Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.

Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 3 written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003.Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince tha

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2007-05-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fifth International Symposium on this topic, held in Toronto. The book is divided into two parts: Part 1: Surface Modification Techniques; Part 2: Adhesion Improvement to Polymer Surfaces.Various ways to modify a host of polymer surfaces for a variety of purposes are covered in this book, with emphasis on

Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.

Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 5 written by Kash L. Mittal and published by CRC Press. This book was released on 2009-03-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the

Download or read book Plastic Surface Modification written by Rory A. Wolf and published by Hanser Publications. This book was released on 2015-12-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer surface modification is a topic that has been the object of a large number of investigations by academia and industry, but relatively little attention has been paid to surface activation technologies which, when appropriately utilized, make specific polymer-based surfaces receptive to value-adding interfaces such as inks, coating and adhesive formulations. Adhesion strength is generally determined by the properties of a base material and its interface. Optimizing adhesion strength can be accomplished by modifying these interfaces chemically and physically. As polymers are continually engineered to meet new product application requirements, optimizing the activation of these surfaces requires a fresh look at cost effective ways to etch, clean and functionalize them. These demands require detailed information on the surface treatment of classic materials, as well as an examination of the latest surface treatment machine designs available anywhere in the world today which are used to process these materials. There are four full chapters devoted specifically to corona, ozone, flame, and plasma discharge surface treatment technologies; and an interesting and useful identification of common adhesion maladays.

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 1 written by Kash L. Mittal and published by CRC Press. This book was released on 1996-02-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book embodies the proceedings of the International Symposium on Polymer Surface Modification: Relevance to Adhesion, held in Las Vegas. The articles in this book were previously published in four special issues of the Journal of Adhesion Science and Technology. Polymeric materials are used for a legion of applications in a host of technological areas. However, polymers are innately hydrophobic, low surface energy materials and thus do not adhere well to other materials brought in contact. This necessitates their surface modification/treatment to render them adhesionable. The articles in this volume cover a wide array of surface modification techniques, ranging from simple to sophisticated, wet to dry, vacuum to nonvacuum for a host of polymeric materials. The topics covered include: plasma surface treatment of a number of polymers; laser surface treatment of various polymers; corona, flame, UV, ozone, UV/ozone, photochemical, photografting, chemical grafting, and chemical methods of polymer surface modification; modification of polyamide surfaces by microorganisms; effect of polymer surface modification on metal/polymer adhesion; barrier properties of surface treated polymers; ageing study of surface treated polymers; physico-chemical properties of surface-modified polymers; application of inverse gas chromatography in the characterization of polymers; and surface acoustic wave sensor to study polymer surface treatments.

Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003. Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince that currently there is tremendous interest and R&D activity in the area of polymer surface modification to attain their desired surface characteristics, particularly to enhance their adhesion. This volume contains a total of 25 papers which were properly peer reviewed, revised and edited. So this book is not merely a collection of papers, rather represents the highest standard of publication. The book is divided into three parts: 1. Plasma Surface Modification Techniques; 2. Other / Miscellaneous Surface Modification Techniques; and 3. General Papers. The topics covered include: low pressure plasma surface modification of a variety of polymers using various gases; atmospheric pressure plasma treatment; improvement of stain release properties of fabrics; modification of electrostatic properties of polymers; photon-based processes for surface modification of fibers; excimer UV light treatment; excimer laser surface treatment; low-energy ion treatment; photo-grafting and photo-curing; metallization of treated polymers; chemical (wet) functionalization of polymers; adhesion of paints to thermoplastic substrates; polymer release surfaces; nanolithography in polymer films; gas barrier properties of ceramic layers on polymers; and modification of interphase layer and relevance to adhesion. This volume and its predecessors containing plentiful information should serve as a comprehensive source of latest R&D activity in the highly technologically important arena of polymer surface modification. Anyone interested –centrally or peripherally– in knowing or learning about the various ways to modify polymer surfaces should find this book of immense value.

Download or read book Polymer Interface and Adhesion written by Wu and published by CRC Press. This book was released on 1982-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references, exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion, and surface modifications. Emphasis is placed on physical concepts and mechanisms, using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical, mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource b

Download or read book Mineral Fillers in Thermoplastics I written by Josef Jancar and published by Springer Science & Business Media. This book was released on 1998-12-04 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a growing number of engineering applications of light weight and energy efficient plastics can be found in high quality parts vital to the func tioning of entire equipments and structures. Improved mechanical properties, especially balance of stiffness and toughness, are among the most frequently desired features of the new materials. In addition, reduced flammability is con sidered the single most important requirement for further expansion of plastics into large volume and demanding markets such as construction and mass trans port. Production of power cables also requires flame retardant cable jacketing plastics to replace or at least to reduce consumption of environmentally unsound PVC. The two principal ways to achieve the goals mentioned above include the development of completely new thermoplastic polymers and various modifica tions of the existing ones. Development and commercialization of a new ther moplastic require mobilization of large human and financial resources, the lat ter being within the range from $100 million to $10 billion, in comparison to $100 thousand to $10 million needed to develop and commercialize polymeric mate rial with prescribed end use properties using physical or chemical modification of an existing plastic. In addition, the various markets utilizing thermoplastics demand large flexibility in material properties with only moderate volumes, at the best.

Download or read book Adhesion and Adsorption of Polymers written by Lieng-Huang Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Honolulu is a most beautiful place, suitable for all occa sions. Its choice as the meeting site for the first Joint Chemical Congress between the American Chemical Society and the Chemical Society of Japan was praised by scientists from both sides. During this Congress, the International Conference on Adhesion and Adsorption of Polymers was held at the Hyatt Regency Hotel between April 2 and 5, 1979. We had speakers from ten nations presenting over forty papers related to the subject matter. It was a memorable event. Unlike our two previous adhesion symposia held in 1971 and 1975, this was the first time in the same conference that we discussed both adhesion and adsorption of polymers simultaneously. These two important phenomena are not only inter-related, but also equally important in adhesive technology as well as biochemical processes. The papers presented to this Conference deal with these two phenomena from both fundamental and practical viewpoints. Furthermore, with the advance of new surface analytical techniques, the actual, microscopic happenings at the interfaces can be pin pointed. Thus, characterization of interface became one of the major focuses of this Conference. As a result, a broad coverage of the subject matter includes statistical thermodynamics, surface physics, surface analysis, fracture mechanics, viscoelasticity, failure analysis, surface modification, adsorption kinetics, bio polymer adsorption, etc. Thanks to the diligence of our contri butors, we are now able to publish the final papers in these two volumes.

Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-03-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.

Download or read book Contact Angle Wettability and Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2006-05-29 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the 4th International Symposium on Contact Angle, Wettability and Adhesion held in Philadelphia, PA, June 2004. The world of wettability is very wide and it plays a crucial role in many and varied technological areas ranging from microfluidics to biomedical to agriculture to welding. This volume contains a total of 31 papers covering many ramifications of contact angle, wettability and adhesion. All manuscripts were rigorously peer-reviewed and revised, and properly edited before inclusion in this book. The topics covered include: fundamental aspects of contact line region; evaporative behavior of sessile drops; various factors influencing contact angle measurements; different kinds of contact angles; various ways to measure contact angles; contact angle hysteresis; contact angle measurements on various materials (smooth, rough, porous, heterogeneous); effect of electric field on contact angle (electrowetting); wetting and spreading on heterogeneous surfaces; factors influencing wetting/spreading phenomena; determination of solid surface free energy via contact angle measurements; application of AFM in determining solid surface tension at the nano-scale; ultralyophobic surfaces; surface modification and wettability; multiphase flow dynamics in porous media; thin film coatings for textile materials; bio-fouling resistant coatings; relationships between wetting and adhesion; and relevance/importance of wetting and surface energetics in technological applications, including cleaning of flooring materials, kinetics of oil removal from coating materials, cell adhesion, and mold compound- metal adhesion in semiconductor packaging.

Download or read book Laser Technology written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-01-17 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acronym Laser is derived from Light Amplification by Stimulated Emission of Radiation. With the advent of the ruby laser in 1960, there has been tremendous research activity in developing novel, more versatile and more efficient laser sources or devices, as lasers applications are ubiquitous. Today, lasers are used in many areas of human endeavor and are routinely employed in a host of diverse fields: various branches of engineering, microelectronics, biomedical, medicine, dentistry, surgery, surface modification, to name just a few. In this book (containing 10 chapters) we have focused on application of lasers in adhesion and related areas. The topics covered include: Topographical modification of polymers and metals by laser ablation to create superhydrophobic surfaces. Non-ablative laser surface modification. Laser surface modification to enhance adhesion. Laser surface engineering of materials to modulate their wetting behavior. Laser surface modification in dentistry. Laser polymer welding. Laser based adhesion testing technique to measure thin film-substrate interface toughness. Laser surface removal of hard thin ceramic coatings. Laser removal of particles from surfaces. Laser induced thin film debonding for micro-device fabrication applications.