Download or read book Polymers and Polymeric Materials for Fiber and Gradient Optics written by L. Nadareishvili and published by CRC Press. This book was released on 2023-01-06 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers general aspects of the theory of polymers applied in optics. The main factors affecting the light loss in polymeric wave beam guides (PG) are discussed, and the mechanism of light loss in PG is analysed. Polymers applied in fiber optics are classified with reference to methods of fabrication and purification of the materials. Technological aspects of material fabrication are considered together with kinetic aspects of polymerisation. Updated information on polymerisation kinetics of MMA and styrene, and copolymerisation of these monomers with each other is reported. Other topics discussed in the book are heterogeneity of optic copolymers, association between structure and reactivity of monomers, other properties of optic copolymers, and areas of their commercial application. This volume will be of value and interest to anyone working in the field of optic polymers, both in academia and industry.
Download or read book Polymers and Polymeric Materials for Fiber and Gradient Optics written by L. I. Nadareishvili and published by VSP. This book was released on 2002-01-01 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers general aspects of the theory of polymers applied in optics. The main factors affecting the light loss in polymeric wave beam guides (PG) are discussed, and the mechanism of light loss in PG is analysed. Polymers applied in fiber optics are classified with reference to methods of fabrication and purification of the materials. Technological aspects of material fabrication are considered together with kinetic aspects of polymerisation. Updated information on polymerisation kinetics of MMA and styrene, and copolymerisation of these monomers with each other is reported. Other topics discussed in the book are heterogeneity of optic copolymers, association between structure and reactivity of monomers, other properties of optic copolymers, and areas of their commercial application. This volume will be of value and interest to anyone working in the field of optic polymers, both in academia and industry.
Download or read book New Trends in Natural and Synthetic Polymer Science written by Cornelia Vasile and published by Nova Publishers. This book was released on 2006 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of texts written by well-recognised specialists was constituted having in view these important directions of actual research. Sustainable economical growth requires safe resources of raw materials for the industrial production. Today's most frequently used industrial raw material, petroleum, is neither sustainable, because limited, nor environmentally friendly. While the economy of energy can be based on various alter-native raw materials, such as wind, sun, water, biomass, as well as nuclear fission and fusion, the economy of substances is fundamentally depending on biomass, in particular biomass of plants. In the last decades because of the crude oil and other natural resources crisis, a new alternative has been proposed consisting in utilisation of renewable natural resources as feedstock and fuel, among which the biomass is the most promising.
Download or read book Handbook of Optical Fibers written by Gang-Ding Peng and published by Springer. This book was released on 2019-08-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research- and application-oriented book covers main topical areas of optical fibers. The selection of the chapters is weighted on technological and application-specific topics, very much a reflection of where research is heading to and what researchers are looking for. Chapters are arranged in a user-friendly format essentially self-contained and with extensive cross-references. They are organized in the following sections: - Optical Fiber Communication | Editors: Ming-Jun Li and Chao Lu - Solitons and Nonlinear Waves in Optical Fibers | Editor: Boris A. Malomed - Optical Fiber Fabrication | Editor: Hairul Azhar Bin Abdul Rashid - Active Optical Fibers | Editor: Kyunghwan Oh - Special Optical Fibers | Editors: Perry Shum and Zhilin Xu - Optical Fiber Measurement | Editor: Jianzhong Zhang - Optical Fiber Devices | Editors: John Canning and Tuan Guo - Optical Fiber Device Measurement | Editor: Yanhua Luo - Distributed Optical Fiber Sensing | Editor: Yosuke Mizuno - Optical Fiber Sensors for Industrial Applications | Editor: Tong Sun OBE - Polymer Optical Fiber Sensing | Editor: Ginu Rajan - Photonic Crystal Fiber Sensing | Editor: D. N. Wang - Optical Fiber Microfluidic Sensors | Editor: Yuan Gong
Download or read book Polymers and Polymeric Materials for Fiber and Gradient Optics written by L. Nadareishvili and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers general aspects of the theory of polymers applied in optics. The main factors affecting the light loss in polymeric wave beam guides (PG) are discussed, and the mechanism of light loss in PG is analysed. Polymers applied in fiber optics are classified with reference to methods of fabrication and purification of the materials. Technological aspects of material fabrication are considered together with kinetic aspects of polymerisation. Updated information on polymerisation kinetics of MMA and styrene, and copolymerisation of these monomers with each other is reported. Other topics discussed in the book are heterogeneity of optic copolymers, association between structure and reactivity of monomers, other properties of optic copolymers, and areas of their commercial application. This volume will be of value and interest to anyone working in the field of optic polymers, both in academia and industry.
Download or read book Polymers and Polymeric Materials for Fiber and Gradient Optics written by L. Nadareishvili and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers general aspects of the theory of polymers applied in optics. The main factors affecting the light loss in polymeric wave beam guides (PG) are discussed, and the mechanism of light loss in PG is analysed. Polymers applied in fiber optics are classified with reference to methods of fabrication and purification of the materials. Technological aspects of material fabrication are considered together with kinetic aspects of polymerisation. Updated information on polymerisation kinetics of MMA and styrene, and copolymerisation of these monomers with each other is reported. Other topics discussed in the book are heterogeneity of optic copolymers, association between structure and reactivity of monomers, other properties of optic copolymers, and areas of their commercial application. This volume will be of value and interest to anyone working in the field of optic polymers, both in academia and industry.
Download or read book Photodegradation and Light Stabilization of Heterochain Polymers written by Niyazi and published by CRC Press. This book was released on 2006-11-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photodegradation and light stabilization are very important aspects of polymer aging. Polymer degradation includes different types of processes: thermodegradation, oxidation, acting of ozone, photodegradation, radiation, hydrolysis, mechanical degradation, and biodegradation. It is very important to know the mechanism of polymer degradation in orde
Download or read book Thermal Stability of Engineering Heterochain Thermoresistant Polymers written by Kalugina and published by CRC Press. This book was released on 2004-08-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents investigation results of thermal transformations in thermoresistant polymers: polysulfones, polyester-imides, aliphatic-aromatic polyimides and polyamides, liquid-crystal aromatic co-polyesters, polyphenylquinoxalines at temperatures of materials and articles processing and operation. An important result of investigations is the determination of thermooxidative degradation regularities for aliphatic-aromatic heterochain polymers and description of the degradation mechanism. The applied aspect of this work is the approach to stabilization of thermoresistant polymers and composite materials derived from them using additives and analysis of the mechanism of high-temperature inhibited oxidation. The book presents results which have been obtained through many years of research until recently, mostly obtained by scientists of G.S. Petrov Research Institute of Polymeric Materials (Moscow, Russia) – one of the leading Institutes in this branch - which have not been available in international scientific publications before.
Download or read book Polymer Fiber Optics written by Mark G. Kuzyk and published by CRC Press. This book was released on 2018-10-03 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This straightforward text examines the scientific principles, characterization techniques, and fabrication methods used to design and produce high quality optical fibers. Polymer Fiber Optics: Materials, Physics, and Applications focuses on the fundamental concepts that will continue to play a role in future research and applications. This book documents the underlying physics of polymer fibers, particularly aspects of light interaction, and details the practical considerations for a broad range of characterization techniques used to investigate new phenomena. The book presents basic fabrication techniques and protocols that will likely remain useful as new advances address specific processing challenges. The author presents a fresh approach to standard derivations, using numerous figures and diagrams to break down complex concepts and illustrate theoretical calculations. The final chapters draw attention to the latest directions in research and novel applications, including photomechanical actuation, electro-optic fibers, and smart materials.
Download or read book The Concept of Micellar Sponge Nanophases in Chemical Physics of Polymers written by Yuri Arsenovich Mikheev and published by CRC Press. This book was released on 2004-04-01 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph is intended for elucidation of the novel trend in chemical physics regarding the polymer non-crystalline phase. It stresses the physical phenomena affecting the kinetics and mechanism of chemical reactions proceeding in the non-crystalline polymer matrix (NCPM). NCPM is depicted in terms of a supramolecular (carcass-micellar) model. The model is thought to reflect heterophase packing of polymeric chains, which co-operate as a molecular-chain sponge. The NCPM model presented is proved for adequate description of principal structure-physical phenomena to elaborate the scheme of structural-kinetic modeling of chemical reactions in bulky polymers. Structure-physical phenomena elucidated in the monograph are: - peculiarities of polymer plasticization and polymer blending with liquids; - structural and thermodynamic aspects of sorption of low molecular species; - properties of ESR (spin) probes and optical (molecular) probes; - features of water absorbed by polymers; - mechanical and thermal effects generated by the molecular-chain sponge; - supramolecular aspects of NCPM chemical physics. This monograph includes the structural-kinetic modeling of complex polymer chemical reactions. It deals with the problem of mechanism and kinetics of free radical chain reactions using thermal and photochemical model reactions of dibenzoyl peroxide with glassy-like polymers (cellulose triacetate, polycarbonate, polystyrene, polyamide PA-548), viscoelastic polymers (atactic polypropylene, polyamide PA-548, polyethylene, polyisobutylene, melted poly(ethylene oxide), and isotactic polypropylene. In all cases, the supramolecular heterophase mechanism of the processes, which was unknown for homogeneous systems, was proved. Furthermore, heterophase mechanisms of photochemical reaction between naphthalene and cellulose triacetate and photolysis of poly(methyl methacrylate) proceeding as a photochain reaction are indicated.
Download or read book CRC Handbook of Laser Science and Technology Supplement 2 written by Marvin J. Weber and published by CRC Press. This book was released on 2020-09-23 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the CRC Handbook of Laser Science and Technology: Supplement 2, experts summarize the discovery and properties of new optical materials that have appeared since the publication of Volumes III-V. Included are the latest advances in optical crystals, glasses and plastics, laser host materials, phase conjugation materials, linear electrooptic materials, nonlinear optical materials, magnetooptic materials, elastooptic materials, photorefractive materials, liquid crystals, and thin film coatings. The book also includes expanded coverage of optical waveguide materials and new sections on optical liquids, glass fiber lasers, diamond optics, and gradient index materials. Appendices include Designation of Russian Optical Glasses; Abbreviations, Acronyms, and Mineralogical or Common Names for Optical Materials; and Abbreviations for Methods of Preparing Optical Materials. Extensive tabulations of materials properties with references to the primary literature are provided throughout the supplement. The CRC Handbook of Laser Science and Technology: Supplement 2 represents the latest volume in the most comprehensive, up-to-date listing of the properties of optical materials for lasers and laser systems, making it an essential reference work for all scientists and engineers working in laser research and development.
Download or read book Chemical and Physical Properties of Polymers written by Gennadiĭ Efremovich Zaikov and published by Nova Publishers. This book was released on 2005 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title's contents include: perspective polymer materials with structural inhomogeneity for the construction of new generation optical devices; the effect of various factors on damaging of polymeric materials by microorganisms; kinetics of radial growth of aspergillus colonies at different temperatures; kinetics of acids excretion in medium by mycelial micromycetes colonies; polymers for fibre optics; isobutylene polymerisation.
Download or read book Low Temperature Behaviour of Elastomers written by Bukhina and published by CRC Press. This book was released on 2007-11-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the effect the composition of rubbers and the conditions of their processing have on low-temperature resistance. It considers the nature and development of two physical processes, glass transition and crystallization, determining low-temperature behavior of elastomers. The book addresses the effects of deformation, pressure, an
Download or read book Elementorganic Monomers Technology Properties Applications written by Khananashvili and published by CRC Press. This book was released on 2006-06-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: New fields of science and technology call for new materials with valuable performance characteristics. Long-term resistance to such temperatures can be found only in polymers with chains made up of thermostable fragments. Particularly interesting in this respect are elementorganic polymers with inorganic and organo-inorganic molecular chains. Eleme
Download or read book Polymeric Biomaterials written by M. I. Shtilman and published by VSP. This book was released on 2003-07-28 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers and polymer-based composites possess a wide spectrum of properties, which allow them to be used in a diverse range of medical applications. This volume in the book series New Concepts in Polymer Science deals with the application features of polymeric implants, their interaction with surrounding living tissues, the demands imposed upon the objects implanted and polymeric materials used for their manufacture, and the main types of polymers applied and their properties.Chapters 1-8 are devoted to various polymer applications in medical and biological fields; chapters 9-10 consider individual polymeric materials used in this field.This monograph is designed for use as a textbook for specializations in chemical and technological courses in universities, as well as a methodical manual and directory for scientists and researchers in both academia and industry.
Download or read book Fire Resistant and Thermally Stable Materials Derived from Chlorinated Polyethylene written by Gennady Zaikov and published by CRC Press. This book was released on 2023-01-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume in the book series New Concepts in Polymer Science focuses on the problem of creating materials with reduced combustibility as well as the use of polymeric materials for protection from fire or overheating. The majority of polymeric materials are combustible, which has led to the development of polymers, and materials based on these, with reduced combustibility. However the combustibility degree or their ability to protect from fire or high temperature can be indicated only in particular cases of combustion. In this volume the results of the development of physicochemical bases for creating organic polymeric materials with reduced combustibility, which are capable of protecting against high temperatures are discussed. A presentation of chlorinated polyolefins as organic polymers with reduced combustibility is also given.
Download or read book Biodegradation and Durability of Materials under the Effect of Microorganisms written by Gennady Zaikov and published by CRC Press. This book was released on 2014-07-11 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the book series New Concepts in Polymer Science deals with the damaging effects, which microorganisms such as bacteria, fungi, etc. can have on a range of materials in machinery. The book aims to provide theoretical notions about the mechanisms of material damaging by microorganisms under operation conditions as well as to give recom
