Download or read book Polyethylene Furanoate Production from Glucose Cost Analysis PEF E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production starting from glucose and monoethylene glycol (MEG). The process examined is similar to the Avantium YXY process, followed by a process that copolymerizes FDCA and MEG. In this process, a 70 wt% glucose-water syrup feed is isomerized to fructose. Then, fructose is converted to methoxy methyl furan (MMF) intermediate, which is oxidized to FDCA. This process generates methyl acetate and methyl levulinate as by-products. The FDCA generated and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF. This report was developed based essentially on the following reference(s): (1) US Patent 8519167, issued to Furanix Technologies B.V. in 2013 (2) US Patent 20160024039, issued to Furanix Technologies B.V. in 2016 (3) WO Patent 2015137807, issued to Furanix Technologies in 2015 Keywords: Polyethylene Furanoate, PEF, Green FDCA, Hydroxyl Methyl Furfural, HMF, Purified Terephthalic Acid, Polyethylene 2,5-Furandicarboxylate, MEG

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.

Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.

Download or read book Toxicity Testing in the 21st Century written by National Research Council and published by National Academies Press. This book was released on 2007-10-05 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in molecular biology and toxicology are paving the way for major improvements in the evaluation of the hazards posed by the large number of chemicals found at low levels in the environment. The National Research Council was asked by the U.S. Environmental Protection Agency to review the state of the science and create a far-reaching vision for the future of toxicity testing. The book finds that developing, improving, and validating new laboratory tools based on recent scientific advances could significantly improve our ability to understand the hazards and risks posed by chemicals. This new knowledge would lead to much more informed environmental regulations and dramatically reduce the need for animal testing because the new tests would be based on human cells and cell components. Substantial scientific efforts and resources will be required to leverage these new technologies to realize the vision, but the result will be a more efficient, informative and less costly system for assessing the hazards posed by industrial chemicals and pesticides.

Download or read book Engineering Applications of Nanotechnology written by Viswanatha Sharma Korada and published by Springer. This book was released on 2017-01-09 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the use of nanotechnology in several fields of engineering. Among others, the reader will find valuable information as to how nanotechnology can aid in extending the life of component materials exposed to corrosive atmospheres, in thermal fluid energy conversion processes, anti-reflection coatings on photovoltaic cells to yield enhanced output from solar cells, in connection with friction and wear reduction in automobiles, and buoyancy suppression in free convective heat transfer. Moreover, this unique resource presents the latest research on nanoscale transport phenomena and concludes with a look at likely future trends.

Download or read book Medicinal Chemistry and Pharmacological Potential of Fullerenes and Carbon Nanotubes written by Franco Cataldo and published by Springer Science & Business Media. This book was released on 2008-09-08 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fullerenes and nanotubes are two classes of carbon structures or allotropes, which were discovered about 17 years ago. Since that time, many chemical derivatives have been synthesized using fullerenes and nanotubes as building blocks. Particularly promising was the theory that the chemical properties of fullerenes, and certain derivatives, made them likely candidates for anticancer drugs, inhibitors of viruses such as HIV, or even as anti-bacterials. Their cyctotoxicity can also be controlled by specific circumstances. In addition, the funtionalization of nanotubes has not only produced relatively simple derivatives, but also complex hybrids with biological macromolecules, which show unique supramolecular architecture and which are promising in many medical applications. The application of fullerenes and nanotubes in medicine is at the frontier of our knowledge, thus the work in this field represents the basis for future novel developments.

Download or read book ICGSCE 2014 written by Md Amin Hashim and published by Springer. This book was released on 2015-06-15 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected papers from the ICGSCE 2014 with focus on the current trends of global resources used to meet the growing demands to improve life style coupled with environmental and social problems related to the resource consumption with emphasize to move towards sustainable development. It provides a platform for scientists and academicians from local and international universities and industries to promote, share and discuss various new issues and developments in different areas of Chemical Engineering with respect to global sustainability. Under the sustainability umbrella the topics covered are; alternative energy sources, alternative feedstock for energy and chemicals, alternative raw materials for household commodity, green process with minimal environmental impact, process intensification, waste minimization, recycling of wastes and providing quality water, food and medicines. Other topics covered include: 1. Oil and gas, Biofuel, Fuel cell, Renewable energy 2. Green technology, Sustainability, Environmental, Carbon sequestration, Carbon footprint, Natural resources 3. Chemical processes, Separation technology, Biotechnology, Nanotechnology, Food technology, Particle technology, Corrosion, Pharmaceutical, Phytochemical, Oleochemical 4. Process modeling, Process Simulation, Process control 5. Advanced material, Polymer, Catalyst, Enzyme 6. Policy, Regulations, Strategy and implementation, Safety, Management of science, Engineering education 7. Process Safety and Loss Prevention, Environmental and chemical risk assessment, Transportation risk analysis, Inherent safety.

Download or read book Bioactive Natural Products written by Steven M. Colegate and published by CRC Press. This book was released on 2007-12-14 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioactive natural products are proving to be a rich source of novel therapeutics to both protect against and combat diseases, as well as serve as lead compounds in crop protection. Following the successful format of the first edition, this volume brings together collective research from many new contributors and emphasizes the rationale behind the

Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015; (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG

Download or read book Polyethylene Furanoate Production from Raw Sugar Cost Analysis PEF E31B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production starting from raw sugar and monoethylene glycol (MEG). The process examined is similar to the Avantium YXY process, followed by a process that copolymerizes FDCA and MEG. In this process, a raw sugar (sucrose) is inverted to glucose and fructose. The glucose is isomerized to fructose. Then, fructose is converted to methoxy methyl furan (MMF) intermediate, which is oxidized to FDCA. This process generates methyl acetate and methyl levulinate as by-products. The FDCA generated and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF. This report was developed based essentially on the following reference(s): (1) US Patent 8519167, issued to Furanix Technologies B.V. in 2013 (2) US Patent 20160024039, issued to Furanix Technologies B.V. in 2016 (3) WO Patent 2015137807, issued to Furanix Technologies in 2015 Keywords: Polyethylene Furanoate, PEF, Green FDCA, Hydroxyl Methyl Furfural, HMF, Purified Terephthalic Acid, Polyethylene 2,5-Furandicarboxylate, MEG

Download or read book IPCS Risk Assessment Terminology written by International Program on Chemical Safety and published by World Health Organization. This book was released on 2004 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: A joint project of IPCS/OECD. In two parts: Part 1: IPCS/OECD Key Generic Terms used in Chemical Hazard/Risk Assessment. Part 2: IPCS Glossary of Key Exposure Assessment Terminology. IPCS project on the Harmonization of Approaches to the Assessment of Risk from Exposure to Chemicals

Download or read book Basic Principles and Calculations in Chemical Engineering written by David Mautner Himmelblau and published by FT Press. This book was released on 2012 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: Best-selling introductory chemical engineering book - now updated with far more coverage of biotech, nanotech, and green engineering Thoroughly covers material balances, gases, liquids, and energy balances. Contains new biotech and bioengineering problems throughout.

Download or read book Advances in Human Factors and Ergonomics in Healthcare and Medical Devices written by Nancy J. Lightner and published by Springer. This book was released on 2019-06-10 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores how human factors and ergonomic principles are currently transforming healthcare. It reports on the design of systems and devices to improve the quality, safety, efficiency and effectiveness of patient care, and discusses findings on improving organizational outcomes in the healthcare setting, as well as approaches to analyzing and modeling those work aspects that are unique to healthcare. Based on papers presented at the AHFE 2019 International Conference on Human Factors and Ergonomics in Healthcare and Medical Devices, held on July 24–28, 2019, in Washington, DC, USA, the book highlights the physical, cognitive and organizational aspects of human factors and ergonomic applications, and shares various perspectives, including those of clinicians, patients, health organizations, and insurance providers. Given its scope, the book offers a timely reference guide for researchers involved in the design of medical systems, and healthcare professionals managing healthcare settings, as well as healthcare counselors and international health organizations.