Download or read book Porcine Meat written by United Nations. Economic Commission for Europe. Working Party on Agricultural Quality Standards and published by United Nations Publications. This book was released on 2008 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of UNECE Standards for meat products is to facilitate trade by recommending an international language for use between buyer and seller. The language describes meat items commonly traded internationally and defines a coding system for communication and electronic trade. This Standard recommends an international language for raw (unprocessed) carcases and cuts marketed as fit for human consumption. It provides purchasers with a variety of options for meat handling, packing and conformity assessment that conform to good commercial practice for meat and meat products intended to be sold in international trade.
Download or read book Pig Tales An Omnivore s Quest for Sustainable Meat written by Barry Estabrook and published by W. W. Norton & Company. This book was released on 2015-05-04 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Splendid Table Staff Book Pick of the Year "Estabrook, a reporter of iron constitution and persistence, has dug deep into the truth about the American pork industry without losing his sense of humor and humanity." —Christopher Kimball, Wall Street Journal In Pig Tales, New York Times best-selling author of Tomatoland Barry Estabrook turns his attention to the dark side of the American pork industry. Drawing on personal experiences raising pigs as well as sharp investigative instincts, Estabrook covers the range of the human-porcine experience. He shows how these intelligent creatures are all too often subjected to lives of suffering in confinement and squalor, sustained on a drug-laced diet just long enough to reach slaughter weight. But Estabrook also reveals how it is possible to raise pigs responsibly and respectfully, benefiting producers and consumers—as well as some of the top chefs in America. Provocative, witty, and deeply informed, Pig Tales is bound to spark conversation at dinner tables across America.
Download or read book Porcine Inspection written by Andy Grist and published by . This book was released on 2007 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth in the highly acclaimed series of Meat Inspection Handbooks. The full colour photographs make this another invaluable tool for all those for whom knowledge of porcine anatomy, diseases and other conditions is required, including veterinary surgeons and meat inspectors within the abattoir, and also producers who will be receiving condemnation data from these establishments.
Download or read book Pork written by Paulo E.S. Munekata and published by CRC Press. This book was released on 2021-09-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of pork is a common technological practice that modifies the taste, flavor, texture and color of raw pork meat. Due to pork’s accessible price and versatility, the manufacture of pork products to offer a variety of options to consumers is an important strategy of the meat industries in this sector to improve profits and expand into new markets at the local, regional and international levels. The diversity of pork products reflects the diversity and history of many local cultures around the world, as well as a growing interest in preserving traditional processing practices. Pork: Meat Quality and Processed Meat Products delves into the various kinds of pork and the methods used to prepare it for consumption, including fresh meat products, fermented sausages, dry-cured products, blood sausages and cooked sausages. Each category starts with a specific raw material (entire cut vs. minced pork meat) to which is added a unique combination of ingredients (e.g., sodium chloride, starter cultures, blood, seasoning and spices). The method of processing (such as salting, drying, thermal processing and fermenting) takes consumer tastes and storage needs into account, as well as how each product will be consumed (cooked, sliced, spread and as an ingredient in other dishes, for instance). Consequently, a wide range of products made from pork are currently being produced worldwide. Added to this is the increasing importance of ingredients and health factors to consumers; the resulting demand for products that address specific health concerns is having a significant impact on research into and the production of pork meat products. Key Features: Comprehensively presents and discusses the wealth of information about pork products Includes specific details about the processing, quality of final products and innovation in the industry Presents innovative, health-oriented approaches to making traditional and commercial pork products Discusses healthier pork meat products that address consumer trends and government recommendations The production of health-oriented pork products is an emerging and promising investigation area with a direct impact on the currect market for meat products.
Download or read book Evaluation and Control of Meat Quality in Pigs written by P.V. Tarrant and published by Springer Science & Business Media. This book was released on 1987-02-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'This book is well organized and extremely informative ' The Cornell Veterinarian, Oct. 1987
Download or read book Quality and Grading of Carcasses of Meat Animals written by S. Morgan Jones and published by CRC Press. This book was released on 2020-07-24 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three main factors affect the quality and composition of meat in farm animals. Production conditions determine the composition of the meat, while marketing and postmortem periods have a major bearing on the visual appearance and ultimate eating experience for the consumer. It is often difficult to compare research results from different countries since meat quality is assessed by a wide variety of procedures. Quality and Grading of Carcasses of Meat Animals reviews the development of commercial grading or classification schemes on a world-wide basis, and it provides a broad outline of the most common subjective and objective procedures for the assessment of meat quality. The book provides reviews on: Ante- and post-mortem effects on meat quality Reducing fatness in meat animals Prediction of carcass composition and meat quality World carcass and grading systems Electronic identification of animals
Download or read book Applied Muscle Biology and Meat Science written by Ph.D., Min Du and published by CRC Press. This book was released on 2009-05-26 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of muscle biology is continuing to expand in the animal and food sciences industry, especially the understanding of the mechanisms that control skeletal muscle development, growth, and their impacts on meat production and quality. Applied Muscle Biology and Meat Science provides agriculturalists with state-of-the-art information and a platform to further explore this specialized topic. It also gives novices a comprehensive knowledge base in applied muscle biology and meat science. Many existing problems in meat science and production are due to a lack of understanding of the underlying biological mechanisms of the livestock. Careful to avoid gory processing details, the text focuses on biological changes and the appropriate manage
Download or read book Meat Processing written by Joseph P. Kerry and published by Elsevier. This book was released on 2002-09-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meat is both a major food in its own right and a staple ingredient in many food products. With its distinguished editors and an international team of contributors, Meat processing reviews research on what defines and determines meat quality, and how it can be maintained or improved during processing.Part one considers the various aspects of meat quality. There are chapters on what determines the quality of raw meat, changing views of the nutritional quality of meat and the factors determining such quality attributes as colour and flavour. Part two discusses how these aspects of quality are measured, beginning with the identification of appropriate quality indicators. It also includes chapters on both sensory analysis and instrumental methods including on-line monitoring and microbiological analysis. Part three reviews the range of processing techniques that have been deployed at various stages in the supply chain. Chapters include the use of modelling techniques to improve quality and productivity in beef cattle production, new decontamination techniques after slaughter, automation of carcass processing, high pressure processing of meat, developments in modified atmosphere packaging and chilling and freezing. There are also chapters on particular products such as restructured meat and fermented meat products.With its detailed and comprehensive coverage of what defines and determines meat quality, Meat processing is a standard reference for all those involved in the meat industry and meat research. - Reviews research on what defines and determines meat quality, and how it can be measured, maintained and improved during processing - Examines the range of processing techniques that have been deployed at various stages in the supply chain - Comprehensively outlines the new decontamination techniques after slaughter and automation of carcass processing
Download or read book Handbook of Meat Poultry and Seafood Quality written by Leo M. L. Nollet and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great need exists for valuable information on factors affecting the quality of animal related products. The second edition of Handbook of Meat, Poultry and Seafood Quality, focuses exclusively on quality aspects of products of animal origin, in depth discussions and recent developments in beef, pork, poultry, and seafood quality, updated sensory evaluation of different meat products, revised microbiological aspects of different meat products. Also, included are new chapters on packaging, new chapters and discussion of fresh and frozen products, new aspects of shelf life and recent developments in research of meat tainting. This second edition is a single source for up-to-date and key information on all aspects of quality parameters of muscle foods is a must have. The reader will have at hand in one focused volume covering key information on muscle foods quality.
Download or read book Pork written by Paulo E.S. Munekata and published by CRC Press. This book was released on 2021-09-02 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of pork is a common technological practice that modifies the taste, flavor, texture and color of raw pork meat. Due to pork’s accessible price and versatility, the manufacture of pork products to offer a variety of options to consumers is an important strategy of the meat industries in this sector to improve profits and expand into new markets at the local, regional and international levels. The diversity of pork products reflects the diversity and history of many local cultures around the world, as well as a growing interest in preserving traditional processing practices. Pork: Meat Quality and Processed Meat Products delves into the various kinds of pork and the methods used to prepare it for consumption, including fresh meat products, fermented sausages, dry-cured products, blood sausages and cooked sausages. Each category starts with a specific raw material (entire cut vs. minced pork meat) to which is added a unique combination of ingredients (e.g., sodium chloride, starter cultures, blood, seasoning and spices). The method of processing (such as salting, drying, thermal processing and fermenting) takes consumer tastes and storage needs into account, as well as how each product will be consumed (cooked, sliced, spread and as an ingredient in other dishes, for instance). Consequently, a wide range of products made from pork are currently being produced worldwide. Added to this is the increasing importance of ingredients and health factors to consumers; the resulting demand for products that address specific health concerns is having a significant impact on research into and the production of pork meat products. Key Features: Comprehensively presents and discusses the wealth of information about pork products Includes specific details about the processing, quality of final products and innovation in the industry Presents innovative, health-oriented approaches to making traditional and commercial pork products Discusses healthier pork meat products that address consumer trends and government recommendations The production of health-oriented pork products is an emerging and promising investigation area with a direct impact on the currect market for meat products.
Download or read book Current Advances in Meat Nutritional Sensory and Physical Quality Improvement written by Mohammed Gagaoua and published by MDPI. This book was released on 2020-04-24 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the idea and objective of bringing together original studies dealing with the continuum aspects of meat, i.e., from farm to fork, this book grouped papers on the study of the nutritional, sensory, and technological aspects of carcass, muscle, meat, and meat-product qualities. This nook highlights a great part of the research activities in the field of meat science. A total of 14 original studies and one comprehensive review were edited within five main topics: (i) production systems and rearing practices, (ii) prediction of meat quality, (iii) statistical approaches for meat quality prediction/management, (iv) muscle biochemistry and proteomics techniques, and (v) consumer acceptability, development, and characterization of meat products.
Download or read book Handbook of Fermented Meat and Poultry written by Fidel Toldrá and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: An internationally respected editorial team and array of chapter contributors has developed the Handbook of Fermented Meat and Poultry, an updated and comprehensive hands-on reference book on the science and technology of processing fermented meat and poultry products. Beginning with the principles of processing fermented meat and ending with discussions of product quality, safety, and consumer acceptance, the book takes three approaches: background and principles; product categories; and product quality and safety. The historical background on the fermentation of meat and poultry products is followed by a series of discussions on their science and technology: curing, fermentation, drying and smoking, basic ingredients (raw product, additives, spices, and casings), and starter cultures. Coverage of product categories details the science and technology of making various fermented meat and poultry products from different parts of the world, including: semidry-fermented sausages (summer sausage), dry-fermented sausages (salami), sausages from other meats, and ripened meat products (ham). Product quality and safety is probably the most important aspect of making fermented meat and poultry because it addresses the question of consumer acceptance and public health safety. While a processor may produce a wonderful sausage, the product must ultimately satisfy the consumer in terms of color, texture, taste, flavor, packaging, and so on. In the current political and social climate, food safety has a high priority. Coverage includes issues such as spoilage microorganisms, pathogens, amines, toxins, HACCP and disease outbreaks.
Download or read book Processed Meats written by Joseph P. Kerry and published by Elsevier. This book was released on 2011-07-14 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a market in which consumers demand nutritionally-balanced meat products, producing processed meats that fulfil their requirements and are safe to eat is not a simple task. Processed meats: Improving safety, nutrition and quality provides professionals with a wide-ranging guide to the market for processed meats, product development, ingredient options and processing technologies. Part one explores consumer demands and trends, legislative issues, key aspects of food safety and the use of sensory science in product development, among other issues. Part two examines the role of ingredients, including blood by-products, hydrocolloids, and natural antimicrobials, as well as the formulation of products with reduced levels of salt and fat. Nutraceutical ingredients are also covered. Part three discusses meat products' processing, taking in the role of packaging and refrigeration alongside emerging areas such as high pressure processing and novel thermal technologies. Chapters on quality assessment and the quality of particular types of products are also included. With its distinguished editors and team of expert contributors, Processed meats: Improving safety, nutrition and quality is a valuable reference tool for professionals working in the processed meat industry and academics studying processed meats. - Provides professionals with a wide-ranging guide to the market for processed meats, product development, ingredient options, processing technologies and quality assessment - Outlines the key issues in producing processed meat products that are nutritionally balanced, contain fewer ingredients, have excellent sensory characteristics and are safe to eat - Discusses the use of nutraceutical ingredients in processed meat products and their effects on product quality, safety and acceptability
Download or read book Handbook of Meat and Meat Processing Second Edition written by Y. H. Hui and published by CRC Press. This book was released on 2012-01-11 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retitled to reflect expansion of coverage from the first edition, Handbook of Meat and Meat Processing, Second Edition, contains a complete update of materials and nearly twice the number of chapters. Divided into seven parts, the book covers the entire range of issues related to meat and meat processing, from nutrients to techniques for preservation and extending shelf life. Topics discussed include: An overview of the meat-processing industry The basic science of meat, with chapters on muscle biology, meat consumption, and chemistry Meat attributes and characteristics, including color, flavor, quality assessment, analysis, texture, and control of microbial contamination The primary processing of meat, including slaughter, carcass evaluation, and kosher laws Principles and applications in the secondary processing of meat, including breading, curing, fermenting, smoking, and marinating The manufacture of processed meat products such as sausage and ham The safety of meat products and meat workers, including sanitation issues and hazard analysis Drawn from the combined efforts of nearly 100 experts from 16 countries, the book has been carefully vetted to ensure technical accuracy for each topic. This definitive guide to meat and meat products it is a critical tool for all food industry professionals and regulatory personnel.
Download or read book Pork Slaughtering Cutting Preserving and Cooking on the Farm written by H. Russell Cross and published by . This book was released on 1978 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Technologies for Meat Processing written by Fidel Toldrá and published by CRC Press. This book was released on 2017-10-10 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the first edition, the main goal of Advanced Technologies for Meat Processing is to provide the reader with recent developments in new advanced technologies for the full meat- processing chain. This book is written by distinguished international contributors with recognized expertise and excellent reputations, and brings together all the advances in a wide and varied number of technologies that are applied in different stages of meat processing. This second edition contains 21 chapters, combining updated and revised versions of several chapters with entirely new chapters that deal with new online monitoring techniques like hyperspectral imaging and Raman spectroscopy, the use of nanotechnology for sensor devices or new packaging materials and the application of omics technologies like nutrigenomics and proteomics for meat quality and nutrition. The book starts with the control and traceability of genetically modified farm animals, followed by four chapters reporting the use of online non-destructive monitoring techniques like hyperspectral imaging and Raman spectroscopy, real-time PCR for pathogens detection, and nanotechnology-based sensors. Then, five chapters describe different advanced technologies for meat decontamination, such as irradiation, hydrostatic and hydrodynamic pressure processing, other non-thermal technologies, and the reduction in contaminants generation. Nutrigenomics in animal nutrition and production is the object of a chapter that is followed by five chapters dealing with nutritional-related issues like bioactive peptides, functional meats, fat and salt reduction, processing of nitrite-free products, and the use of proteomics for the improved processing of dry-cured meats. The last four chapters are reporting the latest developments in bacteriocins against meat-borne pathogens, the functionality of bacterial starters, modified atmosphere packaging and the use of new nanotechnology-based materials for intelligent and edible packaging.
Download or read book Whittemore s Science and Practice of Pig Production written by Colin T. Whittemore and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and practice of pig production has changed rapidly overrecent decades; new husbandry practices, new understandings ofgrowth, reproduction and health, new appreciations of welfare andenvironmental impact, new nutritional approaches, and modernreproductive and genetic techniques have all come into being,together with the emergence of new health challenges. Now in its third edition, this long established reference bookon the management, breeding, feeding, nutrition, health and welfareof pigs has been fully revised to provide clear and currentinformation on both the practical and scientific aspects of the pigindustry. With the help of a new panel of international experts anda senior editor, the overall structure now contains input frominternational centres across Europe and North America. This edition includes: Updated versions of existing chapters; Completely revised and new sections on: Pig meat and carcassquality, Reproduction, The maintenance of health, Nutritional valueof protein and amino acids in feed stuffs, Value of fats and oilsin pig diets, Product marketing, Environmental management,Simulation modelling; Input from international authorities; Many tables, diagrams, photographs and figures.
