Download or read book Polymers and Additives in Extreme Environments written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMERS AND ADDITVES IN EXTREME ENVIRONMENTS Uniquely catalogs polymers and additives for uses in extreme applications such as in high or low pressure, high or low temperature, deep water and other special applications. The book includes chapters on aqueous environments including polymeric membranes for water purification and wastewater treatment; extreme pressure environments such as oils and lubricants for combustion engines as well as materials used for deep drilling such as surfactants, scale inhibitors, foaming agents, defoamers, propellants, fracturing fluids; extreme temperatures is subdivided in high and low temperature applications including gasketing materials, fuel tank sealants, expulsion bladders, fuel cell materials, and on the other hand, cold weather articles and thermoregulatory textiles; electrical applications include solar cell devices, triboelectric generators, fuel cell applications, electrochromic materials and batteries; medical applications include polymers for contact lenses, materials for tissue engineering, sophisticated drug delivery systems; aerospace applications include outer space applications such as low temperature and pressure, also cosmic rays, outgassing, and atomic erosion, as well as materials for electrostactic dissipative coatings and space suits; a final chapter detailing materials that are used in other extreme environments, such as adhesives, and polymeric concrete materials. Audience Materials and polymer scientists working in manufacturing and plastics, civil and mechanical engineers in various industries such as automotive, aircraft, space, marine and shipping, electronics, construction, electrical, etc. will find this book essential. The book will also serve the needs of engineers and specialists who have only a passing contact with polymers and additives in industrial setting need to know more.
Download or read book Handbook for the Chemical Analysis of Plastic and Polymer Additives written by Michael Bolgar and published by CRC Press. This book was released on 2015-09-25 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Adhesives Sealants and Coatings for Space and Harsh Environments written by Lieng-Huang Lee and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies constantly generate new demands for exotic materials to be used in severe environments. The rapid developments of aerospace industries during the last two decades have required new materials to survive extreme high and low temperatures and various radiations. The exploration of new energy sources, e.g., solar and geothermal, has led us to develop new solar collectors and geothermal devices. Even the search for new oils has demanded that we study the corrosive environment of oil fields. In the telecommunication industries, optical fibers have been adopted broadly to replace metallic conductors. However, none of the optical fibers can survive abrasion or corrosion without the application of a coating material. For microelectronics, protection in terms of coatings and encapsulants is deemed necessary to prevent corrosion. One of the major causes of corrosion has been shown to be water which appears to be abundant in our earthly environments. Water can attack the bulk adhesive (or sealant), the interface, or the adherend. Water can also cause delamination of coating film, and it is definitely the major ingredient in causing cathodic or anodic corrosion. Thus, water becomes the major obstacle in solving durability problems of various materials in harsh environments.
Download or read book Polymers in Defence and Aerospace Applications written by and published by iSmithers Rapra Publishing. This book was released on 2007-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymers and Additives in Extreme Environments written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMERS AND ADDITVES IN EXTREME ENVIRONMENTS Uniquely catalogs polymers and additives for uses in extreme applications such as in high or low pressure, high or low temperature, deep water and other special applications. The book includes chapters on aqueous environments including polymeric membranes for water purification and wastewater treatment; extreme pressure environments such as oils and lubricants for combustion engines as well as materials used for deep drilling such as surfactants, scale inhibitors, foaming agents, defoamers, propellants, fracturing fluids; extreme temperatures is subdivided in high and low temperature applications including gasketing materials, fuel tank sealants, expulsion bladders, fuel cell materials, and on the other hand, cold weather articles and thermoregulatory textiles; electrical applications include solar cell devices, triboelectric generators, fuel cell applications, electrochromic materials and batteries; medical applications include polymers for contact lenses, materials for tissue engineering, sophisticated drug delivery systems; aerospace applications include outer space applications such as low temperature and pressure, also cosmic rays, outgassing, and atomic erosion, as well as materials for electrostactic dissipative coatings and space suits; a final chapter detailing materials that are used in other extreme environments, such as adhesives, and polymeric concrete materials. Audience Materials and polymer scientists working in manufacturing and plastics, civil and mechanical engineers in various industries such as automotive, aircraft, space, marine and shipping, electronics, construction, electrical, etc. will find this book essential. The book will also serve the needs of engineers and specialists who have only a passing contact with polymers and additives in industrial setting need to know more.
Download or read book Handbook of Sustainable Polymers for Additive Manufacturing written by Antonio Paesano and published by CRC Press. This book was released on 2022-05-24 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest technical information on sustainable materials that are feedstocks for additive manufacturing (AM). Topics covered include an up-to-date and extensive overview of raw materials, their chemistry, and functional properties of their commercial versions; a description of the relevant AM processes, products, applications, advantages, and limitations; prices and market data; and a forecast of sustainable materials used in AM, their properties, and applications in the near future. Data included are relative to current commercial products and are presented in easy-to-read tables and charts. Features Highlights up-to-date information and data of actual commercial materials Offers a broad survey of state-of the-art information Forecasts future materials, applications, and areas of R&D Contains simple language, explains technical terms, and minimizes technical lingo Includes over 200 tables, nearly 200 figures, and more than 1,700 references to technical publications, mostly very recent Handbook of Sustainable Polymers for Additive Manufacturing appeals to a diverse audience of students and academic, technical, and business professionals in the fields of materials science and mechanical, chemical, and manufacturing engineering.
Download or read book Microbiomes of Extreme Environments written by Ajar Nath Yadav and published by CRC Press. This book was released on 2021-03-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extreme microbiomes are those microorganisms thriving under extreme conditions where no other living being will have any chance to survive. The extreme habitats are those presenting high temperatures (thermophiles), low temperature (psychrophiles), hypersaline environments (halophiles), low and high pH (Acidophiles/alkaliphiles), high pressure (Piezophiles) are distributed worldwide. The extreme habitats have proved to offer a unique reservoir of genetic diversity and biological source of extremophiles. The extremophilic microbial diversity and their biotechnological potential use in agricultural and industrial applications will be a milestone for future needs. Extremophiles and their cell components, therefore, are expected to play an important role in the chemical, food, pharmaceutical, paper and textile industries as well as environmental biotechnology.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-26 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics - helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing - and recent developments - enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb
Download or read book Mechanics of Additive and Advanced Manufacturing Volume 8 written by Sharlotte Kramer and published by Springer. This book was released on 2018-08-23 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Additive and Advanced Manufacturing, Volume 8 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Fatigue & Fracture in AM Materials Additively Manufactured Metals & Structures AM Process Characterization Processing & Mechanical Behavior of AM Materials Dynamic Response of AM Materials Additively Manufactured Polymers & Composites
Download or read book Advances in Biodegradable Polymers written by G. F. Moore and published by iSmithers Rapra Publishing. This book was released on 1998-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report the factors which influence biodegradation are first explained. Methods of testing and evaluating biodegradation are then described and compared. The principles, relative costs and practical applications of specific tests are outlined together with the position with respect to recognised standards. The range of biodegradable polymers and polymer blends is then described, including natural and synthetic products. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photoinduced thiol ene click chemistry assisted additive manufacturing and freeze casting of polymer derived ceramics written by Wang, Xifan and published by Universitätsverlag der TU Berlin. This book was released on 2019-09-30 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-derived ceramics possess great advantages in the view of cellular ceramic processing compared to traditional powder-based technologies, as the polymeric nature of ceramic precursors allows the utilization of various shaping approaches. Amongst them, Additive Manufacturing and Freeze Casting are two novel shaping methods, which are capable of producing three-dimensional complex architectures and foams with well-controlled pore morphology, respectively. In this thesis, photoinduced thiol-ene polymerization of vinyl containing preceramic polymers with thiol monomers is systematically investigated, both from the energetic view and from the kinetic view. Subsequently, a novel stereolithographic approach is developed and applied to the additive manufacturing of complex-shaped polymer-derived ceramics. In addition, photopolymerization-assisted freeze casting is successfully developed to freeze cast liquid preceramic polymer and yields porous ceramics with well-controlled pore morphology. Polymerabgeleitete Keramiken besitzen große Vorteile im Hinblick auf den Verarbeitungsprozess von zellularen Keramiken im Vergleich zu traditionellen pulverbasierten Technologien, da der polymere Ursprung der Ausgangsstoffe für die Keramik die Nutzung verschiedener Formgebungsmethoden ermöglicht. Additive Fertigung und Gefriergießen sind zwei neuartige Formgebungsverfahren, die jeweils in der Lage sind, komplexe dreidimensionale Geometrien sowie Schäume mit einer kontrollierten Porenmorphologie zu produzieren. In dieser Arbeit wird die photoinduzierte Thiol-En-Polymerisation von prekeramischen Polymeren, die Vinyl und Thiol-Monomere enthalten, systematisch und sowohl aus energetischer als auch aus kinetischer Hinsicht untersucht. Im Folgenden wird ein neuartiger stereolithografischer Ansatz entwickelt und auf die additive Fertigung von polymerabgeleiteten Keramiken komplexer Gestalt angewendet. Zusätzlich wird photopolymerisierungsunterstütztes Gefriergießen erfolgreich entwickelt, um flüssige prekeramische Polymere gefrierzugießen und poröse Keramiken mit einer definierten Porenmorphologie zu erzeugen.
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.
Download or read book Materials Symposium 13 15 September 1961 Hotel Westward Ho Phoenix Arizona July 1961 written by and published by . This book was released on 1961 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Additive Manufacturing written by Tuhin Mukherjee and published by John Wiley & Sons. This book was released on 2023-10-03 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Additive manufacturing (AM) is a process of building parts by progressively adding thin layers of materials, sometimes layers thinner than a human hair. Computers play a central role in AM because the printing process is guided by a digital model. Imagine a computer slicing a three-dimensional object into many parallel thin slices, figuring out how to print each slice one after the other, and then having a mechanism to combine each layer with those previously deposited. Parts are made with metals, ceramics, polymers, and composite materials. There are many types of additive manufacturing. The type of material printed, its size, cost competitiveness, and other part attributes all influence the choice."--
