Download or read book Polymeric Seals and Sealing Technology written by J. A. Hickman and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report surveys the main types of seal, static and dynamic as well as those with more specific applications such as pneumatic and diaphragm seals. It then goes on to look at seal manufacture and the range of polymeric materials available for use in seal design from natural rubber and EPM to fluorosilicone rubbers and PTFE, providing data on their maximum and minimum usage temperatures. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Seals and Sealing Handbook written by Robert K. Flitney and published by Elsevier. This book was released on 2011-04-18 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wherever machinery operates there will be seals of some kind ensuring that the machine remains lubricated, the fluid being pumped does not leak, or the gas does not enter the atmosphere. Seals are ubiquitous, in industry, the home, transport and many other places. This 5th edition of a long-established title covers all types of seal by application: static, rotary, reciprocating etc. The book bears little resemblance to its predecessors, and Robert Flitney has re-planned and re-written every aspect of the subject. No engineer, designer or manufacturer of seals can afford to be without this unique resource. - Wide engineering market - Bang up to date! - Only one near competitor, now outdated
Download or read book Seals and Sealing Handbook written by Robert K. Flitney and published by Elsevier. This book was released on 2014-06-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seals and Sealing Handbook, Sixth Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices.Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failure Guide', the factors to consider should anything go wrong. Building on the practical, stepped approach of its predecessor, Seals and Sealing Handbook, 6th Edition remains an essential reference for any engineer or designer who uses seals in their work. - A comprehensive reference covering a broad range of seal types for all situations, to ensure that you are able to select the most appropriate seal for any given task - Includes supporting case studies and a unique 'Failure Guide' to help you troubleshoot if things go wrong - New edition includes the most up-to-date information on sealing technology, making it an essential reference for anyone who uses seals in their work
Download or read book Heat Sealing Technology and Engineering for Packaging written by Kazuo Hishinuma and published by DEStech Publications, Inc. This book was released on 2009 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to different phases of heat sealing. This book features reliable measuring methods to control heat seal quality, and offers methods for using peel seal and tear seal.
Download or read book Fluid Sealing Technology written by Heinz K Muller and published by Routledge. This book was released on 2019-01-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Assists users, developers, researchers, and manufacturers in the design, selection, development, and application of seals and sealing systems for fluids."
Download or read book Industrial Sealing Technology written by H. Hugo Buchter and published by John Wiley & Sons. This book was released on 1979-03-14 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to identify and solve all kinds of sealing problems, bringing together data previously scattered throughout the literature. Discusses basic principles of how seals work, what different kinds of seals can accomplish, and what range of environmental and mechanical specifications each seal type is suited for. Covers all major categories of seals, explaining what seals are available, how they function, who can fabricate them, and how they behave in the field. Also examines packings—both mathematically and empirically—and reciprocating shafts.
Download or read book Fluid Sealing Technology written by Heinz K Muller and published by Routledge. This book was released on 2019-01-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Assists users, developers, researchers, and manufacturers in the design, selection, development, and application of seals and sealing systems for fluids."
Download or read book Seals and Sealing Handbook written by Ronald Horace Warring and published by . This book was released on 1981 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pocket Book of Seals and Sealing written by Wolfgang Tietze and published by Vulkan-Verlag GmbH. This book was released on 2006 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pocket book pursues the aim of contributing to international comprehension of the most diverse sectors of this relatively heterogeneous field of seals and gaskets. In addition, this book is also intended to explain highly specialized seal and sealing terminology in English to trainees, apprentices and students in technical fields and disciplines, but primarily to address commercial employees, technicians and engineers who are confronted with the problems of seals and gaskets for the first time and are not yet familiar with the terminology of the specialized field but have a need to communicate in this field in the context of international negotiations and on multilingual project sites around the world.
Download or read book Fluid Sealing written by B. Nau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this 13th in the series of International Conferences on Fluid Sealing these meetings move into their third decade. To be precise it is now thirty-one years since BHRA, as it then was, convened, with no little trepidation, the first of these Conferences in Ashford, England. The massive set of proceedings now occupies a considerable length of shelf in my bookcase and represents a tremendous technological resource - over 400 separate papers. It is interesting that I seem to refer most often to the earlier volumes, probably most of all to the very first. Perhaps this is because this volume marks the beginning of "historic times", AD 0, for fluid sealing technology. There were of course important publications in this field even before 1961. A notable example is the seminal work of my predecessor at BHRA, Dr D. F. Denny, whose researches on reciprocating fluid power seals, "The sealing mechanism of flexible packings", was published in 1947 by a long since defunct government department, the Ministry of Supply. Another notable source is the Proceedings of the Institution of Mechanical Engineers' 1957 Conference on Lubrication and Wear. However, there is more to fluid st". aling technology than just tribology, as we must now call lubrication and wear, interest in static seals has really come to the fore in recent years - witness the large batch of papers dealing with this subject in the present Conference.
Download or read book Handbook of Fluid Sealing written by Robert V. Brink and published by McGraw-Hill Companies. This book was released on 1993 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference on the design, application, testing and manufacture of seals and gaskets for static and dynamic fluid sealing. It examines state-of-the-art practices in materials selection, test techniques, instrumentation developments, and mathematical tools for making informed sealing decisions.
Download or read book Handbook of Sealant Technology written by K.L. Mittal and published by CRC Press. This book was released on 2009-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sealing is an age-old problem that dates back to our earliest attempts to create a more comfortable living environment. Prehistoric people used natural sealants such as earth, loam, grass, and reeds to protect the interior of their homes against the weather. Today's applications extend to a myriad of uses. The Handbook of Sealant Technology provide
Download or read book Polymer Enhancement of Technical Textiles written by Roy W. Buckley and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical d104iles are high performance speciality materials. Applications are found in inflatable structures, tents, as reinforcement in composites for construction, as body armour and vehicle protection, in filters, as a base for flexible printed circuits, hose, conveyor belts and tyres. Polymer Enhancement of Technical d104iles examines the potential for these materials. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database.
Download or read book Polymer Product Failure written by P.R. Lewis and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of polymers in product design has continued to grow at a rate unrivalled by conventional materials such as metal, ceramics or glass. More polymeric materials are becoming available to the designer, and this report highlights the need for caution in new design work, for careful use of new materials, and for awareness of the product environment. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Download or read book Polymer Blends written by L.A. Utracki and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report begins by summarising the basis of polymer blending. This includes an outline of the techniques being used to characterise blends including spectroscopic techniques and rheometry. The types of polymer blends which have been studied are outlined. Methods of compatibilisation are discussed. The morphology of the phases in a blend is critical to property development - the types of morphology observed are described. Flow-induced morphology is described. Processing of blends and the effects on morphology are discussed including extrusion, thermoforming, blow moulding, injection moulding and foaming. The accompanying abstracts from the Rapra Polymer Library database provide useful further information and indicate sources of additional material.
Download or read book Life Cycle Assessment and Environmental Impact of Polymeric Products written by T. J. O'Neill and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review describes the process of life cycle analysis in some detail. It describes the different organisations involved in researching and applying these techniques and the database resources being used to generate comparative reports. The overview explains the factors to be considered, the terminology, the organisations involved in developing these techniques and the legislation which is driving the whole process forward. The ISO standards relating to environmental management are also discussed briefly in the document. Design for the environment is covered in the report. This review is accompanied by summaries of selected papers on life cycle analysis and environmental impact from the Rapra Polymer Library database.
Download or read book Polymer Processing with Supercritical Fluids written by Vannessa Goodship and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: SCFs are currently the subjects of intense research and commercial interest. Applications such as the RESS (rapid expansion of supercritical fluid solutions) process are part of standard industrial practice. In view of their ever-growing importance in the polymer industry there is a need to fully comprehend how supercritical fluids interrelate with polymeric materials to realise the potential that can be gained from their use. The authors review the basic principles of SCFs and their application within the polymer industry: characteristics and properties, extraction of unwanted residual products, polymerisation solvents, and polymer impregnation. Processing applications such as plasticisation, foaming and blending are also considered. There is discussion of the potential within the polymer recycling industry for use of SCFs as cleaning agents or within supercritical oxidation processes. Around 400 references with abstracts from recent global literature accompany this review, sourced from the Polymer Library, to facilitate further reading. A subject index and a company index are included.
