Download or read book Porous Materials for Environmental Applications written by Antonio Gil and published by MDPI. This book was released on 2020-06-17 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of porous materials has attracted the attention of the research community for years. Porosity characteristics have specific impacts on the material properties and materials that are applied in many areas, such as pollutant removal, CO2 capture, energy storage, catalytic oxidation and reduction processes, the conversion of biomass to biofuels, and drug delivery. Examples of porous materials are activated carbons, clays, and zeolites. The aim of this book is to collect the recent advances and progress regarding porous materials and their applications in the environmental area.
Download or read book Porous Materials written by Juan Carlos Moreno-Piraján and published by Springer Nature. This book was released on 2021-03-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in honor of Prof. Francisco Rodriguez-Reinoso, who has made significant contributions in the area of porous materials such as active carbons and graphenes. It details the preparation of porous materials, including carbonaceous, zeolitic, and siliceous materials, MOFs, aerogels, and xerogels, describing the characterization techniques and the interpretation of the results, and highlighting common errors that can occur during the process. This book subsequently presents the use of modeling based on thermodynamics to describe the materials. Lastly, it illustrates a number of current environmental protection applications in the context of both water and air.
Download or read book Porous Materials for Environmental Applications written by Antonio Gil Bravo and published by . This book was released on 2020 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of porous materials has attracted the attention of the research community for years. Porosity characteristics have specific impacts on the material properties and materials that are applied in many areas, such as pollutant removal, CO2 capture, energy storage, catalytic oxidation and reduction processes, the conversion of biomass to biofuels, and drug delivery. Examples of porous materials are activated carbons, clays, and zeolites. The aim of this book is to collect the recent advances and progress regarding porous materials and their applications in the environmental area.
Download or read book Porous Materials written by Kozo Ishizaki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately four million years of human history has passed. We have been using materials to make a variety of tools. The first materials used were naturally occurring materials such as animal bones, stones, wood etc.; and some of these familiar materials are porous. Porous materials are so familiar that they are sometimes forgotten or ignored. The taste experience of ice cream is created not only by adjusting ingre dients, but also by including air as an ingredient, i.e. pores that give the smooth texture of ice cream. This book is designed to describe and explain about pores, the synthesis of materials with pores (porous materials), and applications of porous materi als. This book is intended for engineers and scientists of different disciplines and specialities, and is expected to be useful in the design and synthesis of porous materials for existing as well as potential new applications. Let us rediscover pores. K. Ishizaki, S. Komameni and M. Nanko January 1998 1 Introduction 1.1 WHAT ARE POROUS MATERIALS? Porous materials are dermed as solids containing pores. Figure 1.1 shows different porous materials. Generally speaking, porous materials have a porosity of 0.2-0.95. The porosity means the fraction of pore volume to the total volume. Porous materials have been used in various applications from daily necessities, such as purifying drinking water by activated carbon or porous ceramics, to uses in modern industries, for example removing dusts from high purity process gases for semiconductor production.
Download or read book Introduction to Porous Materials written by Pascal Van Der Voort and published by John Wiley & Sons. This book was released on 2019-06-11 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive textbook on the timely and rapidly developing topic of inorganic porous materials This is the first textbook to completely cover a broad range of inorganic porous materials. It introduces the reader to the development of functional porous inorganic materials, from the synthetic zeolites in the 50’s, to today’s hybrid materials such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and related networks. It also provides the necessary background to understand how porous materials are organized, characterized, and applied in adsorption, catalysis, and many other domains. Additionally, the book explains characterization and application from the materials scientist viewpoint, giving the reader a practical approach on the characterization and application of the respective materials. Introduction to Inorganic Porous Materials begins by describing the basic concepts of porosity and the different types of pores, surfaces, and amorphous versus crystalline materials, before introducing readers to nature’s porous materials. It then goes on to cover everything from adsorption and catalysis to amorphous materials such as silica to inorganic carbons and Periodic Mesoporous Organosilicas (PMOs). It discusses the synthesis and applications of MOFs and the broad family of COFs. It concludes with a look at future prospects and emerging trends in the field. The only complete book of its kind to cover the wide variety of inorganic and hybrid porous materials A comprehensive reference and outstanding tool for any course on inorganic porous materials, heterogeneous catalysis, and adsorption Gives students and investigators the opportunity to learn about porous materials, how to characterize them, and understand how they can be applied in different fields Introduction to Inorganic Porous Materials is an excellent book for students and professionals of inorganic chemistry and materials science with an interest in porous materials, functional inorganic materials, heterogeneous catalysis and adsorption, and solid state characterization techniques.
Download or read book Porous Materials written by Juan Carlos Moreno-Piraján and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in honor of Prof. Francisco Rodriguez-Reinoso, who has made significant contributions in the area of porous materials such as active carbons and graphenes. It details the preparation of porous materials, including carbonaceous, zeolitic, and siliceous materials, MOFs, aerogels, and xerogels, describing the characterization techniques and the interpretation of the results, and highlighting common errors that can occur during the process. This book subsequently presents the use of modeling based on thermodynamics to describe the materials. Lastly, it illustrates a number of current environmental protection applications in the context of both water and air.
Download or read book Porous Polymer Science and Applications written by Inamuddin and published by CRC Press. This book was released on 2022-05-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Polymer Science and Applications aims to provide recent developments and advances in synthesis, tuning parameters, and applications of porous polymers. This book brings together reviews written by highly accomplished panels of experts working in the area of porous polymers. It encompasses basic studies and addresses topics of novel issues concerning the applications of porous polymers. Chapter topics span basic studies, novel issues, and applications addressing all aspects in a one-stop reference on porous polymers. Applications discussed include catalysis, gas storage, energy and environmental sectors making this an invaluable guide for students, professors, scientists and R&D industrial experts working in the field of material science and engineering and particularly energy conversion and storage. Additional features include: Provides a comprehensive introduction to porous polymers addressing design, synthesis, structure, properties and characterization. Covers task-specific applications of porous polymers. Explores the advantages and opportunities of these materials for most major fields of science and engineering. Outlines novel research areas and potential development and expansion areas.
Download or read book Porous Materials for Carbon Dioxide Capture written by An-Hui Lu and published by Springer Science & Business. This book was released on 2014-04-17 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored book provides a comprehensive overview of the latest developments in porous CO2 capture materials, including ionic liquid–derived carbonaceous adsorbents, porous carbons, metal-organic frameworks, porous aromatic frameworks, micro porous organic polymers. It also reviews the sorption techniques such as cyclic uptake and desorption reactions and membrane separations. In each category, the design and fabrication, the comprehensive characterization, the evaluation of CO2 sorption/separation and the sorption/degradation mechanism are highlighted. In addition, the advantages and remaining challenges as well as future perspectives for each porous material are covered. This book is aimed at scientists and graduate students in such fields as separation, carbon, polymer, chemistry, material science and technology, who will use and appreciate this information source in their research. Other specialists may consult specific chapters to find the latest, authoritative reviews. Dr. An-Hui Lu is a Professor at the State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Faculty of Chemical, Environmental and Biological Science and Technology, Dalian University of Technology, China. Dr. Sheng Dai is a Corporate Fellow and Group Leader in the Chemical Sciences Division at Oak Ridge National Laboratory (ORNL) and a Professor of Chemistry at the University of Tennessee, USA.
Download or read book Handbook Of Porous Materials Synthesis Properties Modeling And Key Applications In 4 Volumes written by and published by World Scientific. This book was released on 2020-10-20 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume handbook gives a state-of-the-art overview of porous materials, from synthesis and characterization and simulation all the way to manufacturing and industrial applications. The editors, coming from academia and industry, are known for their didactic skills as well as their technical expertise. Coordinating the efforts of 37 expert authors in 14 chapters, they construct the story of porous carbons, ceramics, zeolites and polymers from varied viewpoints: surface and colloidal science, materials science, chemical engineering, and energy engineering. Volumes 1 and 2 cover the fundamentals of preparation, characterisation, and simulation of porous materials. Working from the fundamentals all the way to the practicalities of industrial production processes, the subjects include hierarchical materials, in situ and operando characterisation using NMR, X-Ray scattering and tomography, state-of-the-art molecular simulations of adsorption and diffusion in crystalline nanoporous materials, as well as the emerging areas of bio-artificing and drug delivery. Volume 3 focuses on porous materials in industrial separation applications, including adsorption separation, membrane separation, and osmotic distillation. Finally, and highly relevant to tomorrow's energy challenges, Volume 4 explains the energy engineering aspects of applying porous materials in supercapacitors, fuel cells, batteries, electrolysers and sub-surface energy applications.The text contains many high-quality colourful illustrations and examples, as well as thousands of up-to-date references to peer-reviewed articles, reports and websites for further reading. This comprehensive and well-written handbook is a must-have reference for universities, research groups and companies working with porous materials.Related Link(s)
Download or read book Novel Advanced Porous Materials for Environmental Absorption Applications written by Charlene Charese VanLeuven and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Relationship of Novel Porous Materials for Energy and Environmental Applications written by and published by . This book was released on 2014 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Applications of Nanomaterials written by Glen E. Fryxell and published by World Scientific. This book was released on 2007 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with functional nanomaterials: materials containing specific, predictable nanostructure whose chemical composition or interfacial structure enable them to perform a specific job ? destroy, sequester or detect some material that constitutes an environmental threat. Nanomaterials have a number of features that make them ideally suited for this job: high surface area, high reactivity, easy dispersability, and rapid diffusion. The purpose of this book is to showcase how these features can be tailored to address some of the environmental remediation and sensing/detection problems faced today. The leading researchers contributing to this volume paint a picture of diverse synthetic strategies, structures, materials and methods. The book is organized into sections on nanoparticle-based remediation strategies, nanostructured inorganic materials (such as layered materials like the apatites), nanostructured organic/inorganic hybrid materials, and the use of nanomaterials to enhance the performance of sensors. The chemistries captured by the contributors form a rich and colorful tapestry.
Download or read book Structural Properties of Porous Materials and Powders Used in Different Fields of Science and Technology written by Yury Mironovich Volfkovich and published by Springer. This book was released on 2014-07-22 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and concise description of most important aspects of experimental and theoretical investigations of porous materials and powders, with the use and application of these materials in different fields of science, technology, national economy and environment. It allows the reader to understand the basic regularities of heat and mass transfer and adsorption occurring in qualitatively different porous materials and products, and allows the reader to optimize the functional properties of porous and powdered products and materials. Written in an straightforward and transparent manner, this book is accessible to both experts and those without specialist knowledge, and it is further elucidated by drawings, schemes and photographs. Porous materials and powders with different pore sizes are used in many areas of industry, geology, agriculture and science. These areas include (i) a variety of devices and supplies; (ii) thermal insulation and building materials; (iii) oil-bearing geological, gas-bearing and water-bearing rocks; and (iv) biological objects. Structural Properties of Porous Materials and Powders Used in Different Fields of Science and Technology is intended for a wide-ranging audience specializing in different fields of science and engineering including engineers, geologists, geophysicists, oil and gas producers, agronomists, physiologists, pharmacists, researchers, teachers and students.
Download or read book Porous Materials written by Peisheng Liu and published by Elsevier. This book was released on 2014-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers and scientists alike will find this book to be an excellent introduction to the topic of porous materials, in particular the three main groups of porous materials: porous metals, porous ceramics, and polymer foams. Beginning with a general introduction to porous materials, the next six chapters focus on the processing and applications of each of the three main materials groups. The book includes such new processes as gel-casting and freeze-drying for porous ceramics and self-propagating high temperature synthesis (SHS) for porous metals. The applications discussed are relevant to a wide number of fields and industries, including aerospace, energy, transportation, construction, electronics, biomedical and others. The book concludes with a chapter on characterization methods for some basic parameters of porous materials. Porous Materials: Processing and Applications is an excellent resource for academic and industrial researchers in porous materials, as well as for upper-level undergraduate and graduate students in materials science and engineering, physics, chemistry, mechanics, metallurgy, and related specialties. A comprehensive overview of processing and applications of porous materials – provides younger researchers, engineers and students with the best introduction to this class of materials Includes three full chapters on modern applications - one for each of the three main groups of porous materials Introduces readers to several characterization methods for porous materials, including methods for characterizing pore size, thermal conductivity, electrical resistivity and specific surface area
Download or read book Two Dimensional Materials for Environmental Applications written by Neeraj Kumar and published by Springer Nature. This book was released on 2023-04-28 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent developments in the field of two-dimensional nanomaterials for environmental applications. Due to their high surface area and tunable surface chemistry, two-dimensional nanomaterials are currently garnering great interest for environmental remediation applications. This book compiles contributed chapters from active international researchers dealing with the development of state-of-the-art two-dimensional nanomaterials in environmental applications such as water and wastewater treatment, adsorption, photocatalysis, membrane separation, desalination, deionization, environmental pollutants sensing/detection, carbon-dioxide capture and catalytic conversion, microbial treatment, and electrochemical remediation. Each chapter provides an essential and comprehensive overview of the recent advances in material development and application, giving special attention to preparation methods, tunning of physiochemical properties, surface and interface chemistry, structural porosity, assemblies integration for fabrication of devices, and their relationship with overall efficiency. It offers a valuable reference guide for environmental and materials scientists, engineers, and policymakers working towards environmental sustainability.
Download or read book Metal Organic Frameworks MOFs for Environmental Applications written by Sujit K. Ghosh and published by Elsevier. This book was released on 2019-06-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Organic Frameworks for Environmental Applications examines this important topic, looking at potential materials and methods for the remediation of pressing pollution issues, such as heavy-metal contaminants in water streams, radioactive waste disposal, marine oil-spillage, the treatment of textile and dye industry effluents, the clean-up of trace amounts of explosives in land and water, and many other topics. This survey of the cutting-edge research and technology of MOFs is an invaluable resource for researchers working in inorganic chemistry and materials science, but it is also ideal for graduate students studying MOFs and their applications. Examines the applications of metal-organic frameworks for the remediation of environmental pollutants Features leading experts who research the applications of MOFs from around the world, including contributions from the United States, India and China Explores possible solutions to some of today’s most pressing environmental challenges, such as heavy-metal contamination in bodies of water, oil spills and clean-up of explosives hidden in land and water Provides an excellent reference for researchers and graduate students studying in the areas of inorganic chemistry, materials chemistry and environmental science
Download or read book Industrial and Technological Applications of Transport in Porous Materials written by J.M.P.Q. Delgado and published by Springer Science & Business Media. This book was released on 2013-08-17 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book, Industrial and Technological Applications of Transport in Porous Materials, is to provide a collection of recent contributions in the field of heat and mass transfer in porous media and their industrial and technological applications. The main benefit of the book is that it discusses some of the most important topics related to transport phenomenon in engineering and their future applications. It includes a set of new technological applications in the field of heat and mass transfer phenomena in a porous medium domain, such as, drying technology, filtration, infrared thermography, energy, recycling, etc. At the same time, these topics will be going to the encounter of a variety of scientific and engineering disciplines, such as chemical, civil, agricultural, mechanical engineering, etc. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.
