Download or read book Polymer Surface Modification Relevance to Adhesion Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2007-05-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fifth International Symposium on this topic, held in Toronto. The book is divided into two parts: Part 1: Surface Modification Techniques; Part 2: Adhesion Improvement to Polymer Surfaces.Various ways to modify a host of polymer surfaces for a variety of purposes are covered in this book, with emphasis on

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 5 written by Kash L. Mittal and published by CRC Press. This book was released on 2009-03-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.

Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2007-05-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fifth International Symposium on this topic, held in Toronto. The book is divided into two parts: Part 1: Surface Modification Techniques; Part 2: Adhesion Improvement to Polymer Surfaces. Various ways to modify a host of polymer surfaces for a variety of purposes are covered in this book, with emphasis on latest developments. There is a tremendous current interest in devising new ways or ameliorating the existing techniques to modify polymer surfaces to attain desired characteristics because of its importance in a legion of technological areas, and all signals indicate that this interest will continue unabated. So this book should fill the need and should be a valuable addition to the literature.

Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology

Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-03-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.

Download or read book Advances in Contact Angle Wettability and Adhesion Volume 3 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-02-23 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: With 16 chapters from world-renowned researchers, this book offers an extraordinary commentary on the burgeoning current research activity in contact angle and wettability The present volume constitutes Volume 3 in the ongoing series Advances in Contact Angle, Wettability and Adhesion which was conceived with the intent to provide periodic updates on the research activity and salient developments in the fascinating arena of contact angle, wettability and adhesion. The book is divided into four parts: Part 1: Contact Angle Measurement and Analysis; Part 2: Wettability Behavior; Part 3: Superhydrophobic Surfaces; Part 4: Wettability, Surface Free Energy and Adhesion. The topics covered include: procedure to measure and analyse contact angle/drop shape behaviors; contact angle measurement considering spreading, evaporation and reactive substrate; measurement of contact angle of a liquid on a substrate of the same liquid; evolution of axisymmetric droplet shape parameters; interfacial modulus of a solid surface; functionalization of textiles using UV-based techniques for surface modification--patterned wetting behavior; wettability behavior of oleophilic and oleophobic nanorough surfaces; wettability behavior of nanofluids; dielectrowetting for digital microfluidics; hydrophobicity and superhydrophobicity in fouling prevention; superhydrophobic/superhydrophilic hybrid surface; determination of the surface free energy of solid surfaces: statistical considerations; determination of apparent surface free energy using hysteresis approach; wettability correlations for bioadhesion to different materials; laser material processing for enhancing stem cell adhesion and growth.

Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 2883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Contact Angle Wettability and Adhesion Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2006-06-01 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the 4th International Symposium on Contact Angle, Wettability and Adhesion held in Philadelphia, PA, June 2004. The world of wettability is very wide and it plays a crucial role in many and varied technological areas ranging from microfluidics to biomedical to agriculture to welding. This volume contains a

Download or read book Advances in Contact Angle Wettability and Adhesion Volume 2 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2015-09-22 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume in the series "Contact Angle, Wettability and Adhesion." The premier volume was published in 2013. Even a cursory glance at the literature show that in recent years the interest in understanding and controlling wetting behavior has grown exponentially. Currently, there is tremendous research activity in rendering surfaces superhydrophobic, superhydrophilic, superoleophobic, superoleophilic, omniphobic and omniphilic because of their applications in many technologically important fields. Also the durability or robustness of materials with such super" characteristics is extremely significant, as well as the utilization of "green" (biobased) materials to obtain such surfaces. This book containing 19 articles reflects more recent developments in certain areas covered in its predecessor volume as well as it includes some topics which were not covered before. Concomitantly, this book provides a medium to keep abreast of the latest research activity and developments in the arena of contact angle, wettability and adhesion. The topics discussed include: Understanding of wetting hysteresis; fabrication of superhydrophobic materials; plasma treatment to achieve superhydrophilic surfaces; highly liquid repellent textiles; modification of paper surfaces to control liquid wetting and adhesion; Cheerios effect and its control; engineering materials with superwettability; laser ablation to create micro/nano-patterned surfaces; liquid repellent amorphous carbon nanoparticle networks; mechanical durability of liquid repellent surfaces; wetting of solid walls and spontaneous capillary flow; relationship between roughness and oleophilicity; superhydrophobic and superoleophobic green materials; computational analysis of wetting on hydrophobic surfaces: application to self-cleaning mechanisms; bubble adhesion to superhydrophilic surfaces; surface free energy of superhydrophobic materials; and role of surface free energy in pharmaceutical tablet tensile strength.

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Contact Angle Wettability and Adhesion written by K. L. Mittal and published by BRILL. This book was released on 2009-09-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of wettability (measured in terms of contact angle) is of tremendous interest from both fundamental and applied points of view, Wettability plays an essential role in many industrial processes, so an understanding of factors dictating wettability and how to modulate it is of paramount importance. In the last years there has been an explosive interest in superhydrophobic surfaces (i.e., surfaces with water contact angle of 150° or higher) because of their relevance/importance in many areas ranging from self-cleaning windows to nanofluidics. Also recently there has been heightened activity in the field of electrowetting. Contact Angle, Wettability and Adhesion, Volume 6 is divided into four parts: Part 1: Fundamental Aspects; Part 2: Wettability Control/Modification; Part 3: Superhydrophobic Surfaces; and Part 4: Surface Free Energy and Relevance of Wettability in Adhesion. The topics covered include: a guide to the equilibrium contact angles maze: fundamental aspects of wetting of rough and chemically heterogeneous surfaces: work of adhesion for rock-oil-brine systems; Is the world basic?; wettability control/modification using various approaches; superhydrophobic surfaces and ways to impart superhydrophobicity; adsorption on superhydrophobic surfaces; solid surface energy determination; surface modification of different materials; relevance of wettability and adhesion aspects in a variety of reinforced composites. In essence, this volume reflects the cumulative wisdom of many active and renowned researchers and provides a commentary on contemporary research in the fascinating world of contact angles and wettability. This volume and its predecessors (5 volumes), containing bountiful information, will be of much value to anyone interested/involved in controlling wetting phenomena and their applications.

Download or read book Plastic Surface Modification written by Rory A. Wolf and published by Hanser Publications. This book was released on 2015-12-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer surface modification is a topic that has been the object of a large number of investigations by academia and industry, but relatively little attention has been paid to surface activation technologies which, when appropriately utilized, make specific polymer-based surfaces receptive to value-adding interfaces such as inks, coating and adhesive formulations. Adhesion strength is generally determined by the properties of a base material and its interface. Optimizing adhesion strength can be accomplished by modifying these interfaces chemically and physically. As polymers are continually engineered to meet new product application requirements, optimizing the activation of these surfaces requires a fresh look at cost effective ways to etch, clean and functionalize them. These demands require detailed information on the surface treatment of classic materials, as well as an examination of the latest surface treatment machine designs available anywhere in the world today which are used to process these materials. There are four full chapters devoted specifically to corona, ozone, flame, and plasma discharge surface treatment technologies; and an interesting and useful identification of common adhesion maladays.

Download or read book Silanes and Other Coupling Agents Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2007-04-30 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Fifth International Symposium held on this topic in Toronto. A total of 26 papers covering many ramifications of silanes and other coupling agents are included in this book. The topics covered include: various ways to deposit silanes; silane adsorption; investigation of interfacial interactions between si

Download or read book Superhydrophobic Surfaces written by Alain Carré and published by BRILL. This book was released on 2009-04-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superhydrophobic surfaces (water contact angles higher than 150º) can only be achieved by a combination of hydrophobicity (low surface energy materials) with appropriate surface texture. In nature one can find an array of impressive and elegant examples of superhydrophobic surfaces. For example, on a lotus leaf rain drops bounce off after impact, then entirely roll off the lotus leaf and drag along any dirt particles, without leaving residues. The artificial design of superhydrophobic and self-cleaning surfaces has become an extremely active area of fundamental and applied research.This book presents both fundamental and applied aspects of superhydrophobic surfaces. It describes also different strategies for making superhydrophobic surfaces from a large diversity of materials (polymers, metals and other inorganic materials, composites) and processes (lithographic techniques, electrochemical processes, self-assembly processes, colloidal particles, sol-gel processes, nanofilaments, or simple scraping).A bountiful of information is covered in this book which represents cumulative wisdom of many world-renowned researchers in the fascinating and burgeoning area of superhydrophobic surfaces.

Download or read book Laser Surface Modification and Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-09-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.