Download or read book Polymer Support Fluids in Civil Engineering written by Carlos Lam and published by ICE Publishing. This book was released on 2017-11-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first on the use of polymer support fluids in the construction industry, this book provides a detailed study of their use in civil engineering, covering all major aspects including fundamental material properties, laboratory and site testing, as well as case histories and specifications.
Download or read book Physical Properties of Polymer Support Fluids in Use and Their Measurement Techniques written by Carlos Lam and published by . This book was released on 2015 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper was concerned with the physical properties of polymeric excavation-support fluids during use and reuse in the field and the techniques for their measurement. Synthetic polymer fluids were used as replacements for conventional bentonite clay slurries for the construction of bored piles (drilled shafts) and diaphragm walls since the early 1990s. They are used, in part, because of their rheological properties, especially their shear-thinning behavior, but to date research has focused on clean fluids and little also has been reported on the effects of reuse under field conditions and on the suitability of viscosity measurement devices. To fill this knowledge gap, the properties of polymer fluids were measured on a construction site in London, UK, over the entire construction period of 52 days. It was found that the density of the fluid and hence other properties were highly dependent on the decisions made by the contractor and that a well-designed tank system could offer considerable benefits in terms of fluid maintenance. Regarding the monitoring of fluid viscosity, the Marsh funnel was, unsurprisingly, found to be unsuitable for detailed analyses; although it did provide some useful information about the overall fluid condition. However, with a direct-indicating viscometer, it was possible to characterize the shear-thinning properties of the fluids over a range of shear rates and stages of fluid use. From the test results, it was concluded that the effect of reuse was to increase in the overall fluid viscosity but at the same time to enhance the shear-thinning behavior.
Download or read book Properties and Applications of Polymer Support Fluids in Geotechnical Engineering written by Carlos Lam and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology of Complex Fluids written by Abhijit P. Deshpande and published by Springer Science & Business Media. This book was released on 2010-09-20 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the School on Rheology of Complex fluids is to bring together young researchers and teachers from educational and R&D institutions, and expose them to the basic concepts and research techniques used in the study of rheological behavior of complex fluids. The lectures will be delivered by well-recognized experts. The book contents will be based on the lecture notes of the school.
Download or read book Geosynthetics and Their Applications written by Sanjay Kumar Shukla and published by Thomas Telford. This book was released on 2002 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents topics that are based on field application areas for geosynthetics in civil engineering. This book also includes case histories and practical aspects of the application of geosynthetics, along with developments and references. It is useful for students and engineers in search of approaches to solutions for civil engineering problems.
Download or read book Fundamentals of Ground Improvement Engineering written by Jeffrey Evans and published by CRC Press. This book was released on 2021-09-17 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground improvement has been one of the most dynamic and rapidly evolving areas of geotechnical engineering and construction over the past 40 years. The need to develop sites with marginal soils has made ground improvement an increasingly important core component of geotechnical engineering curricula. Fundamentals of Ground Improvement Engineering addresses the most effective and latest cutting-edge techniques for ground improvement. Key ground improvement methods are introduced that provide readers with a thorough understanding of the theory, design principles, and construction approaches that underpin each method. Major topics are compaction, permeation grouting, vibratory methods, soil mixing, stabilization and solidification, cutoff walls, dewatering, consolidation, geosynthetics, jet grouting, ground freezing, compaction grouting, and earth retention. The book is ideal for undergraduate and graduate-level university students, as well as practitioners seeking fundamental background in these techniques. The numerous problems, with worked examples, photographs, schematics, charts and graphs make it an excellent reference and teaching tool.
Download or read book Rheology of Filled Polymer Systems written by A.V. Shenoy and published by Springer Science & Business Media. This book was released on 1999-01-31 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rheology of filled polymer systems is an ever expanding field in the polymer industry today. Using a concise, practical and simple format this comprehensive work explains the concepts behind filled polymer systems and the rheological techniques involved in studying their behaviour. Aware that the readers of the book may come from differing background, the first three chapters familiarize the reader with the basics about polymers, fillers and physicochemical interactions between them, rheology and rheometry. Covering such topics as preparation of filled polymer systems, steady shear viscous properties and extentional flow properties, this book covers the areas of importance from an introductory level through to more complex issues.
Download or read book ICE Specification for Piling and Embedded Retaining Walls written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition retains the three-part approach of the second edition. Part A is an introduction to the essential concepts necessary to procure a piling or retaining wall contract. Part B is the specification and is still the only part of this document intended for incorporation in contracts. Part C provides guidance for use of the specification and essential background information for specifiers and contractors alike. Unlike the second edition, Part 3 guidance notes immediately follow the relevant Part 2 specification requirements. The three sections provide the reader with a full compendium without being overly prescriptive.
Download or read book Introduction to Plastics Engineering written by Vijay K. Stokes and published by John Wiley & Sons. This book was released on 2020-04-02 with total page 1627 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.
Download or read book Civil Engineering Materials written by Peter A. Claisse and published by Butterworth-Heinemann. This book was released on 2015-09-03 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering Materials explains why construction materials behave the way they do. It covers the construction materials content for undergraduate courses in civil engineering and related subjects and serves as a valuable reference for professionals working in the construction industry. The book concentrates on demonstrating methods to obtain, analyse and use information rather than focusing on presenting large amounts of data. Beginning with basic properties of materials, it moves on to more complex areas such as the theory of concrete durability and corrosion of steel. Discusses the broad scope of traditional, emerging, and non-structural materials Explains what material properties such as specific heat, thermal conductivity and electrical resistivity are and how they can be used to calculate the performance of construction materials. Contains numerous worked examples with detailed solutions that provide precise references to the relevant equations in the text. Includes a detailed section on how to write reports as well as a full section on how to use and interpret publications, giving students and early career professionals valuable practical guidance.
Download or read book Proceedings of the 5th International Conference on Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Chemical Engineering Fluid Mechanics written by Ron Darby and published by CRC Press. This book was released on 2016-11-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the most current, accurate, and practical fluid mechanics related applications that the practicing BS level engineer needs today in the chemical and related industries, in addition to a fundamental understanding of these applications based upon sound fundamental basic scientific principles. The emphasis remains on problem solving, and the new edition includes many more examples.
Download or read book ICE Manual of Geotechnical Engineering Volume 2 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Pile Design and Construction Practice Sixth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National Annex Updated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original—combining practical know how with scientific knowledge —and emphasizing relevant principles and applications of soil mechanics and design. Contractors, geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations can find the most current types of pile, piling equipment, and relevant methods in this latest work. The book summarizes recent changes, including new codified design procedures addressing design parameters and partial safety factors. It also presents several examples, many based on actual problems. Broad and Comprehensive In Its Coverage Contains material applicable to modern computational practice Provides new sections on the construction of micropiles and CFA piles, pile-soil interaction, verification of pile materials, piling for integral bridge abutments, use of polymer stabilising fluids, and more Includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading, and the structural design of piles and pile groups Covers marine structures, durability of piled foundations, ground investigations, and pile testing Addresses miscellaneous problems such as machinery foundations, underpinning, mining subsidence areas, geothermal piles, and unexploded ordnance Pile Design and Construction Practice, Sixth Edition serves as a comprehensive guide for practicing geotechnical engineers and engineering geologists. This text also works as a resource for piling contractors and graduate students studying geotechnical engineering.
Download or read book Proceedings of the 5th Indian Young Geotechnical Engineers Conference 5IYGEC written by D L Shah and published by Shweta Publications. This book was released on 2015-03-14 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extended Abstracts of Research Papers Published in 5IYGEC: The 5th Indian Young Geotechnical Engineers Conference, organized by Indian Geotechnical Society to commemorate Silver Jubilee of IGS, Baroda Chapter.
