Download or read book Polymer Nanocomposites written by Aravind Dasari and published by Springer. This book was released on 2016-06-28 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highlights ongoing research efforts on different aspects of polymer nanocomposites and explores their potentials to exhibit multi-functional properties. In this context, it addresses both fundamental and advanced concepts, while delineating the parameters and mechanisms responsible for these potentials. Aspects considered include embrittlement/toughness; wear/scratch behaviour; thermal stability and flame retardancy; barrier, electrical and thermal conductivity; and optical and magnetic properties. Further, the book was written as a coherent unit rather than a collection of chapters on different topics. As such, the results, analyses and discussions presented herein provide a guide for the development of a new class of multi-functional nanocomposites. Offering an invaluable resource for materials researchers and postgraduate students in the polymer composites field, they will also greatly benefit materials
Download or read book Polymer Nanocomposites written by Giuliana Gorrasi and published by MDPI. This book was released on 2018-11-13 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Polymer Nanocomposites" that was published in Nanomaterials
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Nanomaterials and Polymer Nanocomposites written by Niranjan Karak and published by Elsevier. This book was released on 2018-10-24 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials and Polymer Nanocomposites: Raw Materials to Applications brings together the most recent research in nanoparticles and polymer nanocomposites for a range of applications. The book's coverage is comprehensive, starting with synthesis techniques, then moving to characterization and applications of several different classes of nanomaterial and nanoparticle in nanocomposites. By presenting different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose and bio-based polymers in a structured manner, the book enables an efficient comparison of properties and capabilities for these advanced materials, making it relevant both for researchers in an academic environment and also industrial R&D. This book is particularly distinctive because it centers on the raw materials on which the nanocomposites are based, the biological properties of the range of materials discussed, and the environmental and economic considerations of different polymer systems. - Presents a thorough, up-to-date review of the latest advances and developments in the field of nanomaterials and polymer nanocomposites, with a particular focus on raw materials - Includes comprehensive coverage from historical backgrounds, synthesis techniques, characterization, and a detailed look at new and emerging applications for polymer nanocomposites - Provides a range of different material classes, including metal and metal oxides, biopolymers, graphene and cellulose, among others
Download or read book Polymer Nanotubes Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2014-09-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the successful first edition of the book in 2010, the field has matured and a large number of advancements have been made to the science of polymer nanotube nanocomposites (PNT) in terms of synthesis, filler surface modification, as well as properties. Moreover, a number of commercial applications have been realized. The aim of this second volume of the book is, thus, to update the information presented in the first volume as well as to incorporate the recent research and industrial developments. This edited volume brings together contributions from a variety of senior scientists in the field of polymer nanotube composites technology to shed light on the recent advances in these commercially important areas of polymer technology. The book provides the following features: Reviews the various synthesis techniques, properties and applications of the polymer nanocomposite systems. Describes the functionalization strategies for single walled nanotubes in order to achieve their nanoscale dispersion in epoxy matrices. Provides insights into the multiscale modeling of the properties of PNT. Provides perspectives on the electron microscopy characterization of PNT. Presents an overview of the different methodologies to achieve micro-patterning of PNT. Describes the recent progress on hybridization modifications of CNTs with carbon nanomaterials and their further applications in polymer nanocomposites. Provides details on the foams generates with PNT. Provides information on synthesis and properties of polycarbonate nanocomposite. Describes the advanced microscopy techniques for understanding of the polymer/nanotube composite interfaces and properties.
Download or read book Polymer Nanotube Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2010-12-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a one-stop source for information on synthesis, properties, and potential applications of nanotube reinforced polymer nanocomposites Research on polymer nanotube composites is a relatively new field, and a lot of development is required to achieve a very large-scale commercial application. Although a number of developments have taken place in terms of the dispersion of nanotubes in the polymer matrices and corresponding improvements in the various physical properties of the composites, a meaningful text on the subject, which can assimilate these advancements in one place to provide an overall potential of the technology, is missing. This edited volume brings together contributions from a variety of senior scientists in the field of polymer nanotube composites technology to shed light on the recent advances in these commercially important areas of polymer technology. The book provides the following features: A summary of recent advances in nanotube composite synthesis technology A basic introduction to polymer nanotube nanocomposite technology for readers who are new to the field Valuable insights for the use of technologies for polymer nanocomposites for commercial application Reviews of current polymer nanotube systems to underscore the high potential of nanotubes as fillers Pathways for large-scale commercial applications ofnanotube nanocomposites
Download or read book Advances in Polymer Nanocomposites written by Fengge Gao and published by Elsevier. This book was released on 2012-10-19 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of nanoparticles to polymer composites has led to a new generation of composite materials with enhanced and novel properties. Advances in polymer nanocomposites reviews the main types of polymer nanocomposites and their applications.Part one reviews types of polymer nanocomposites according to fillers. Processing of carbon nanotube-based nanocomposites, layered double hydroxides (LDHs) and cellulose nanoparticles as functional fillers and reinforcement are discussed, alongside calcium carbonate and metal-polymer nanocomposites. Part two focuses on types of polymer nanocomposites according to matrix polymer, with polyolefin-based, (PVC)-based, nylon-based, (PET)-based and thermoplastic polyurethane (TPU)-based polymer nanocomposites discussed. Soft, gel and biodegradable polymer nanocomposites are also considered. Part three goes on to investigate key applications, including fuel cells, aerospace applications, optical applications, coatings and flame-retardant polymer nanocomposites.With its distinguished editor and international team of expert contributors, Advances in polymer nanocomposites is an essential guide for professionals and academics involved in all aspects of the design, development and application of polymer nanocomposites. - Reviews the main types of polymer nanocomposites and their applications - Discusses processing of carbon nanotube-based nanocomposites, layered double hydroxides (LDHs) and cellulose nanoparticles as functional fillers and reinforcement - Discusses polyolefin-based, (PVC)-based, nylon-based, (PET)-based and thermoplastic polyurethane (TPU)-based polymer nanocomposites
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Handbook of Polymer Nanocomposites Processing Performance and Application written by Kamal K. Kar and published by Springer. This book was released on 2014-12-01 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume B forms one volume of a Handbook about Polymer Nanocomposites. Volume B deals with Carbon nanotube based polymer composites. The preparation, architecture, characterisation, properties and application of polymer nanocomposites are discussed within some 25 chapters. Each chapter has been authored by experts in the respective field.
Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. - Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials - Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage - Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites - Features chapters written by world leading experts
Download or read book Dielectric Polymer Nanocomposites written by J. Keith Nelson and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Polymer Nanocomposites provides the first in-depth discussion of nano-dielectrics, an emerging and fast moving topic in electrical insulation. The text begins with an overview of the background, principles and promise of nanodielectrics, followed by a discussion of the processing of nanocomposites and then proceeds with special considerations of clay based processes, mechanical, thermal and electric properties and surface properties as well as erosion resistance. Carbon nanotubes are discussed as a means of creation of non linear conductivity, the text concludes with a industrial applications perspective.
Download or read book Spectroscopy of Polymer Nanocomposites written by Sabu Thomas and published by William Andrew. This book was released on 2016-02-16 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy of Polymer Nanocomposites covers all aspects of the spectroscopic characterization of polymer nanocomposites. More than 25 spectroscopy characterization techniques – almost all used in materials science – are treated in the book, with discussion of their potentialities and limitations. By comparing the techniques with each other and presenting the techniques together with their specific application areas, the book provides scientists and engineers the information needed for solving specific problems and choosing the right technique for analyzing the material structure. From this, the dispersion structure of fillers, property relations and filler-polymer interactions can be determined, and, ultimately, the right materials can be chosen for the right applications. Besides the techniques and structure-property relations, aspects covered include: phase segregation of filler particles, filler agglomeration and deagglomeration, filler dispersion, filler-polymer interactions, surfaces and interfaces. The book also examines recent developments, as well as unresolved issues and new challenges, in the characterization of surfaces and interfaces in polymer nanocomposites. This handpicked selection of topics, and the combined expertise of contributors from industry, academia, government and private research organizations across the globe, make this survey an outstanding reference source for anyone involved in the field of polymer nanocomposites in academia or industry. - Provides comprehensive coverage of spectroscopy techniques for analyzing polymer nanocomposites - Enables researchers and engineers to choose the right technique and make better materials decisions in research and a range of industries - Presents the fundamentals, information on structure-property relations, and all other aspects relevant for understanding spectroscopic analyses of nanoreinforced polymers and their applications
Download or read book Handbook of Polymer Nanocomposites Processing Performance and Application written by Jitendra K. Pandey and published by Springer. This book was released on 2014-12-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume C forms one volume of a Handbook about Polymer Nanocomposites. Volume C deals with Polymer nano-composites of cellulose nano-particles. The preparation, architecture, characterisation, properties and application of polymer nanocomposites are discussed within some 27 chapters. Each chapter has been authored by experts in the respective field.
Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Polymer Nanocomposite Research Advances written by Sabu Thomas and published by Nova Publishers. This book was released on 2008 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book focuses on the preparation, properties, characterisation and applications of polymer nanocomposites. The various manufacturing techniques, analysis of morphology, filler dispersion, and interfacial interactions have been described are detail. In the case of polymer nanocomposites, filler dispersion, intercalation/exfoliation, orientation and filler-matrix interaction are the main parameters that determine the physical, thermal, transport, mechanical and rheological properties of the nanocomposites. In this book the ultimate properties of the nanocomposites have been correlated with the key parameters of filler dispersion and filler-matrix interaction. The use of various sophisticated instrument techniques for the characterisation of these nanocomposites are also reviewed.
Download or read book Polymer Carbon Nanotube Composites written by Cor Koning and published by CRC Press. This book was released on 2012-04-11 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a comprehensive toolbox for dispersing single-walled and multiwalled carbon nanotubes in thermoplastic polymer matrices. The book starts with an overview of all known techniques for dispersing CNTs in thermoplastic polymers and then concentrates on one of the most versatile techniques known nowadays: the so-called la
