Download or read book Portable Diode Laser Diagnostic System for Collaborative Research on Air Breathing Combustion written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This equipment grant focused on four areas: (1) portable diode laser sensors with new fiber-coupled diode lasers and the support equipment to provide higher power with extended wavelength tuning range and speed; (2) agile wavelength tuning to cover a broader wavelength region; (3) new wavelength sources for the ultraviolet to expand the wavelengths available for sensor strategy research; and (4) portable data acquisition and laser control electronics.
Download or read book Laser Diagnostics for Reacting Flows written by and published by . This book was released on 2004 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research was conducted to develop advanced laser-based diagnostics for non-intrusive measurements relevant to air-breathing combustion. The program emphasized the use of spectrally-resolved absorption with cw tunable diode lasers (TDL) and the use of planar laser-induced fluorescence (PLIF) with pulsed IR and UV laser sources. Progress during the past year was highlighted by results in five areas including: progress on understanding the photophysics of toluene to enable its use as a PLlF indicator of fuel-air ratio; development and demonstration of new schemes for quantitative LIF of NO at high pressure; observation of the first UV PLIF images of carbon dioxide; fundamental measurements of IR PLIF for species with inaccessible electronic transitions; investigation of 2f wavelength-modulation techniques for temperature measurement in high-pressure and/or high-temperature gas flows, and temperature measurements via optical absorption in the UV and NIR: spectral regions targeting CO2 and H20, respectively.
Download or read book Applications of Laser Diagnostics written by and published by . This book was released on 2005 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the results of experimental and numerical investigations on gas-turbine combustion and fuel processes. The purpose of this program is the advancement of the state-of-the-art in laser diagnostics, modeling and simulations, propulsion sciences, advanced propulsion concepts, current and next-generation gas-turbine-engine components, and high-impact revolutionary technologies for airbreathing propulsion systems. The objectives of this research program include: Development, evaluation, and utilization of state-of-the-art-laser diagnostic techniques and analytical simulations and models in the study of combustion, fuel, turbine, and compressor processes that are important to current and future propulsion systems. Performance of fundamental experiments that will advance the understanding of critical combustion and fuel processes. Identification and development of the critical-technology needs of pulsed-detonation engines. Performance of advanced-cycle-aero and aerospace-propulsion-system studies that will result in high-impact revolutionary technologies. Evaluation of potential commercial applications of advanced technologies developed during the program.
Download or read book Major Research Topics in Combustion written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Computer Applications in Science and Engineer ing (ICASE) and NASA Langley Research Center (LaRC) brought together on October 2-4, 1989 experts in the various areas of com bustion with a view to expose them to some combustion problems of technological interest to LaRC and possibly foster interaction with the academic community in these research areas. The top ics chosen for this purpose were flame structure, flame stability, flame holding/extinction, chemical kinetics, turbulence-kinetics in teraction, transition to detonation, and reacting free shear layers. The lead paper set the stage by discussing the status and issues of supersonic combustion relevant to scramjet engine. Then the ex perts were called upon i) to review the current status of knowledge in the aforementioned ;:I. reas, ii) to focus on how this knowledge can be extended and applied to high-speed combustion, and iii) to suggest future directions of research in these areas. Each topic was then dealt with in a position paper followed by formal discussion papers and a general discussion involving the participants. The position papers discussed the state-of-the-art with an emphasis on key issues that needed to be resolved in the near future. The discussion papers crit ically examined these issues and filled in any lacunae therein. The edited versions of the general discussions in the form of questions from the audience and answers from the speakers are included wher ever possible to give the reader the flavor of the lively interactions that took place.
Download or read book Ground and Flight Evaluation of a Small Scale Inflatable Winged Aircraft written by and published by . This book was released on 2002 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A small-scale, instrumented research aircraft was flown to investigate the flight characteristics of inflatable wings. Ground tests measured the static structural characteristics of the wing at different inflation pressures, and these results compared favorably with analytical predictions. A research-quality instrumentation system was assembled, largely from commercial off-the-shelf components, and installed in the aircraft. Initial flight operations were conducted with a conventional rigid wing having the same dimensions as the inflatable wing. Subsequent flights were conducted with the inflatable wing. Research maneuvers were executed to identify the trim, aerodynamic performance, and longitudinal stability and control characteristics of the vehicle in its different wing configurations. For the angle-of-attack range spanned in this flight program.
Download or read book Green Electronics written by Cristian Ravariu and published by BoD – Books on Demand. This book was released on 2018-06-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Green Electronics book is intended to stimulate people's thinking toward the new concepts of an environment-friendly electronics - the main challenge in the future. The book offers multiple solutions to push the classical electronic industry toward green concepts, aided by nanotechnologies, with revolutionary features that provide low power consumption in electronics, use biomaterials for integrated structures, and include environmental monitoring tools. Based on organic semiconductors/insulators without toxic precursors, green electronic technologies launched promising devices like OLED, OTFT, or nano-core-shell transistors. The Green Electronics book successfully presents the recent directions collected worldwide and leaves free space for continuing year by year with new subtopics.
Download or read book Smart Sensors for Health and Environment Monitoring written by Chong-Min Kyung and published by Springer. This book was released on 2015-07-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers two most important applications of smart sensors, namely bio-health sensing and environmental monitoring. The approach taken is holistic and covers the complete scope of the subject matter from the principles of the sensing mechanism, through device physics, circuit and system implementation techniques, and energy issues to wireless connectivity solutions. It is written at a level suitable mainly for post-graduate level researchers interested in practical applications. The chapters are independent but complementary to each other, and the book works within the wider perspective of essential smart sensors for the Internet of Things (IoT). This is the second of three books based on the Integrated Smart Sensors research project, which describe the development of innovative devices, circuits, and system-level enabling technologies. The aim of the project was to develop common platforms on which various devices and sensors can be loaded, and to create systems offering significant improvements in information processing speed, energy usage, and size. This book contains substantial reference lists and over 150 figures, introducing the reader to the subject in a tutorial style whilst also addressing state-of-the-art research results, allowing it to be used as a guide for starting researchers.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2002 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.
Download or read book Handbook of Machine Olfaction written by Tim C. Pearce and published by John Wiley & Sons. This book was released on 2006-01-24 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electronic noses" are instruments which mimic the sense of smell. Consisting of olfactory sensors and a suitable signal processing unit, they are able to detect and distinguish odors precisely and at low cost. This makes them very useful for a remarkable variety of applications in the food and pharmaceutical industry, in environmental control or clinical diagnostics and more. The scope covers biological and technical fundamentals and up-to-date research. Contributions by renowned international scientists as well as application-oriented news from successful "e-nose" manufacturers give a well-rounded account of the topic, and this coverage from R&D to applications makes this book a must-have read for e-nose researchers, designers and users alike.
Download or read book Microgravity Combustion written by Howard D. Ross and published by Elsevier. This book was released on 2001-09-03 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to understanding combustion, the burning of a substance that produces heat and often light, in microgravity environments-i.e., environments with very low gravity such as outer space. Readers are presented with a compilation of worldwide findings from fifteen years of research and experimental tests in various low-gravity environments, including drop towers, aircraft, and space.Microgravity Combustion is unique in that no other book reviews low- gravity combustion research in such a comprehensive manner. It provides an excellent introduction for those researching in the fields of combustion, aerospace, and fluid and thermal sciences. * An introduction to the progress made in understanding combustion in a microgravity environment* Experimental, theoretical and computational findings of current combustion research* Tutorial concepts, such as scaling analysis* Worldwide microgravity research findings
Download or read book The 71F Advantage written by National Defense University Press and published by NDU Press. This book was released on 2010-09 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes a foreword by Major General David A. Rubenstein. From the editor: "71F, or "71 Foxtrot," is the AOC (area of concentration) code assigned by the U.S. Army to the specialty of Research Psychology. Qualifying as an Army research psychologist requires, first of all, a Ph.D. from a research (not clinical) intensive graduate psychology program. Due to their advanced education, research psychologists receive a direct commission as Army officers in the Medical Service Corps at the rank of captain. In terms of numbers, the 71F AOC is a small one, with only 25 to 30 officers serving in any given year. However, the 71F impact is much bigger than this small cadre suggests. Army research psychologists apply their extensive training and expertise in the science of psychology and social behavior toward understanding, preserving, and enhancing the health, well being, morale, and performance of Soldiers and military families. As is clear throughout the pages of this book, they do this in many ways and in many areas, but always with a scientific approach. This is the 71F advantage: applying the science of psychology to understand the human dimension, and developing programs, policies, and products to benefit the person in military operations. This book grew out of the April 2008 biennial conference of U.S. Army Research Psychologists, held in Bethesda, Maryland. This meeting was to be my last as Consultant to the Surgeon General for Research Psychology, and I thought it would be a good idea to publish proceedings, which had not been done before. As Consultant, I'd often wished for such a document to help explain to people what it is that Army Research Psychologists "do for a living." In addition to our core group of 71Fs, at the Bethesda 2008 meeting we had several brand-new members, and a number of distinguished retirees, the "grey-beards" of the 71F clan. Together with longtime 71F colleagues Ross Pastel and Mark Vaitkus, I also saw an unusual opportunity to capture some of the history of the Army Research Psychology specialty while providing a representative sample of current 71F research and activities. It seemed to us especially important to do this at a time when the operational demands on the Army and the total force were reaching unprecedented levels, with no sign of easing, and with the Army in turn relying more heavily on research psychology to inform its programs for protecting the health, well being, and performance of Soldiers and their families."
Download or read book The Future of Air Power in the Aftermath of the Gulf War written by Robert L. Pfaltzgraff and published by DIANE Publishing. This book was released on 1992 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of essays reflects the proceedings of a 1991 conference on "The United States Air Force: Aerospace Challenges and Missions in the 1990s," sponsored by the USAF and Tufts University. The 20 contributors comment on the pivotal role of airpower in the war with Iraq and address issues and choices facing the USAF, such as the factors that are reshaping strategies and missions, the future role and structure of airpower as an element of US power projection, and the aerospace industry's views on what the Air Force of the future will set as its acquisition priorities and strategies. The authors agree that aerospace forces will be an essential and formidable tool in US security policies into the next century. The contributors include academics, high-level military leaders, government officials, journalists, and top executives from aerospace and defense contractors.
Download or read book Weapon Systems Handbook written by and published by . This book was released on 2020-05-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: July 2019 Printed in BLACK AND WHITE The Army's Weapon Systems Handbook was updated in July 2019, but is still titled "Weapon Systems Handbook 2018." We are printing this in black and white to keep the price low. It presents many of the acquisition programs currently fielded or in development. The U.S. Army Acquisition Corps, with its 36,000 professionals, bears a unique responsibility for the oversight and systems management of the Army's acquisition lifecycle. With responsibility for hundreds of acquisition programs, civilian and military professionals collectively oversee research, development and acquisition activities totaling more than $20 billion in Fiscal Year 2016 alone. Why buy a book you can download for free? We print this so you don't have to. We at 4th Watch Publishing are former government employees, so we know how government employees actually use the standards. When a new standard is released, somebody has to print it, punch holes and put it in a 3-ring binder. While this is not a big deal for a 5 or 10-page document, many DoD documents are over 400 pages and printing a large document is a time- consuming effort. So, a person that's paid $25 an hour is spending hours simply printing out the tools needed to do the job. That's time that could be better spent doing mission. We publish these documents so you can focus on what you are there for. It's much more cost-effective to just order the latest version from Amazon.com. SDVOSB If there is a standard you would like published, let us know. Our web site is usgovpub.com
Download or read book Medical Applications of Lasers written by D.R. Vij and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A careful review of the literature covering various aspects of applications of lasers in science and technology reveals that lasers are being applied very widely throughout the entire gamut of physical medicine. After surveying the current developments taking place in the field of medical applications of lasers, it was considered appropriate to bring together these efforts of international research scientists and experts into one volume. It is with this aim that the editors have prepared this volume which brings current research and recent developments to the attention of a wide spectrum of readership associated with hospitals, medical institutions and universities world wide, including also the medical instrument industry. Both teachers and students in the medical faculties will especially find this compendium quite useful. This book is comprised of eleven chapters. All of the important medical applications of lasers are featured. The editors have made every effort that individual chapters are self-contained and written by experts. Emphasis has been placed on straight and simple presentation of the subject matter so that even the new entrants into the field will find the book of value.
Download or read book The Evolution of the Cruise Missile written by Kenneth P. Werrell and published by . This book was released on 1985 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spread Across Liquids written by and published by . This book was released on 1995 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
