Download or read book Poly Quasi and Rank One Convexity in Applied Mechanics written by Jörg Schröder and published by Springer Science & Business Media. This book was released on 2010-08-04 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generalized convexity conditions play a major role in many modern mechanical applications. They serve as the basis for existence proofs and allow for the design of advanced algorithms. Moreover, understanding these convexity conditions helps in deriving reliable mechanical models. The book summarizes the well established as well as the newest results in the field of poly-, quasi and rank-one convexity. Special emphasis is put on the construction of anisotropic polyconvex energy functions with applications to biomechanics and thin shells. In addition, phase transitions with interfacial energy and the relaxation of nematic elastomers are discussed.
Download or read book Mathematical Methods in Continuum Mechanics of Solids written by Martin Kružík and published by Springer. This book was released on 2019-03-02 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on rigorous mathematical formulation and treatment of static problems arising in continuum mechanics of solids at large or small strains, as well as their various evolutionary variants, including thermodynamics. As such, the theory of boundary- or initial-boundary-value problems for linear or quasilinear elliptic, parabolic or hyperbolic partial differential equations is the main underlying mathematical tool, along with the calculus of variations. Modern concepts of these disciplines as weak solutions, polyconvexity, quasiconvexity, nonsimple materials, materials with various rheologies or with internal variables are exploited. This book is accompanied by exercises with solutions, and appendices briefly presenting the basic mathematical concepts and results needed. It serves as an advanced resource and introductory scientific monograph for undergraduate or PhD students in programs such as mathematical modeling, applied mathematics, computational continuum physics and engineering, as well as for professionals working in these fields.
Download or read book Plasticity and Beyond written by Jörg Schröder and published by Springer Science & Business Media. This book was released on 2013-09-20 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the latest findings in experimental plasticity, crystal plasticity, phase transitions, advanced mathematical modeling of finite plasticity and multi-scale modeling. The associated algorithmic treatment is mainly based on finite element formulations for standard (local approach) as well as for non-standard (non-local approach) continua and for pure macroscopic as well as for directly coupled two-scale boundary value problems. Applications in the area of material design/processing are covered, ranging from grain boundary effects in polycrystals and phase transitions to deep-drawing of multiphase steels by directly taking into account random microstructures.
Download or read book Trends in Applications of Mathematics to Mechanics written by Elisabetta Rocca and published by Springer. This book was released on 2018-04-27 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from the INDAM Symposium on Trends on Applications of Mathematics to Mechanics (STAMM), which was held at the INDAM headquarters in Rome on 5–9 September 2016. It brings together original contributions at the interface of Mathematics and Mechanics. The focus is on mathematical models of phenomena issued from various applications. These include thermomechanics of solids and gases, nematic shells, thin films, dry friction, delamination, damage, and phase-field dynamics. The papers in the volume present novel results and identify possible future developments. The book is addressed to researchers involved in Mathematics and its applications to Mechanics.
Download or read book Variational Views in Mechanics written by Paolo Maria Mariano and published by Springer Nature. This book was released on 2022-02-08 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a timely survey of interactions between the calculus of variations and theoretical and applied mechanics. Chapters have been significantly expanded since preliminary versions appeared in a special issue of the Journal of Optimization Theory and Applications (184(1), 2020) on “Calculus of Variations in Mechanics and Related Fields”. The variety of topics covered offers researchers an overview of problems in mechanics that can be analyzed with variational techniques, making this a valuable reference for researchers in the field. It also presents ideas for possible future areas of research, showing how the mastery of these foundational mathematical techniques can be used for many exciting applications. Specific topics covered include: Topology optimization Identification of material properties Optimal control Plastic flows Gradient polyconvexity Obstacle problems Quasi-monotonicity Variational Views in Mechanics will appeal to researchers in mathematics, solid-states physics, and mechanical, civil, and materials engineering.
Download or read book Adhesive Joints written by Wulff Possart and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of adhesive bonding, providing both basic knowledge of polymer adhesives as well as insights into their mechanical and ageing properties. The book is unique in its up-to-date, self-contained summary of recent developments and in its integration of the theory, synthesis and mechanical properties of adhesive joints as well as their applications. Well-structured throughout, the first chapter introduces the initial state of adhesive joints and their formation, while subsequent chapters discuss the ageing and failure as well as the weathering of adhesive joints. In addition the issue of long-term behavior and lifetime predictions are considered. The text is rounded off by a look at future technological advances. The result is an essential reference for a wide range of disciplines
Download or read book Constitutive Modelling and Failure Prediction for Silicone Adhesives in Fa ade Design written by Michael Drass and published by Springer Nature. This book was released on 2020-02-21 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an elementary understanding of the material behavior of structural silicones in façades. Based on extensive experimental investigations on a transparent structural silicone adhesive (TSSA), the material behavior, failure, and microscopic effects such as stress whitening, cavitation failure, and the Mullins effect are analyzed. In turn, novel hyperelastic material models are developed to account for nonlinear material behavior under arbitrary deformations. The development of a volumetric hyperelastic model makes it possible for the first time to approximate the structural behavior of TSSA under constrained tensile load and cavitation. The material models discussed here were implemented in a finite element code for validation, and their quality was confirmed by three-dimensional numerical simulations, in which an additional stretch-based failure criterion was evaluated for failure prediction. The numerical studies are in good agreement with the experimental results.
Download or read book Mathematical Elasticity written by Philippe G. Ciarlet and published by SIAM. This book was released on 2022-01-22 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of a three-volume set, Three-Dimensional Elasticity covers the modeling and mathematical analysis of nonlinear three-dimensional elasticity. It includes the known existence theorems, either via the implicit function theorem or via the minimization of the energy (John Ball’s theory). An extended preface and extensive bibliography have been added to highlight the progress that has been made since the volume’s original publication. While each one of the three volumes is self-contained, together the Mathematical Elasticity set provides the only modern treatise on elasticity; introduces contemporary research on three-dimensional elasticity, the theory of plates, and the theory of shells; and contains proofs, detailed surveys of all mathematical prerequisites, and many problems for teaching and self-study. These classic textbooks are for advanced undergraduates, first-year graduate students, and researchers in pure or applied mathematics or continuum mechanics. They are appropriate for courses in mathematical elasticity, theory of plates and shells, continuum mechanics, computational mechanics, and applied mathematics in general.
Download or read book Shell Structures Theory and Applications Vol 2 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2009-09-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shell Structures. Theory and Applications, Volume 2 contains 77 contributions from over 17 countries, reflecting a wide spectrum of scientific and engineering problems of shell structures. The papers are divided into six broad groups: 1. General lectures; 2. Theoretical modeling; 3. Stability; 4. Dynamics; 5. Numerical analysis; 6. Engineering
Download or read book The Role of Mechanics in the Study of Lipid Bilayers written by David J. Steigmann and published by Springer. This book was released on 2017-05-23 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first collection of lipid-membrane research conducted by leading mechanicians and experts in continuum mechanics. It brings the overall intellectual framework afforded by modern continuum mechanics to bear on a host of challenging problems in lipid membrane physics. These include unique and authoritative treatments of differential geometry, shape elasticity, surface flow and diffusion, interleaf membrane friction, phase transitions, electroelasticity and flexoelectricity, and computational modelling.
Download or read book Dynamics Strength of Materials and Durability in Multiscale Mechanics written by Francesco dell'Isola and published by Springer Nature. This book was released on 2020-11-01 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the mathematical modeling and experimental study of systems involving two or more different length scales. The effects of phenomena occurring at the lower length scales on the behavior at higher scales are of intrinsic scientific interest, but can also be very effectively used to determine the behavior at higher length scales or at the macro-level. Efforts to exploit this micro- and macro-coupling are, naturally, being pursued with regard to every aspect of mechanical phenomena. This book focuses on the changes imposed on the dynamics, strength of materials and durability of mechanical systems by related multiscale phenomena. In particular, it addresses: 1: the impacts of effective dissipation due to kinetic energy trapped at lower scales 2: wave propagation in generalized continua 3: nonlinear phenomena in metamaterials 4: the formalization of more general models to describe the exotic behavior of meta-materials 5: the design and study of microstructures aimed at increasing the toughness and durability of novel materials
Download or read book Canonical Duality Theory written by David Yang Gao and published by Springer. This book was released on 2017-10-09 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on canonical duality theory provides a comprehensive review of its philosophical origin, physics foundation, and mathematical statements in both finite- and infinite-dimensional spaces. A ground-breaking methodological theory, canonical duality theory can be used for modeling complex systems within a unified framework and for solving a large class of challenging problems in multidisciplinary fields in engineering, mathematics, and the sciences. This volume places a particular emphasis on canonical duality theory’s role in bridging the gap between non-convex analysis/mechanics and global optimization. With 18 total chapters written by experts in their fields, this volume provides a nonconventional theory for unified understanding of the fundamental difficulties in large deformation mechanics, bifurcation/chaos in nonlinear science, and the NP-hard problems in global optimization. Additionally, readers will find a unified methodology and powerful algorithms for solving challenging problems in complex systems with real-world applications in non-convex analysis, non-monotone variational inequalities, integer programming, topology optimization, post-buckling of large deformed structures, etc. Researchers and graduate students will find explanation and potential applications in multidisciplinary fields.
Download or read book Nonlocal Modeling Analysis and Computation written by Qiang Du and published by SIAM. This book was released on 2019-03-20 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of complexity, singularity, and anomaly using nonlocal continuum models are steadily gaining popularity. This monograph provides an introduction to basic analytical, computational, and modeling issues and to some of the latest developments in these areas. Nonlocal Modeling, Analysis, and Computation includes motivational examples of nonlocal models, basic building blocks of nonlocal vector calculus, elements of theory for well-posedness and nonlocal spaces, connections to and coupling with local models, convergence and compatibility of numerical approximations, and various applications, such as nonlocal dynamics of anomalous diffusion and nonlocal peridynamic models of elasticity and fracture mechanics. A particular focus is on nonlocal systems with a finite range of interaction to illustrate their connection to local partial differential equations and fractional PDEs. These models are designed to represent nonlocal interactions explicitly and to remain valid for complex systems involving possible singular solutions and they have the potential to be alternatives for as well as bridges to existing models. The author discusses ongoing studies of nonlocal models to encourage the discovery of new mathematical theory for nonlocal continuum models and offer new perspectives on traditional models, analytical techniques, and algorithms.
Download or read book Lecture Notes on the Theory of Plates and Shells written by David J. Steigmann and published by Springer Nature. This book was released on 2023-02-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of plates and shells on the basis of the three-dimensional parent theory. The authors explore the thinness of the structure to represent the mechanics of the actual thin three-dimensional body under consideration by a more tractable two-dimensional theory associated with an interior surface. In this way, the relatively complex three-dimensional continuum mechanics of the thin body is replaced by a far more tractable two-dimensional theory. To ensure that the resulting model is predictive, it is necessary to compensate for this ‘dimension reduction’ by assigning additional kinematical and dynamical descriptors to the surface whose deformations are modelled by the simpler two-dimensional theory. The authors avoid the various ad hoc assumptions made in the historical development of the subject, most notably the classical Kirchhoff–Love hypothesis requiring that material lines initially normal to the shell surface remain so after deformation. Instead, such conditions, when appropriate, are here derived rather than postulated.
Download or read book Mathematical Modelling of Continuum Physics written by Angelo Morro and published by Springer Nature. This book was released on 2023-03-19 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a comprehensive and self-contained treatment of continuum physics, illustrating a systematic approach to the constitutive equations for wide-ranging classes of materials. Derivations of results are detailed through careful proofs, and the contents have been developed to ensure a self-contained and consistent presentation. Part I reviews the kinematics of continuous bodies and illustrates the general setting of balance laws. Essential preliminaries to continuum physics – such as reference and current configurations, transport relations, singular surfaces, objectivity, and objective time derivatives – are covered in detail. A chapter on balance equations then develops the balance laws of mass, linear momentum, angular momentum, energy, and entropy, as well as the balance laws in electromagnetism. Part II is devoted to the general requirements on constitutive models, emphasizing the application of objectivity and consistency with the second law of thermodynamics. Common models of simple materials are then reviewed, and in this framework, detailed descriptions are given of solids (thermoelastic, elastic, and dissipative) and fluids (elastic, thermoelastic, viscous, and Newtonian). A wide of variety of constitutive models are investigated in Part III, which consists of separate chapters focused on several types of non-simple materials: materials with memory, aging and higher-order grade materials, mixtures, micropolar media, and porous materials. The interaction of the electromagnetic field with deformation is also examined within electroelasticity, magnetoelasticity, and plasma theory. Hysteretic effects and phase transitions are considered in Part IV. A new approach is established by treating entropy production as a constitutive function in itself, as is the case for entropy and entropy flux. This proves to be conceptually and practically advantageous in the modelling of nonlinear phenomena, such as those occurring in hysteretic continua (e.g., plasticity, electromagnetism, and the physics of shape memory alloys). Mathematical Modelling of Continuum Physics will be an important reference for mathematicians, engineers, physicists, and other scientists interested in research or applications of continuum mechanics.
Download or read book Internal Variables in Thermoelasticity written by Arkadi Berezovski and published by Springer. This book was released on 2017-05-05 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an effective method for modeling advanced materials like polymers, composite materials and biomaterials, which are, as a rule, inhomogeneous. The thermoelastic theory with internal variables presented here provides a general framework for predicting a material’s reaction to external loading. The basic physical principles provide the primary theoretical information, including the evolution equations of the internal variables. The cornerstones of this framework are the material representation of continuum mechanics, a weak nonlocality, a non-zero extra entropy flux, and a consecutive employment of the dissipation inequality. Examples of thermoelastic phenomena are provided, accompanied by detailed procedures demonstrating how to simulate them.
Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.