Download or read book Power Converter with Digital Filter Feedback Control written by Keng C. Wu and published by Academic Press. This book was released on 2016-02-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Converter with Digital Filter Feedback Control presents a logical sequence that leads to the identification, extraction, formulation, conversion, and implementation for the control function needed in electrical power equipment systems. This book builds a bridge for moving a power converter with conventional analog feedback to one with modern digital filter control and enlists the state space averaging technique to identify the core control function in analytical, close form in s-domain (Laplace). It is a useful reference for all professionals and electrical engineers engaged in electrical power equipment/systems design, integration, and management. Offers logical sequences to identification, extraction, formulation, conversion, and implementation for the control function needed Contains step-by-step instructions on how to take existing analog designed power processors and move them to the digital realm Presents ways to extract gain functions for many power converters' power processing stages and their supporting circuitry
Download or read book Power Converters with Digital Filter Feedback Control written by Keng C. Wu and published by Academic Press. This book was released on 2016-01-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Converter with Digital Filter Feedback Control presents a logical sequence that leads to the identification, extraction, formulation, conversion, and implementation for the control function needed in electrical power equipment systems. This book builds a bridge for moving a power converter with conventional analog feedback to one with modern digital filter control and enlists the state space averaging technique to identify the core control function in analytical, close form in s-domain (Laplace). It is a useful reference for all professionals and electrical engineers engaged in electrical power equipment/systems design, integration, and management. Offers logical sequences to identification, extraction, formulation, conversion, and implementation for the control function needed Contains step-by-step instructions on how to take existing analog designed power processors and move them to the digital realm Presents ways to extract gain functions for many power converters’ power processing stages and their supporting circuitry
Download or read book Digital Control of High Frequency Switched Mode Power Converters written by Luca Corradini and published by John Wiley & Sons. This book was released on 2015-07-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the fundamental aspects of analysis, modeling and design of digital control loops around high-frequency switched-mode power converters in a systematic and rigorous manner Comprehensive treatment of digital control theory for power converters Verilog and VHDL sample codes are provided Enables readers to successfully analyze, model, design, and implement voltage, current, or multi-loop digital feedback loops around switched-mode power converters Practical examples are used throughout the book to illustrate applications of the techniques developed Matlab examples are also provided
Download or read book Power Electronic Converters Modeling and Control written by Seddik Bacha and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power electronic converters are involved in a very broad spectrum of applications: switched-mode power supplies, electrical-machine-motion-control, active power filters, distributed power generation, flexible AC transmission systems, renewable energy conversion systems and vehicular technology, among them. Power Electronics Converters Modeling and Control teaches the reader how to analyze and model the behavior of converters and so to improve their design and control. Dealing with a set of confirmed algorithms specifically developed for use with power converters, this text is in two parts: models and control methods. The first is a detailed exposition of the most usual power converter models: · switched and averaged models; · small/large-signal models; and · time/frequency models. The second focuses on three groups of control methods: · linear control approaches normally associated with power converters; · resonant controllers because of their significance in grid-connected applications; and · nonlinear control methods including feedback linearization, stabilizing, passivity-based, and variable-structure control. Extensive case-study illustration and end-of-chapter exercises reinforce the study material. Power Electronics Converters Modeling and Control addresses the needs of graduate students interested in power electronics, providing a balanced understanding of theoretical ideas coupled with pragmatic tools based on control engineering practice in the field. Academics teaching power electronics will find this an attractive course text and the practical points make the book useful for self tuition by engineers and other practitioners wishing to bring their knowledge up to date.
Download or read book Switch Mode Power Converters written by Keng C. Wu and published by Elsevier. This book was released on 2005-12-01 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switch-Mode Power Converters introduces an innovative, highly analytical approach to symbolic, closed-form solutions for switched-mode power converter circuits. This is a highly relevant topic to power electronics students and professionals who are involved in the design and analysis of electrical power converters. The author uses extensive equations to explain how solid-state switches convert electrical voltages from one level to another, so that electronic devices (e.g., audio speakers, CD players, DVD players, etc.) can use different voltages more effectively to perform their various functions. Most existing comparable books published as recently as 2002 do not discuss closed-loop operations, nor do they provide either DC closed-loop regulation equations or AC loop gain (stability) formulae. The author Wu, a leading engineer at Lockheed Martin, fills this gap and provides among the first descriptions of how error amplifiers are designed in conjunction with closed-loop bandwidth selection. BENEFIT TO THE READER: Readers will gain a mathematically rigorous introduction to numerous, closed-form solutions that are readily applicable to the design and development of various switch-mode power converters. Provides symbolic, closed-form solutions for DC and AC studies Provides techniques for expressing close-loop operation Gives readers the ability to perform closed-loop regulation and sensitivity studies Gives readers the ability to design error amplifiers with precision Employs the concept of the continuity of states in matrix form Gives accelerated time-domain, steady-state studies using Laplace transform Gives accelerated time-domain studies using state transition Extensive use of matrix, linear algebra, implicit functions, and Jacobian determinants Enables the determination of power stage gain that otherwise could not be obtained
Download or read book Control of Power Electronic Converters and Systems Volume 4 written by Frede Blaabjerg and published by Elsevier. This book was released on 2024-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume Four covers emerging topics in the control of power electronics and converters not covered in previous volumes, including emerging power converter topologies, storage systems, battery chargers and the smart transformer. This updated edition specifically focuses on emerging power converter topologies and discusses very recent advances and topics with applications in power electronics and formidable probable dynamics. Chapters include modeling of power converters and their control, with supportive simulations and additional experimental results. Anyone looking for fundamental knowledge regarding new trends in power electronics by application, and also ready to use models and methodologies in their design, control and testing will find this the next invaluable resource in this highly regarded series. Combines essential control design methods and trends with different applications of power convertor topologies Includes global perspectives, case studies and real examples from different applications and their control Features ready-to-use models and methodologies in power electronic application, their design, control and testing
Download or read book Power Electronic System Design written by Keng C. Wu and published by Elsevier. This book was released on 2021-06-18 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Processing Circuits Design seamlessly infuses important mathematical models and approaches into the optimization of power processing circuits and linear systems. The work unites a constellation of challenging mathematical topics centered on differential equations, linear algebra and implicit functions, with multiple perspectives from electrical, mathematical and physical viewpoints, including power handling components, power filtering and power regulation. Power applications covered encompass first order RC and RL, second order RLC circuits with periodic drives, constant current source, close-loop feedback practices, control loop types, linear regulator, switch-mode regulator and rotation control. Outlines the physical meaning of differential forms and integral forms in designing circuits for power applications Delivers techniques to set up linear algebraic matrix representations of complex circuits Explores key approaches obtaining steady state and describes methods using implicit functions for close-loop representation Describes how to implement vector representation of rotational driving sources Supplemented by MATLAB implementations
Download or read book Digital Control of High Frequency Switched Mode Power Converters written by Luca Corradini and published by John Wiley & Sons. This book was released on 2015-07-10 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the fundamental aspects of analysis, modeling and design of digital control loops around high-frequency switched-mode power converters in a systematic and rigorous manner Comprehensive treatment of digital control theory for power converters Verilog and VHDL sample codes are provided Enables readers to successfully analyze, model, design, and implement voltage, current, or multi-loop digital feedback loops around switched-mode power converters Practical examples are used throughout the book to illustrate applications of the techniques developed Matlab examples are also provided
Download or read book Pulse Width Modulated DC DC Power Converters written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2015-08-13 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: PWM DC-DC power converter technology underpins many energy conversion systems including renewable energy circuits, active power factor correctors, battery chargers, portable devices and LED drivers. Following the success of Pulse-Width Modulated DC-DC Power Converters this second edition has been thoroughly revised and expanded to cover the latest challenges and advances in the field. Key features of 2nd edition: Four new chapters, detailing the latest advances in power conversion, focus on: small-signal model and dynamic characteristics of the buck converter in continuous conduction mode; voltage-mode control of buck converter; small-signal model and characteristics of the boost converter in the discontinuous conduction mode and electromagnetic compatibility EMC. Provides readers with a solid understanding of the principles of operation, synthesis, analysis and design of PWM power converters and semiconductor power devices, including wide band-gap power devices (SiC and GaN). Fully revised Solutions for all end-of-chapter problems available to instructors via the book companion website. Step-by-step derivation of closed-form design equations with illustrations. Fully revised figures based on real data. With improved end-of-chapter summaries of key concepts, review questions, problems and answers, biographies and case studies, this is an essential textbook for graduate and senior undergraduate students in electrical engineering. Its superior readability and clarity of explanations also makes it a key reference for practicing engineers and research scientists.
Download or read book Dynamic Analysis of Switching Mode DC DC Converters written by Andre Kislovski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most critical part of the modern switching-mode power supply is the regulated dc/dc converter. Its dynamic behavior directly determines or influences four of the important characteristics of the power supply: • Stability of the feedback loop • Rejection of input-voltage ripple and the closely-related transient re sponse to input-voltage perturbation • Output impedance and the closely-related transient response to load perturbation • Compatibility with the input EMI filter Due to the complexity of the operation of the converter, predicting its dynamic behavior has not been easy. Without accurate prediction, and depending only on building the circuit and tinkering with it until the operation is satisfactory, the engineering cost can easily escalate and schedules can be missed. The situation is not much better when the circuit is built in the computer, using a general-purpose circuit-simulation program such as SPICE. (At the end of this book is a form for obtaining information on a computer program especially well suited for dynamic analysis of switching-mode power converters: DYANA, an acronym for "DYnamic ANAlysis. " DYANA is based on the method given in this book. ) The main goal of this book is to help the power-supply designer in the prediction of the dynamic behavior by providing user-friendly analytical tools, concrete results of already-made analyses, tabulated for easy application by the reader, and examples of how to apply the tools provided in the book.
Download or read book Switching Power Converters written by Dorin O. Neacsu and published by CRC Press. This book was released on 2017-12-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of all of the multidisciplinary aspects of medium- and high-power converter systems, including basic power electronics, digital control and hardware, sensors, analog preprocessing of signals, protection devices and fault management, and pulse-width-modulation (PWM) algorithms, Switching Power Converters: Medium and High Power, Second Edition discusses the actual use of industrial technology and its related subassemblies and components, covering facets of implementation otherwise overlooked by theoretical textbooks. The updated Second Edition contains many new figures, as well as new and/or improved chapters on: Thermal management and reliability Intelligent power modules AC/DC and DC/AC current source converters Multilevel converters Use of IPM within a "network of switches" concept Power semiconductors Matrix converters Practical aspects in building power converters Providing the latest research and development information, along with numerous examples of successful home appliance, aviation, naval, automotive electronics, industrial motor drive, and grid interface for renewable energy products, this edition highlights advancements in packaging technologies, tackles the advent of hybrid circuits able to incorporate control and power stages within the same package, and examines design for reliability from the system level perspective.
Download or read book Modeling and Control of Power Electronic Converters for Microgrid Applications written by Yang Han and published by Springer Nature. This book was released on 2021-08-27 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of power electronic converter modeling and control, digital simulation, and experimental studies in the area of renewable energy systems and AC/DC microgrid. Recent advanced control methods for voltage source inverters (VSIs) and the hierarchical controlled islanded microgrid are discussed, including the mathematical modeling, controller synthesis, parameter selection and multi-scale stability analysis, and consensus-based control strategies for the microgrid and microgrid clusters. The book will be an invaluable technical reference for practicing engineers and researchers working in the areas of renewable energy, power electronics, energy internet, and smart grid. It can also be utilized as reference book for undergraduate and postgraduate students in electrical engineering.
Download or read book Advanced Control Methodologies For Power Converter Systems written by Wensheng Luo and published by Springer Nature. This book was released on 2022-02-16 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present some advanced control methodologies for power converters. Power electronic converters have become indispensable devices for plenty of industrial applications over the last decades. Composed by controllable power switches, they can be controlled by effective strategies to achieve desirable transient response and steady-state performance, to ensure the stability, reliability and safety of the system. The most popular control strategy of power converters is the linear proportional–integral–derivative series control which is adopted as industry standard. However, when there exist parameter changes, nonlinearities and load disturbances in the system, the performance of the controller will be significantly degraded. To overcome this problem, many advanced control methodologies and techniques have been developed to improve the converter performance. This book presents the research work on some advanced control methodologies for several types of power converters, including three-phase two-level AC/DC power converter, three-phase NPC AC/DC power converter, and DC/DC buck converter. The effectiveness and advantage of the proposed control strategies are verified via simulations and experiments. The content of this book can be divided into two parts. The first part focuses on disturbance observer-based control methods for power converters under investigation. The second part investigates intelligent control methods. These methodologies provide a framework for controller design, observer design, stability and performance analysis for the considered power converter systems.
Download or read book Power Electronic Converters written by Teuvo Suntio and published by John Wiley & Sons. This book was released on 2017-12-26 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the need for a reference that explains the behavior of power electronic converters, this book provides information currently unavailable in similar texts on power electronics. Clearly organized into four parts, the first treats the dynamics and control of conventional converters, while the second part covers the dynamics and control of DC-DC converters in renewable energy applications, including an introduction to the sources as well as the design of current-fed converters applying duality-transformation methods. The third part treats the dynamics and control of three-phase rectifiers in voltage-sourced applications, and the final part looks at the dynamics and control of three-phase inverters in renewable-energy applications. With its future-oriented perspective and advanced, first-hand knowledge, this is a prime resource for researchers and practicing engineers needing a ready reference on the design and control of power electronic converters.
Download or read book Periodic Control of Power Electronic Converters written by Keliang Zhou and published by IET. This book was released on 2016-11-23 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced power electronic converters convert, control and condition electricity. Power converters require control strategies for periodic signal compensation to assure good power quality and stable power system operation. This comprehensive text presents the most recent internal model principle based periodic control technology, which offers the perfect periodic control solution for power electronic conversion. It also provides complete analysis and synthesis methods for periodic control systems, and plenty of practical examples to demonstrate the validity of proposed periodic control technology for power converters. It proposes a unified framework for housing periodic control schemes for power converters, and provides a general proportional-integral-derivative control solution to periodic signal compensation in extensive engineering applications. Periodic Control of Power Electronic Converters is intended for engineers, researchers and students in the field of power electronics who are interested in advanced control of power converters and control specialists who like to explore new applications of control theory.
Download or read book Integrated Power Electronic Converters and Digital Control written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the demand for higher efficiencies, smaller output ripple, and smaller converter size for modern power electronic systems, integrated power electronic converters could soon replace conventional switched-mode power supplies. Synthesized integrated converters and related digital control techniques address problems related to cost, space, flexibility, energy efficiency, and voltage regulation—the key factors in digital power management and implementation. Meeting the needs of professionals working in power electronics, as well as advanced engineering students, Integrated Power Electronic Converters and Digital Control explores the many benefits associated with integrated converters. This informative text details boost type, buck type, and buck-boost type integrated topologies, as well as other integrated structures. It discusses concepts behind their operation as well specific applications. Topics discussed include: Isolated DC-DC converters such as flyback, forward, push-pull, full-bridge, and half-bridge Power factor correction and its application Definition of the integrated switched-mode power supplies Steady-state analysis of the boost integrated flyback rectifier energy storage converter Dynamic analysis of the buck integrated forward converter Digital control based on the use of digital signal processors (DSPs) With innovations in digital control becoming ever more pervasive, system designers continue to introduce products that integrate digital power management and control integrated circuit solutions, both hybrid and pure digital. This detailed assessment of the latest advances in the field will help anyone working in power electronics and related industries stay ahead of the curve.
Download or read book PID and Predictive Control of Electrical Drives and Power Converters using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.