Download or read book Poroelastic Structures written by G. Cederbaum and published by Elsevier. This book was released on 2000-07-12 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poroelasticity is a continuum theory for the analysis of a porous media consisting of an elastic matrix containing interconnected fluid-saturated pores. In physical terms the theory postulates that when a porous material is subjected to stress, the resulting matrix deformation leads to volumetric changes in the pores. This book is devoted to the analysis of fluid-saturated poroelastic beams, columns and plates made of materials for which diffusion in the longitudinal direction(s) is viable, while in the perpendicular direction(s) the flow can be considered negligible because of the micro-geometry of the solid skeletal material. Many microstructures and fabrication schemes could be imagined, which would produce bulk materials with the postulated behavior. The book provides a methodology and a theoretical basis for investigating the mechanical behaviors of the structural elements made of such materials. It is recognized that the response of the poroelastic structural element to loading is sensitive to the properties of the fluid and to the diffusion boundaries, which can be easily altered in practice. Therefore, such structural elements and thus their features are potentially controllable. In other words, it could be possible to convert such elements into intelligent or smart structures. If this is so, it would be interesting that such structural elements could work as both sensors and actuators, e.g. the fluid can "feel" the change of the temperature by changing its viscosity and this results in a change of the behavior of the structure. The present book is the first of its kind; there does not exist in the professional literature any book which deals with this subject.Chapter 1 is a general introduction and overview. The governing equations for beams are presented in Chapter 2. Chapter 3 then presents analytical solutions for the quasi-static bending problem. Series solutions are found for normal loading with various mechanical and diffusion boundary conditions. The finite element method is developed and employed for the quasi-static beams and columns with small deflections in Chapter 4. In Chapter 5 solutions are found for free and forced vibrations of poroelastic beams. Chapter 6 deals with large deflections of beams. The stability of poroelastic columns is investigated in Chapter 7. Three problems are considered: buckling, post-buckling, and dynamic stability. Formulations are found in Chapter 8 for fluid-saturated poroelastic plates consisting of a material, for which the diffusion is possible in the in-plane directions only, both for bending and for in-plane loading. This book attempts to constitute a reasonably self-contained presentation of a wide spectrum of problems related to the analysis of the type of poroelastic structure considered.

Download or read book Acoustic Waves in Periodic Structures Metamaterials and Porous Media written by Noé Jiménez and published by Springer Nature. This book was released on 2021-11-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a comprehensive and up-to-date treatment of practical applications of metamaterials, structured media, and conventional porous materials. With increasing levels of urbanization, a growing demand for motorized transport, and inefficient urban planning, environmental noise exposure is rapidly becoming a pressing societal and health concern. Phononic and sonic crystals, acoustic metamaterials, and metasurfaces can revolutionize noise and vibration control and, in many cases, replace traditional porous materials for these applications. In this collection of contributed chapters, a group of international researchers reviews the essentials of acoustic wave propagation in metamaterials and porous absorbers with viscothermal losses, as well as the most recent advances in the design of acoustic metamaterial absorbers. The book features a detailed theoretical introduction describing commonly used modelling techniques such as plane wave expansion, multiple scattering theory, and the transfer matrix method. The following chapters give a detailed consideration of acoustic wave propagation in viscothermal fluids and porous media, and the extension of this theory to non-local models for fluid saturated metamaterials, along with a description of the relevant numerical methods. Finally, the book reviews a range of practical industrial applications, making it especially attractive as a white book targeted at the building, automotive, and aeronautic industries.

Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.

Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 2223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials).

Download or read book Mechanics of Poroelastic Media written by A.P.S. Selvadurai and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Mechanics of Poroelastic Media the classical theory of poroelasticity developed by Biot is developed and extended to the study of problems in geomechanics, biomechanics, environmental mechanics and materials science. The contributions are grouped into sections covering constitutive modelling, analytical aspects, numerical modelling, and applications to problems. The applications of the classical theory of poroelasticity to a wider class of problems will be of particular interest. The text is a standard reference for researchers interested in developing mathematical models of poroelasticity in geoenvironmental mechanics, and in the application of advanced theories of poroelastic biomaterials to the mechanics of biomaterials.

Download or read book Wave Propagation in Viscoelastic and Poroelastic Continua written by Martin Schanz and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation is an important topic in engineering sciences, especially, in the field of solid mechanics. A description of wave propagation phenomena is given by Graff [98]: The effect of a sharply applied, localized disturbance in a medium soon transmits or 'spreads' to other parts of the medium. These effects are familiar to everyone, e.g., transmission of sound in air, the spreading of ripples on a pond of water, or the transmission of radio waves. From all wave types in nature, here, attention is focused only on waves in solids. Thus, solely mechanical disturbances in contrast to electro-magnetic or acoustic disturbances are considered. of waves - the compression wave similar to the In solids, there are two types pressure wave in fluids and, additionally, the shear wave. Due to continual reflec tions at boundaries and propagation of waves in bounded solids after some time a steady state is reached. Depending on the influence of the inertia terms, this state is governed by a static or dynamic equilibrium in frequency domain. However, if the rate of onset of the load is high compared to the time needed to reach this steady state, wave propagation phenomena have to be considered.

Download or read book Generalized Models and Non classical Approaches in Complex Materials 1 written by Holm Altenbach and published by Springer. This book was released on 2018-03-24 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of 2 special volumes dedicated to the memory of Gérard Maugin. Including 40 papers that reflect his vast field of scientific activity, the contributions discuss non-standard methods (generalized model) to demonstrate the wide range of subjects that were covered by this exceptional scientific leader. The topics range from micromechanical basics to engineering applications, focusing on new models and applications of well-known models to new problems. They include micro–macro aspects, computational endeavors, options for identifying constitutive equations, and old problems with incorrect or non-satisfying solutions based on the classical continua assumptions.

Download or read book New Insights in Stability Structure and Properties of Porous Materials written by Annalisa Martucci and published by MDPI. This book was released on 2018-07-04 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "New Insights in Stability, Structure and Properties of Porous Materials" that was published in Minerals

Download or read book Poro Elastic Theory with Applications to Transport in Porous Media written by Dong-Sheng Jeng and published by CRC Press. This book was released on 2023-04-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats the subject of porous flow and its applications in three engineering and scientific problems. The first major part of the book is devoted to solute transport in unsaturated porous media. Dynamic hydraulic conductivity and degree of saturation associate with pore pressures are also included in the consolidation-induced solute transport process. The second part of this book focuses on tidal dynamics in coastal aquifers, including shallow water expansion for sloping beaches, two-dimensional problem in estuarine zone and leaky confined aquifers. The final part of the book summarizes the recent development of porous model in the field of liquefaction around marine infrastructures including fundamental mechanisms of momentary and residual seabed liquefaction, two-dimensional and three-dimensional porous models for fluid-seabed interactions around breakwaters, pipelines and piled foundations in marine environments. The authors’ aim is to describe in detail the applications of porous models for several engineering problems. This book will provide academic researchers and industry an overview of recent development in the field of porous models and the applications. The Open Access version of this book, available at http://www.taylorfrancis.com, has been made available under a Creative Commons Non Commercial-No Derivatives (CC-BY-NC-ND) 4.0 license. Funded by Qingdao University Technology, China

Download or read book Advanced Functional Materials written by Nevin Tasaltin and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written by authors in the field of preparation of advanced functional materials and their wide-ranging applications. The topics in the book include: preparation of several advanced functional materials, and their applications in sensors, health, concrete, textile, glasses, and pharmacy. In this book, the authors focused on recent studies, applications, and new technological developments in fundamental properties of advanced functional materials.

Download or read book Propagation of Sound in Porous Media written by Jean Allard and published by John Wiley & Sons. This book was released on 2009-10-27 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The first edition of this book is considered the bible of this topic... Suffice it to say that there is no other published treatise that approaches the depth of treatment offered by this book. The coverage is the state of the published art, while the added contents cover the new known developments in the field." Haisam Osman; Technology Development Manager, United Launch Alliance This long-awaited second edition of a respected text from world leaders in the field of acoustic materials covers the state of the art with a depth of treatment unrivalled elsewhere. Allard and Atalla employ a logical and progressive approach that leads to a thorough understanding of porous material modelling. The first edition of Propagation of Sound in Porous Media introduced the basic theory of acoustics and the related techniques. Research and development in sound absorption has however progressed significantly since the first edition, and the models and methods described, at the time highly technical and specialized, have since become main stream. In this second edition, several original topics have been revisited and practical prediction methods and industrial applications have been added that increase the breadth of its appeal to both academics and practising engineers. New chapters have also been added on numerical modeling in both low (finite element) and high frequency (Transfer Matrix Method). Collating ‘must-have’ information for engineers working in sound and vibration, Propagation of Sound in Porous Media, 2nd edition offers an indisputable reference to a diverse audience; including graduate students and academics in mechanical & civil engineering, acoustics and noise control, as well as practising mechanical, chemical and materials engineers in the automotive, rail, aerospace, building and civil industries.

Download or read book Fluid Structure Interaction and Biomedical Applications written by Tomáš Bodnár and published by Springer. This book was released on 2014-10-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents, in a methodical way, updated and comprehensive descriptions and analyses of some of the most relevant problems in the context of fluid-structure interaction (FSI). Generally speaking, FSI is among the most popular and intriguing problems in applied sciences and includes industrial as well as biological applications. Various fundamental aspects of FSI are addressed from different perspectives, with a focus on biomedical applications. More specifically, the book presents a mathematical analysis of basic questions like the well-posedness of the relevant initial and boundary value problems, as well as the modeling and the numerical simulation of a number of fundamental phenomena related to human biology. These latter research topics include blood flow in arteries and veins, blood coagulation and speech modeling. We believe that the variety of the topics discussed, along with the different approaches used to address and solve the corresponding problems, will help readers to develop a more holistic view of the latest findings on the subject, and of the relevant open questions. For the same reason we expect the book to become a trusted companion for researchers from diverse disciplines, such as mathematics, physics, mathematical biology, bioengineering and medicine.

Download or read book Proceedings Of Coastal Dynamics 2009 Impacts Of Human Activities On Dynamic Coastal Processes With Cd rom written by Masaru Mizuguchi and published by World Scientific. This book was released on 2009-08-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coastal Dynamics 2009 is the sixth conference in a sequence of technical speciality conferences bringing together field and laboratory experimentalists, theoreticians and modelers conducting research on the dynamics of the coastal systems. The multidisciplinary Coastal Dynamics 2009 will be of interest to coastal engineers, coastal geologists, oceanographers, and related scientists. It is also of relevance to coastal specialists and managers, and to those interested in preserving coastal zones. In Coastal Dynamics 2009, special emphasis will be placed on the impacts of human activity on dynamic coastal processes.

Download or read book Structural Geology written by Haakon Fossen and published by Cambridge University Press. This book was released on 2016-03-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This market-leading textbook has been fully updated in response to extensive user feedback. It includes a new chapter on joints and veins, additional examples from around the world, stunning new field photos, and extended online resources with new animations and exercises. The book's practical emphasis, hugely popular in the first edition, features applications in the upper crust, including petroleum and groundwater geology, highlighting the importance of structural geology in exploration and exploitation of petroleum and water resources. Carefully designed full-colour illustrations work closely with the text to support student learning, and are supplemented with high-quality photos from around the world. Examples and parallels drawn from practical everyday situations engage students, and end-of chapter review questions help them to check their understanding. Updated e-learning modules are available online (www.cambridge.org/fossen2e) and further reinforce key topics using summaries, innovative animations to bring concepts to life, and additional examples and figures.

Download or read book Porous Media written by Wolfgang Ehlers and published by Springer Science & Business Media. This book was released on 2002-07-09 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume offers a state-of-the-art report on the various recent sci entific developments in the Theory of Porous Media (TPM) comprehending the basic theoretical concepts in continuum mechanics on porous and mul tiphasic materials as well as the wide range of experimental and numerical applications. Following this, the volume does not only address the sophisti cated reader but also the interested beginner in the area of Porous Media by presenting a collection of articles. These articles written by experts in the field concern the fundamental approaches to multiphasic and porous materials as well as various applications to engineering problems. In many branches of engineering just as in applied natural sciences like bio- and chemomechanics, one often has to deal with continuum mechanical problems which cannot be uniquely classified within the well-known disci plines of either "solid mechanics" or "fluid mechanics". These problems, characterized by the fact that they require a unified treatment of volumetri cally coupled solid-fluid aggregates; basically fall into the categories of either mixtures or porous media. Following this, there is a broad variety of problems ranging in this category as for example the investigation of reacting fluid mix tures or solid-fluid suspensions as well as the investigation of the coupled solid deformation and pore-fluid flow behaviour of liquid- and gas-saturated porous solid skeleton materials like geomaterials (soil, rock, concrete, etc. ), polymeric and metallic foams or biomaterials (hard and soft tissues, etc).

Download or read book High Performance Computing in Science and Engineering 07 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the Stuttgart High Performance Computing Center in 2007. The reports cover all fields of computational science and engineering, with emphasis on industrially relevant applications. Presenting results for both vector-based and microprocessor-based systems, the book allows comparison between performance levels and usability of various architectures.

Download or read book Interfaces in Medicine and Mechanics 2 written by K.R. Williams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Interfaces Conference was held at Swansea in April 1988 and represented the then state of the art of the science of implant surgery. The motivation for the initial venture was a supposed need for a closer interaction and dialogue between the clinician and scientist working in this area. As expressed in the Preface to the first Conference, we felt that the interface was represented graphically, scientifically and psychologically by the drawings of Edgar Rubins (1915), again widely used in the literature to the present Proceedings. The first Conference, we believe, achieved the aims of the organisers in bringing together scientists and clinicians towards an exchange of ideas by logically pursuing the sequence of events in clinical implant surgery. The present Conference, in collaboration with our Italian colleagues, has also attempted to achieve the same aims by examining the behaviour of implants constructed of a variety of materials in both hard and soft tissue. Many contributions in the conference employed the technique of finite element analysis, both for design and optimisation purposes, particularly in relation to bone remodelling. Indeed, this particular aspect of the Conference led to much debate and will require a major examination of the many levels of physical, chemical and biomechanical interactive behaviour of the implant and its environment. All this natural behaviour was presented and discussed, but difficulties and failures remain with such procedures and we feel it is only by continuing such meetings that we progress in this difficult area of clinical science.