Download or read book Polymer Colloids II written by Robert M. Fitch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is comprised of most of the papers presented at a symposium held in Miami Beach during the national meeting of the American Chemical Society in September, 1978. In a sense, it is a sequel to the first ACS symposium held on this topic and published under the title "Polymer Colloids" in 1971 by Plenum Press. That volume contained 12 papers, whereas "Polymer Colloids II" contains 33, an indication of the magnitude of the growth of the field in less than a decade. Increased sophistication probably best characterizes the changes which have taken place, especially in the realm of instru mentation. Ten years ago techniques such as quasielastic light scattering, X-ray photoelectron spectroscopy (XPS - also known as ESCA), ion scattering spectroscopy (ISS), ultrasonic absorption spectroscopy and hydrodynamic exclusion chromatography (REC) were unavailable to the polymer colloid chemist. Recent advances in all of these methods are described in this volume. Although the book deals primarily with "synthetic latexes" or "emulsion polymers" as colloids, there are a number of papers which deal with their synthesis: particle nucleation in emulsion polymer ization, the synthesis of emulsifier-free polymer colloids using novel reagents, molecular weight distributions derived from the kinetics of emulsion polymerization, and anionically polymerized non-aqueous polymer colloids. The kinetics and thermodynamics of the swelling of latex particles by monomers is also dealt with here.
Download or read book Polymer Colloids written by Robert M. Fitch and published by Academic Press. This book was released on 1997-05-02 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the beginner to the field with a solid development of the fundamentals, without getting bogged down in details. It provides an insight that can only be found from the author's 40+ years of experience
Download or read book Colloids and Interfaces with Surfactants and Polymers written by James Goodwin and published by John Wiley & Sons. This book was released on 2009-08-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: From blood to milk, pumice to gelatine, most scientists interact with colloids on a daily basis without any real knowledge of their nature. Building on the success of the first edition, Colloids and Interfaces with Surfactants and Polymers Second Edition is a user-friendly, non-technical introduction to colloids and interfaces. Includes: Many practical examples of colloid and interface science An enhanced section on fluorescence microscopy, a widely used technique in biological systems for the optical imaging of cellular structures A new section on phenomenology (the principle of time/temperature superposition), which enables the experimentalist to extend the frequency range of their rheological instruments New information on sedimentation and strategies for the control of sedimentation, which is critical in many dispersions of commercial importance Fresh treatments of traditional theoretical topics like the electrical double-layer, colloidal interactions, wetting behavior and light scattering, as well as more recent advances in polymer science, statistical mechanics and the use of neutrons In-depth discussions of widely used techniques with mathematics used in a straight-forward way so quantitative descriptions of colloid and interface properties can be derived Colloids and Interfaces with Surfactants and Polymers Second Edition explains all the fundamental concepts of colloids and interfaces as well as detailing some of the more advanced aspects which might be useful in specific applications. Intended for undergraduate and graduate courses in colloids and soft materials, the book is also relevant to those in the chemical, coatings, cosmetics, ceramics, food, pharmaceutical and oil industries. For Powerpoint slides of all the figures in the book, please see the Instructor Companion website at http://bcs.wiley.com/he-bcs/Books?action=index&bcsId=5121&itemId=0470518804
Download or read book Polymer Colloids II written by Robert M. Fitch and published by Springer. This book was released on 1980-05 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is comprised of most of the papers presented at a symposium held in Miami Beach during the national meeting of the American Chemical Society in September, 1978. In a sense, it is a sequel to the first ACS symposium held on this topic and published under the title "Polymer Colloids" in 1971 by Plenum Press. That volume contained 12 papers, whereas "Polymer Colloids II" contains 33, an indication of the magnitude of the growth of the field in less than a decade. Increased sophistication probably best characterizes the changes which have taken place, especially in the realm of instru mentation. Ten years ago techniques such as quasielastic light scattering, X-ray photoelectron spectroscopy (XPS - also known as ESCA), ion scattering spectroscopy (ISS), ultrasonic absorption spectroscopy and hydrodynamic exclusion chromatography (REC) were unavailable to the polymer colloid chemist. Recent advances in all of these methods are described in this volume. Although the book deals primarily with "synthetic latexes" or "emulsion polymers" as colloids, there are a number of papers which deal with their synthesis: particle nucleation in emulsion polymer ization, the synthesis of emulsifier-free polymer colloids using novel reagents, molecular weight distributions derived from the kinetics of emulsion polymerization, and anionically polymerized non-aqueous polymer colloids. The kinetics and thermodynamics of the swelling of latex particles by monomers is also dealt with here.
Download or read book Colloids and the Depletion Interaction written by Henk N. W. Lekkerkerker and published by Springer Nature. This book was released on with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field.
Download or read book Polymer Colloids written by R. Buscall and published by Springer. This book was released on 1985-01-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Reaction Engineering of Dispersed Systems written by Werner Pauer and published by Springer. This book was released on 2018-11-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science.The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics.Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
Download or read book Polymeric Stabilization of Colloidal Dispersions written by Donald H. Napper and published by . This book was released on 1983 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloid and Interface Science in Pharmaceutical Research and Development written by Hiroyuki Ohshima and published by Elsevier. This book was released on 2014-07-23 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and Interface Science in Pharmaceutical Research and Development describes the role of colloid and surface chemistry in the pharmaceutical sciences. It gives a detailed account of colloid theory, and explains physicochemical properties of the colloidal-pharmaceutical systems, and the methods for their measurement. The book starts with fundamentals in Part I, covering fundamental aspects of colloid and interface sciences as applied to pharmaceutical sciences and thus should be suitable for teaching. Parts II and III treat applications and measurements, and they explains the application of these properties and their influence and use for the development of new drugs. - Provides a clear description of the fundamentals of colloid and interface science relevant to drug research and development - Explains the physicochemical/colloidal basis of pharmaceutical science - Lists modern experimental characterization techniques, provides analytical equations and explanations on analyzing the experimental data - Describes the most advanced techniques, AFM (Atomic Force Microscopy), SFA (Surface Force Apparatus) in detail
Download or read book An Introduction to Polymer Colloids written by Françoise Candau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in the subject of Polymer Colloids over the last twenty five years or so has been very large resulting now in major international conferences on an annual basis and many national ones as well. The interest stems not only from the wide range of applications of these materials but also from a curiosity as to the mechanism of formation and their growing use as model particles to investigate fundamental aspects of physics and chemistry. In July 1988 a NATO Advanced Study Institute was held in Strasbourg, France, at the Centre St. Thomas. As an educational introduction to this I nstitute a series of eight lectures was given to cover the fundamental aspects of the subject. These eight lectures have now been compiled into an Introductory Text covering, emulsion poly merization, dispersion polymerization, inverse emulsion polymerization, the morphology of copolymer latices, the colloidal properties of latices, characterization methods and rheology. It is hoped that these will serve a wide audience, undergraduates, graduate-students and research workers, both in industry and academe. The chapters all contain review material up to date at the time of publication. fhe 1988 NATO Advanced Study I nstitute was made possible by a grant from the NATO-AS I programme and the following companies: BASF, Ludwigshafen, West Germany The Dow Chemical Company, Michigan, USA Dow Chemical Rheinwerk GmbH, Rheinmunster, West Germany ICI PLC, Runcorn, England S. C. Johnson and Son Inc., Racine, USA NORSOLOR, Verneuil en Halatte, France Rhone Poulenc, Aubervilliers, France.
Download or read book Polymer Colloids written by Eric S. Daniels and published by . This book was released on 2002 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume spans the field of polymer colloids. Many types of latexes are represented, including homopolymers, copolymers, and natural polymers, those made with reactive surfactants and polymeric stabilizers, surface-modified, hybrids and blends. A variety of polymerization processes are described varying from batch to semicontinuous, free radical, and controlled free radical. Dispersion and suspensions are also presented. Polymerization kinetics, on-line monitoring, and control are also included.
Download or read book Colloids in Paints written by Tharwat F. Tadros and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first modern approach to relate fundamental research to the applied science of colloids, this series bridges academic research and practical applications, thus providing the information vital to both. Written by the very best scientists in their respective disciplines, this volume describes the role of colloids in paints, highlighting the importance of fundamental research in industrial applications. For surface, polymer and physicochemists, materials scientists, and chemical engineers.
Download or read book Polymers at Interfaces written by Gerard Fleer and published by Springer Science & Business Media. This book was released on 1993-09-30 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the configuration of polymers at the interfacial zone between two other phases or immiscible components. In recent years, developments in technology combined with increased attention from specialists in a wide range of fields have resulted in a considerable increase in our understanding of the behavior of polymers at interfaces. Inevitably these advances have generated a wealth of literature and although there have been numerous reviews, a critical treatment with adequate descriptions of both theory and experiment, including detailed analysis of the two, has been missing. This text hopes to fill this gap, providing a timely and comprehensive account of the field as it stands today. This long needed work will be invaluable to experts as well as newcomers in the broad field of polymers, interfaces and colloids, both in industry and academia. Whilst industrial laboratories involved in this field will find it indispensable, it will be equally important to anyone with an interest in interfacial polymer or colloidal research.
Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.
Download or read book Colloids and Colloid Assemblies written by Frank Caruso and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by outstanding experts in the colloids field, this book deals with the recent developments in the synthesis, modification, utilization and application of colloids. The types covered range from metal nanoparticles through to inorganic particles and polymer latexes. Strategies for their modification to impart new properties will be outlined and ordered assemblies derived from colloid particles and some applications for colloids are shown. A multidisciplinary audience spread throughout academia and industry alike will certainly appreciate this first concise collection of knowledge in book form for this topic.
Download or read book Magnetic Nanoparticles in Human Health and Medicine written by Costica Caizer and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nanoparticles in Human Health and Medicine Explores the application of magnetic nanoparticles in drug delivery, magnetic resonance imaging, and alternative cancer therapy Magnetic Nanoparticles in Human Health and Medicine addresses recent progress in improving diagnosis by magnetic resonance imaging (MRI) and using non-invasive and non-toxic magnetic nanoparticles for targeted drug delivery and magnetic hyperthermia. Focusing on cancer diagnosis and alternative therapy, the book covers both fundamental principles and advanced theoretical and experimental research on the magnetic properties, biocompatibilization, biofunctionalization, and application of magnetic nanoparticles in nanobiotechnology and nanomedicine. Chapters written by a panel of international specialists in the field of magnetic nanoparticles and their applications in biomedicine cover magnetic hyperthermia (MHT), MRI contrast agents, biomedical imaging, modeling and simulation, nanobiotechnology, toxicity issues, and more. Readers are provided with accurate information on the use of magnetic nanoparticles in diagnosis, drug delivery, and alternative cancer therapeutics—featuring discussion of current problems, proposed solutions, and future research directions. Topics include current applications of magnetic iron oxide nanoparticles in nanomedicine and alternative cancer therapy: drug delivery, magnetic resonance imaging, superparamagnetic hyperthermia as alternative cancer therapy, magnetic hyperthermia in clinical trials, and simulating the physics of magnetic particle heating for cancer therapy. This comprehensive volume: Covers both general research on magnetic nanoparticles in medicine and specific applications in cancer therapeutics Discusses the use of magnetic nanoparticles in alternative cancer therapy by magnetic and superparamagnetic hyperthermia Explores targeted medication delivery using magnetic nanoparticles as a future replacement of conventional techniques Reviews the use of MRI with magnetic nanoparticles to increase the diagnostic accuracy of medical imaging Magnetic Nanoparticles in Human Health and Medicine is a valuable resource for researchers in the fields of nanomagnetism, magnetic nanoparticles, nanobiomaterials, nanobioengineering, biopharmaceuticals nanobiotechnologies, nanomedicine, and biopharmaceuticals, particularly those focused on alternative cancer diagnosis and therapeutics.
