena, which impact the accuracy of measures Provides and overview of the main technologies of sensors available on the market, each with their advantages and drawbacks Protection devices are shown for all kind of failures, helping you to designing reliable converters and guarantee precision within a rigorous framework

Download or read book Power Electronics for Renewable Energy Systems Transportation and Industrial Applications written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2014-06-02 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiles current research into the analysis and design of power electronic converters for industrial applications and renewable energy systems, presenting modern and future applications of power electronics systems in the field of electrical vehicles With emphasis on the importance and long-term viability of Power Electronics for Renewable Energy this book brings together the state of the art knowledge and cutting-edge techniques in various stages of research. The topics included are not currently available for practicing professionals and aim to enable the reader to directly apply the knowledge gained to their designs. The book addresses the practical issues of current and future electric and plug-in hybrid electric vehicles (PHEVs), and focuses primarily on power electronics and motor drives based solutions for electric vehicle (EV) technologies. Propulsion system requirements and motor sizing for EVs is discussed, along with practical system sizing examples. Key EV battery technologies are explained as well as corresponding battery management issues. PHEV power system architectures and advanced power electronics intensive charging infrastructures for EVs and PHEVs are detailed. EV/PHEV interface with renewable energy is described, with practical examples. This book explores new topics for further research needed world-wide, and defines existing challenges, concerns, and selected problems that comply with international trends, standards, and programs for electric power conversion, distribution, and sustainable energy development. It will lead to the advancement of the current state-of-the art applications of power electronics for renewable energy, transportation, and industrial applications and will help add experience in the various industries and academia about the energy conversion technology and distributed energy sources. Combines state of the art global expertise to present the latest research on power electronics and its application in transportation, renewable energy and different industrial applications Offers an overview of existing technology and future trends, with discussion and analysis of different types of converters and control techniques (power converters, high performance power devices, power system, high performance control system and novel applications) Systematic explanation to provide researchers with enough background and understanding to go deeper in the topics covered in the book

Download or read book Power Converters with Digital Filter Feedback Control written by Keng C. Wu and published by Academic Press. This book was released on 2016-01-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Converter with Digital Filter Feedback Control presents a logical sequence that leads to the identification, extraction, formulation, conversion, and implementation for the control function needed in electrical power equipment systems. This book builds a bridge for moving a power converter with conventional analog feedback to one with modern digital filter control and enlists the state space averaging technique to identify the core control function in analytical, close form in s-domain (Laplace). It is a useful reference for all professionals and electrical engineers engaged in electrical power equipment/systems design, integration, and management. Offers logical sequences to identification, extraction, formulation, conversion, and implementation for the control function needed Contains step-by-step instructions on how to take existing analog designed power processors and move them to the digital realm Presents ways to extract gain functions for many power converters’ power processing stages and their supporting circuitry

Download or read book Design of Transient Protection Systems written by Nihal Kularatna and published by Elsevier. This book was released on 2018-11-30 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Transient Protection Systems: Including Supercapacitor Based Design Approaches for Surge Protectors is the only reference to consider surge protection for end-user equipment. This book fills the gap between academia and industry, presenting new product development approaches, such as the supercapacitor assisted surge absorber (SCASA) technique. It discusses protecting gear for modern electronic systems and consumer electronics, while also addressing the chain of design, development, implementation, recent theory and practice of developing transient surge protection systems. In addition, it considers all relevant technical aspects of testing commercial surge protectors, advances in surge protection products, components, and the abilities of commercial supercapacitors. Provides unique, patented techniques for transient protectors based on supercapacitors Includes recent advances in surge protection Links scattered information from within academia and industry with new product development approaches on surge protection for end-user equipment

Download or read book Power Electronics for Next Generation Drives and Energy Systems written by Institute Post-Doctoral Fellow Nayan Kumar and published by Energy Engineering. This book was released on 2023-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of this reference book cover power electronics for drives and energy systems for electrified transport and the development of the power grid. Volume 1 covers converters and control for drives, while Volume 2 addresses clean generation and power grids.

Download or read book Advanced Field Effect Transistors written by Dharmendra Singh Yadav and published by CRC Press. This book was released on 2023-12-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Field-Effect Transistors: Theory and Applications offers a fresh perspective on the design and analysis of advanced field-effect transistor (FET) devices and their applications. The text emphasizes both fundamental and new paradigms that are essential for upcoming advancement in the field of transistors beyond complementary metal–oxide–semiconductors (CMOS). This book uses lucid, intuitive language to gradually increase the comprehension of readers about the key concepts of FETs, including their theory and applications. In order to improve readers’ learning opportunities, Advanced Field-Effect Transistors: Theory and Applications presents a wide range of crucial topics: Design and challenges in tunneling FETs Various modeling approaches for FETs Study of organic thin-film transistors Biosensing applications of FETs Implementation of memory and logic gates with FETs The advent of low-power semiconductor devices and related implications for upcoming technology nodes provide valuable insight into low-power devices and their applicability in wireless, biosensing, and circuit aspects. As a result, researchers are constantly looking for new semiconductor devices to meet consumer demand. This book gives more details about all aspects of the low-power technology, including ongoing and prospective circumstances with fundamentals of FET devices as well as sophisticated low-power applications.

Download or read book Power Electronics for Next Generation Drives and Energy Systems written by Nayan Kumar and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of this reference book cover power electronics for drives and energy systems for electrified transport and the development of the power grid. Volume 1 covers converters and control for drives, while Volume 2 addresses clean generation and power grids.

Download or read book Electric Transportation Systems in Smart Power Grids written by Hassan Haes Alhelou and published by CRC Press. This book was released on 2023-02-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The leading countries around the globe, including Australia, have taken serious steps to decarbonize their energy and transportation sectors as part of their obligations for a suitable future with fewer emissions and a better environment. The decarbonization plans in different countries have resulted in changes such as increases in the penetration level of renewable energy sources and the introduction of electric vehicles as a target for future transportation systems. This is the point where mobility meets electricity and brings new challenges and opportunities, especially in the integration with modern power systems. The main impact would be on the demand-side and the distribution network. These impacts would be also reflected in the operation, control, security, and stability of transmission systems. This creates a new grid architecture characterized by a growing variability and uncertainties. Moreover, the growth in the share of renewable energy in the total energy market is one of the major causes of the increasing fluctuations in the balance between generation and consumption in the whole system. Therefore, the key challenge lies in developing new concepts to ensure the effective integration of distributed energy resources and electric transportation systems, including EVs, into existing and future market structures. Electric Transportation Systems in Smart Power Grids address how these issues—EVs, E-buses, and other smart appliances on the demand side—can be aggregated to form virtual power plants, which are considered an efficient solution to provide operational flexibility to the grid. The book also discusses how EV-based virtual power plants can also provide myriad services for distribution system operators, transmission system operators, and even local prosumers within the energy community. Features: Describes the services required to power systems from EVs and electric transportation sector Covers frequency control in modern power systems using aggregated EVs Discusses the integration and interaction between EVs and Smart grids Introduces electric vehicle aggregation methods for supporting power systems Highlights flexibility provided from electric transportation system to smart energy sector Discusses the high penetration level of renewable energy sources and EVs

Download or read book Rechargeable Batteries written by Rajender Boddula and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery technology is constantly changing, and the concepts and applications of these changes are rapidly becoming increasingly more important as more and more industries and individuals continue to make “greener” choices in their energy sources. As global dependence on fossil fuels slowly wanes, there is a heavier and heavier importance placed on cleaner power sources and methods for storing and transporting that power. Battery technology is a huge part of this global energy revolution. Rechargeable battery technologies have been a milestone for moving toward a fossil-fuel-free society. They include groundbreaking changes in energy storage, transportation, and electronics. Improvements in battery electrodes and electrolytes have been a remarkable development, and, in the last few years, rechargeable batteries have attracted significant interest from scientists as they are a boon for electric vehicles, laptops and computers, mobile phones, portable electronics, and grid-level electricity storage devices. Rechargeable Batteries: History, Progress, and Applicationsoutlines the history, development, future, and applications for rechargeable batteries for energy storage applications. It also provides an in-depth description of various energy storage materials and is an invaluable reference guide for electro­chemists, chemical engineers, students, faculty, and R&D professionals in energy storage science, material science, and renewable energy. This is a must-have for any engineer’s library who works with batteries and energy storage.

Download or read book Power Converter with Digital Filter Feedback Control written by Keng C. Wu and published by Academic Press. This book was released on 2016-02-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Converter with Digital Filter Feedback Control presents a logical sequence that leads to the identification, extraction, formulation, conversion, and implementation for the control function needed in electrical power equipment systems. This book builds a bridge for moving a power converter with conventional analog feedback to one with modern digital filter control and enlists the state space averaging technique to identify the core control function in analytical, close form in s-domain (Laplace). It is a useful reference for all professionals and electrical engineers engaged in electrical power equipment/systems design, integration, and management. Offers logical sequences to identification, extraction, formulation, conversion, and implementation for the control function needed Contains step-by-step instructions on how to take existing analog designed power processors and move them to the digital realm Presents ways to extract gain functions for many power converters' power processing stages and their supporting circuitry

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2011-05-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Hybrid Electric Vehicles provides vital guidance to help a new generation of engineers master the principles of and further advance hybrid vehicle technology. The authors address purely electric, hybrid electric, plug-in hybrid electric, hybrid hydraulic, fuel cell, and off-road hybrid vehicle systems. They focus on the power and propulsion systems for these vehicles, including issues related to power and energy management. They concentrate on material that is not readily available in other hybrid electric vehicle (HEV) books such as design examples for hybrid vehicles, and cover new developments in the field including electronic CVT, plug-in hybrid, and new power converters and controls. Covers hybrid vs. pure electric, HEV system architecture (including plug-in and hydraulic), off-road and other industrial utility vehicles, non-ground-vehicle applications like ships, locomotives, aircrafts, system reliability, EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Contains core fundamentals and principles of modern hybrid vehicles at component level and system level. Provides graduate students and field engineers with a text suitable for classroom teaching or self-study.

Download or read book Connected and Autonomous Vehicles in Smart Cities written by Hussein T. Mouftah and published by CRC Press. This book was released on 2020-12-17 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive coverage of the five fundamental yet intertwined pillars paving the road towards the future of connected autonomous electric vehicles and smart cities. The connectivity pillar covers all the latest advancements and various technologies on vehicle-to-everything (V2X) communications/networking and vehicular cloud computing, with special emphasis on their role towards vehicle autonomy and smart cities applications. On the other hand, the autonomy track focuses on the different efforts to improve vehicle spatiotemporal perception of its surroundings using multiple sensors and different perception technologies. Since most of CAVs are expected to run on electric power, studies on their electrification technologies, satisfaction of their charging demands, interactions with the grid, and the reliance of these components on their connectivity and autonomy, is the third pillar that this book covers. On the smart services side, the book highlights the game-changing roles CAV will play in future mobility services and intelligent transportation systems. The book also details the ground-breaking directions exploiting CAVs in broad spectrum of smart cities applications. Example of such revolutionary applications are autonomous mobility on-demand services with integration to public transit, smart homes, and buildings. The fifth and final pillar involves the illustration of security mechanisms, innovative business models, market opportunities, and societal/economic impacts resulting from the soon-to-be-deployed CAVs. This book contains an archival collection of top quality, cutting-edge and multidisciplinary research on connected autonomous electric vehicles and smart cities. The book is an authoritative reference for smart city decision makers, automotive manufacturers, utility operators, smart-mobility service providers, telecom operators, communications engineers, power engineers, vehicle charging providers, university professors, researchers, and students who would like to learn more about the advances in CAEVs connectivity, autonomy, electrification, security, and integration into smart cities and intelligent transportation systems.

Download or read book Power Electronics Drives and Advanced Applications written by Vinod Kumar and published by CRC Press. This book was released on 2020-03-27 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern for reliable power supply and energy-efficient system design has led to usage of power electronics-based systems, including efficient electric power conversion and power semiconductor devices. This book provides integration of complete fundamental theory, design, simulation and application of power electronics, and drives covering up-to-date subject components. It contains twenty-one chapters arranged in four sections on power semiconductor devices, basic power electronic converters, advanced power electronics converters, power supplies, electrical drives and advanced applications. Aimed at senior undergraduate and graduate students in electrical engineering and power electronics including related professionals, this book • Includes electrical drives such as DC motor, AC motor, special motor, high performance motor drives, solar, electrical/hybrid vehicle and fuel cell drives • Reviews advances in renewable energy technologies (wind, PV, hybrid power systems) and their integration • Explores topics like distributed generation, microgrid, and wireless power transfer system • Includes simulation examples using MATLAB®/Simulink and over four hundred solved, unsolved and review problems