Download or read book Porous Media written by F. A.L. Dullien and published by Academic Press. This book was released on 2012-12-02 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the relationship between transport properties and pore structure of porous material. Models of pore structure are presented with a discussion of how such models can be used to predict the transport properties of porous media. Portions of the book are devoted to interpretations of experimental results in this area and directions for future research. Practical applications are given where applicable, and are expected to be useful for a large number of different fields, including reservoir engineering, geology, hydrogeology, soil science, chemical process engineering, biomedical engineering, fuel technology, hydrometallurgy, nuclear reactor technology, and materials science. - Presents mechanisms of immiscible and miscible displacement (hydrodynamic dispersion) process in porous media - Examines relationships between pore structure and fluid transport - Considers approaches to enhanced oil recovery - Explores network modeling and perolation theory

Download or read book Non Destructive Assessment of Concrete Structures Reliability and Limits of Single and Combined Techniques written by Denys Breysse and published by Springer Science & Business Media. This book was released on 2012-01-21 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.

Download or read book Engineered Carbon Nanotubes and Nanofibrous Material written by A. K. Haghi and published by CRC Press. This book was released on 2018-10-16 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary engineering properties, have garnered much attention in the past 10 years. Because of the broad range of potential applications, the scientific community is more motivated than ever to move beyond basic properties and explore the real issues associated with carbon nanotube-based applications. Presenting up-to-date literature that presents the current state of the science, this book, Engineered Carbon Nanotubes and Nanofibrous Material: Integrating Theory and Technique, fully explores the development phase of carbon nanotube-based applications. It looks at carbon nanotubes and their applications in diverse areas of science and engineering and considers environmental engineering applications as well. This volume is a valuable resource for engineers, scientists, researchers, and professionals in a wide range of disciplines whose focus remains on the power and promise of carbon nanotubes.

Download or read book Manufacturing Control of Textile Materials written by Valerii Zdorenko and published by Springer Nature. This book was released on 2023-02-17 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines issues of improving the efficiency of the control technological parameters of textile materials through with computerized systems with the application of non-contact methods as only they allow to react quickly to changes of technological parameters during production. The original models, algorithms, software and hardware of the developed system for the control technological parameters of textile materials are presented. Also, the book presents new methods for measuring the technological parameters of textile materials, which do not need require taking into account the constant readjustment of the system to controlled samples of materials with different structure and porosity. The developed model of the computerized system allows contactless control of basis weight and porosity of fabrics in the course of their production. This book contains six chapters, for researchers, engineers, as well as lecturers and postgraduates of higher education institutions dealing with ultrasonic control engineering equipment.

Download or read book Structural Health Monitoring SHM of Civil Structures written by Gangbing Song and published by MDPI. This book was released on 2018-04-20 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Structural Health Monitoring (SHM) of Civil Structures" that was published in Applied Sciences

Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPE ANTEC 1999 Proceedings written by Spe and published by CRC Press. This book was released on 1999-04-29 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the conference proceedings of the SPE/Antac on 'Plastics Bridging the Millennia- subtopic of 'Materials', held on the 2-6 May 1999 in New York City, USA.

Download or read book Methods for Research on Soilborne Phytopathogenic Fungi written by Larry L. Singleton and published by American Phytopathological Society. This book was released on 1992 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most dependable current techniques for the study of soilborne phytopathogenic fungi. Section one presents an overview of general techniques as well as new molecular methods. Section two contains 30 chapters devoted to specific genera (or groups of genera), including information on identification, host range and distribution, isolation, isolate maintenance and storage, and inoculum production and pathogenicity determination. Section three contains basic information on subjects such as soil physical properties, soil temperature, soil moisture, and soil atmosphere. Spiral binding. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Report 31 Advanced Testing of Cement Based Materials during Setting and Hardening Report of RILEM Technical Committee 185 ATC written by Hans W. Reinhardt and published by RILEM Publications. This book was released on 2005 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Electrocardiology written by Peter W. Macfarlane and published by Springer Science & Business Media. This book was released on 2010-11-05 with total page 2310 pages. Available in PDF, EPUB and Kindle. Book excerpt: New edition of the classic complete reference book for cardiologists and trainee cardiologists on the theory and practice of electrocardiography, one of the key modalities used for evaluating cardiology patients and deciding on appropriate management strategies.

Download or read book Impedance Spectroscopy written by Evgenij Barsoukov and published by John Wiley & Sons. This book was released on 2018-05-01 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Essential Reference for the Field, Featuring Protocols, Analysis, Fundamentals, and the Latest Advances Impedance Spectroscopy: Theory, Experiment, and Applications provides a comprehensive reference for graduate students, researchers, and engineers working in electrochemistry, physical chemistry, and physics. Covering both fundamentals concepts and practical applications, this unique reference provides a level of understanding that allows immediate use of impedance spectroscopy methods. Step-by-step experiment protocols with analysis guidance lend immediate relevance to general principles, while extensive figures and equations aid in the understanding of complex concepts. Detailed discussion includes the best measurement methods and identifying sources of error, and theoretical considerations for modeling, equivalent circuits, and equations in the complex domain are provided for most subjects under investigation. Written by a team of expert contributors, this book provides a clear understanding of impedance spectroscopy in general as well as the essential skills needed to use it in specific applications. Extensively updated to reflect the field’s latest advances, this new Third Edition: Incorporates the latest research, and provides coverage of new areas in which impedance spectroscopy is gaining importance Discusses the application of impedance spectroscopy to viscoelastic rubbery materials and biological systems Explores impedance spectroscopy applications in electrochemistry, semiconductors, solid electrolytes, corrosion, solid state devices, and electrochemical power sources Examines both the theoretical and practical aspects, and discusses when impedance spectroscopy is and is not the appropriate solution to an analysis problem Researchers and engineers will find value in the immediate practicality, while students will appreciate the hands-on approach to impedance spectroscopy methods. Retaining the reputation it has gained over years as a primary reference, Impedance Spectroscopy: Theory, Experiment, and Applications once again present a comprehensive reference reflecting the current state of the field.

Download or read book Crystalline Silicon written by Sukumar Basu and published by BoD – Books on Demand. This book was released on 2011-07-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exciting world of crystalline silicon is the source of the spectacular advancement of discrete electronic devices and solar cells. The exploitation of ever changing properties of crystalline silicon with dimensional transformation may indicate more innovative silicon based technologies in near future. For example, the discovery of nanocrystalline silicon has largely overcome the obstacles of using silicon as optoelectronic material. The further research and development is necessary to find out the treasures hidden within this material. The book presents different forms of silicon material, their preparation and properties. The modern techniques to study the surface and interface defect states, dislocations, and so on, in different crystalline forms have been highlighted in this book. This book presents basic and applied aspects of different crystalline forms of silicon in wide range of information from materials to devices.

Download or read book Introduction to Advanced Food Process Engineering written by Jatindra Kumar Sahu and published by CRC Press. This book was released on 2014-03-24 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food materials are processed prior to their consumption using different processing technologies that improve their shelf life and maintain their physicochemical, biological, and sensory qualities. Introduction to Advanced Food Process Engineering provides a general reference on various aspects of processing, packaging, storage, and quality control and assessment systems, describing the basic principles and major applications of emerging food processing technologies. The book is divided into three sections, systematically examining processes from different areas of food process engineering. Section I covers a wide range of advanced food processing technologies including osmo-concentration of fruits and vegetables, membrane technology, nonthermal processing, emerging drying technologies, CA and MA storage of fruits and vegetables, nanotechnology in food processing, and computational fluid dynamics modeling in food processing. Section II describes food safety and various non-destructive quality assessment systems using machine vision systems, vibrational spectroscopy, biosensors, and chemosensors. Section III explores waste management, by-product utilization, and energy conservation in food processing industry. With an emphasis on novel food processes, each chapter contains case studies and examples to illustrate state-of-the-art applications of the technologies discussed.

Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrochemical Impedance Spectroscopy written by Mark E. Orazem and published by John Wiley & Sons. This book was released on 2011-10-13 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using electrochemical impedance spectroscopy in a broad range of applications This book provides the background and training suitable for application of impedance spectroscopy to varied applications, such as corrosion, biomedical devices, semiconductors and solid-state devices, sensors, batteries, fuel cells, electrochemical capacitors, dielectric measurements, coatings, electrochromic materials, analytical chemistry, and imaging. The emphasis is on generally applicable fundamentals rather than on detailed treatment of applications. With numerous illustrative examples showing how these principles are applied to common impedance problems, Electrochemical Impedance Spectroscopy is ideal either for course study or for independent self-study, covering: Essential background, including complex variables, differential equations, statistics, electrical circuits, electrochemistry, and instrumentation Experimental techniques, including methods used to measure impedance and other transfer functions Process models, demonstrating how deterministic models of impedance response can be developed from physical and kinetic descriptions Interpretation strategies, describing methods of interpretating of impedance data, ranging from graphical methods to complex nonlinear regression Error structure, providing a conceptual understanding of stochastic, bias, and fitting errors in frequency-domain measurements An overview that provides a philosophy for electrochemical impedance spectroscopy that integrates experimental observation, model development, and error analysis This is an excellent textbook for graduate students in electrochemistry, materials science, and chemical engineering. It's also a great self-study guide and reference for scientists and engineers who work with electrochemistry, corrosion, and electrochemical technology, including those in the biomedical field, and for users and vendors of impedance-measuring instrumentation.

Download or read book Handbook of Anthropometry written by Victor R. Preedy and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although its underlying concept is a relatively simple one—the measurement of the human body and its parts—anthropometry employs a myriad of methods and instruments, and is useful for a variety of purposes, from understanding the impact of disease on individuals to tracking changes in populations over time. The first interdisciplinary reference on the subject, the Handbook of Anthropometry brings this wide-ranging field together: basic theory and highly specialized topics in normal and abnormal anthropometry in terms of health, disease prevention, and intervention. Over 140 self-contained chapters cover up-to-date indices, the latest studies on computerized methods, shape-capturing systems, and bioelectrical impedance, data concerning single tissues and whole-body variables, and reports from different areas of the world. Chapters feature helpful charts and illustrations, cross-references to related chapters are included, and key points are presented in bullet form for ease of comprehension. Together, the Handbook’s thirteen sections entail all major aspects of anthropometrical practice and research, including: Tools and techniques. Developmental stages, from fetus to elder. Genetic diseases, metabolic diseases, and cancer. Exercise and nutrition. Ethnic, cultural, and geographic populations. Special conditions and circumstances. The Handbook of Anthropometry is an invaluable addition to the reference libraries of a broad spectrum of health professionals, among them health scientists, physicians, physiologists, nutritionists, dieticians, nurses, public health researchers, epidemiologists, exercise physiologists, and physical therapists. It is also useful to college-level students and faculty in the health disciplines, as well as to policymakers and ergonomists.

Download or read book Batteries and Supercapacitors Aging written by Pascal Venet and published by MDPI. This book was released on 2020-04-15 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical energy storage is a key element of systems in a wide range of sectors, such as electro-mobility, portable devices, and renewable energy. The energy storage systems (ESSs) considered here are batteries, supercapacitors, and hybrid components such as lithium-ion capacitors. The durability of ESSs determines the total cost of ownership, the global impacts (lifecycle) on a large portion of these applications and, thus, their viability. Understanding ESS aging is a key to optimizing their design and usability in terms of their intended applications. Knowledge of ESS aging is also essential to improve their dependability (reliability, availability, maintainability, and safety). This Special Issue includes 12 research papers and 1 review article focusing on battery, supercapacitor, and hybrid capacitor aging.