Download or read book Pocket Decomposition using DN and HARI Number A Novel Approach written by Divyangkumar Patel and published by GRIN Verlag. This book was released on 2018-03-12 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2016 in the subject Engineering - Mechanical Engineering, grade: Distinction, Sardar Vallabhbhai National Institute of Technology, language: English, abstract: A 2.5D pocket milling is extensively used in aerospace, shipyard, automobile, dies and molds industries. In machining of 2.5D pockets, directional parallel tool-path and contour parallel tool-path are widely used. However, these tool paths significantly limit the machining efficiency. In the present work, an attempt has been made to generate a spiral tool path for machining of 2.5D star-shaped pocket for improving machining efficiency. The spiral tool path is developed using second order elliptic partial differential equation (PDE) and it is free from sharp corners inside the pocket region. Further, the implementation of proposed method is presented on complex non-star-shaped polygon, pocket bounded by free-form curve and pocket with island. The shape of pocket geometry, tool path strategy and various machining parameters (speed, feed rate and depth of cut) affect machining performance. However, the effect of the shape of a pocket geometry and tool path strategy on the performance of pocket machining is scarcely reported. Hence, an attempt has been made to investigate the effect of aspect ratio, feed rate and tool path strategies (zig-zag, spiral and contour parallel) on tool path length, cutting time, percentage utilization of a tool and average surface roughness in machining of AISI 304 stainless steel using design of experiments (DOE). From the findings of above experimental investigation, it was anticipated that there is a need to develop a method (or technique) for comparing different pocket geometry quantitatively and predict the effect of pocket geometry on pocket machining. A novel approach is reported for quantitative comparison of different pocket geometries using a dimensionless number, Divyang Number (DN). The concept and formula of DN are developed and DN is calculated for various pocket geometries. The guidelines for comparing pocket geometries based on DN and PUT (percentage utilization of tool) are reported. The results show that DN can be used to predict the quality of tool path prior to tool path generation. Further, an algorithm to decompose pocket geometry (parent geometry) into sub-geometries is developed that improves the efficiency of spiral tool path for bottle-neck pockets using HARI Number. The results indicate that decomposing pocket geometry with the new algorithm improves HARIN and removes the effect of bottle-necks. Furthermore, the algorithm for decomposition is extended for pockets that are bounded by free-form curves.
Download or read book Organic Matter and Rice written by and published by Int. Rice Res. Inst.. This book was released on 1984 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.
Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.
Download or read book UNDERSTANDING CLEAN ENERGY AND FUELS FROM BIOMASS written by Dr. H.S. Mukunda and published by . This book was released on 2011-04-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Features: · Foreword by Prof. C.N.R. Rao, National Research Professor and Linus Pauling Research Professor & Chairman, Scientific Advisory Council to the Prime Minister, Jawaharlal Centre for Advanced Scientific Research, Bangalore.· Excellent authorship.· This book is an authoritative source for understanding the subject of the clean conversion of biomass to energy and upgraded fuels - gases and liquids for heat, electricity and transportation from the vantage point of developing countries like India and other oil importing nations bestowed with bio-resource. · There is no book that addresses the progress in the science and technology of modern approaches to conversion of biomass to energy and clean fuels with developing country context in mind. The books available today are also not of a nature that approaches the subject from the view point of fundamentals particularly with reference to new technologies. · Summary and questions at the end of each chapter.· Numerous illustrations. About The Book: This book is an authoritative source for understanding the subject of the clean conversion of biomass to energy and upgraded fuels - gases and liquids for heat, electricity and transportation from the vantage point of developing countries like India and other oil importing nations bestowed with bio-resource. It aims at creating an understanding of (a) the magnitude and nature of biomass resources for energy and fuels, largely for India, (b) the variety of processes that are available for conversion of the wastes into energy or fuels, (c) the processes, both microbial (anaerobic digestion) and thermo-chemical (combustion and gasification) and a critical assessment of the performance on a technical and environmental basis addressing those approaches that make greater importance in terms of scale to developing countries like India, (d) processes that have not reached the commercial relevance yet - like Stirling engine, fuel cells, in particular direct carbon fuel cell and microbial fuel cell and could become relevant in coming times, (e) the routes for liquid bio-fuels - first generation fuels like ethanol and plant oils as well as second generation fuels such as cellulosic ethanol and gasification -Fischer-Tropsch synthesis based biodiesel.
Download or read book Biomass for Renewable Energy Fuels and Chemicals written by Donald L. Klass and published by Elsevier. This book was released on 1998-07-06 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass for Renewable Energy, Fuels, and Chemicals serves as a comprehensive introduction to the subject for the student and educator, and is useful for researchers who are interested in the technical details of biomass energy production. The coverage and discussion are multidisciplinary, reflecting the many scientific and engineering disciplines involved. The book will appeal to a broad range of energy professionals and specialists, farmers and foresters who are searching for methods of selecting, growing, and converting energy crops, entrepreneurs who are commercializing biomass energy projects, and those involved in designing solid and liquid waste disposal-energy recovery systems. Presents a graduated treatment from basic principles to the details of specific technologies Includes a critical analysis of many biomass energy research and commercialization activities Proposes several new technical approaches to improve efficiencies, net energy production, and economics Reviews failed projects, as well as successes, and methods for overcoming barriers to commercialization Written by a leader in the field with 40 years of educational, research, and commercialization experience
Download or read book A Textbook of Agronomy written by B. Chandrasekaran and published by New Age International. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An introduction to the theory of numbers written by Ivan Niven and published by . This book was released on 1993 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Networks of the Brain written by Olaf Sporns and published by MIT Press. This book was released on 2016-02-12 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integrative overview of network approaches to neuroscience explores the origins of brain complexity and the link between brain structure and function. Over the last decade, the study of complex networks has expanded across diverse scientific fields. Increasingly, science is concerned with the structure, behavior, and evolution of complex systems ranging from cells to ecosystems. In Networks of the Brain, Olaf Sporns describes how the integrative nature of brain function can be illuminated from a complex network perspective. Highlighting the many emerging points of contact between neuroscience and network science, the book serves to introduce network theory to neuroscientists and neuroscience to those working on theoretical network models. Sporns emphasizes how networks connect levels of organization in the brain and how they link structure to function, offering an informal and nonmathematical treatment of the subject. Networks of the Brain provides a synthesis of the sciences of complex networks and the brain that will be an essential foundation for future research.
Download or read book The Self begetting Novel written by Steven G. Kellman and published by Columbia University Press. This book was released on 1980 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fibrous Proteins Structures and Mechanisms written by David A.D. Parry and published by Springer. This book was released on 2017-01-18 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the readers with an up-to-date review of the design, structure and function of a representative selection of fibrous proteins in both health and disease. The importance of the α-helical coiled coil, a conformational motif based on the heptad repeat in the amino acid sequence of all α-fibrous proteins (and parts of some globular proteins) is underlined by three Chapters devoted to its design, structure, function and topology. Specific proteins covered in the text and which depend on the coiled coil for their structure and function, include the intermediate filament proteins, tropomyosin, myosin, paramyosin, fibrin and members of the spectrin superfamily. Also described are fibrous proteins based on the β-pleated sheet and collagen conformations. Recombinant structural proteins, especially of silk and collagen, are discussed in the context of developing new biomaterials with varied applications. Established researchers and postgraduate students in the fields of protein chemistry, biochemistry and structural biophysics will find Fibrous Proteins: Structures and Mechanisms to be an invaluable collection of topical reviews that describe the basic advances made in the field of fibrous proteins over the past decade. This book, written by recognized authorities in the field, provides a clear account of the current status of fibrous protein research and, in addition, establishes the basis for deciding the most appropriate directions for future activity, including the applications of protein engineering and the commercial exploitation of new biomaterials.
Download or read book Biological Diversity Current Status and Conservation Policies written by Vinod Kumar and published by Agro Environ Media, Publication Cell of AESA, Agriculture and Environmental Science Academy,. This book was released on 2021-10-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book has been designed to bind prime knowledge of climate change-induced impacts on various aspects of our environment and its biological diversity. The book also contains updated information, methods and tools for the monitoring and conservation of impacted biological diversity.
Download or read book The Delivery of Nanoparticles written by Abbass A. Hashim and published by BoD – Books on Demand. This book was released on 2012-05-16 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle is a general challenge for today's technology and the near future observations of science. Nanoparticles cover mostly all types of sciences and manufacturing technologies. The properties of this particle are flying over today scientific barriers and have passed the limitations of conventional sciences. This is the reason why nanoparticles have been evaluated for the use in many fields. InTech publisher and the contributing authors of this book in nanoparticles are all overconfident to invite all scientists to read this new book. The book's potential was held until it was approached by the art of exploring the most advanced research in the field of nano-scale particles, preparation techniques and the way of reaching their destination. 25 reputable chapters were framed in this book and there were alienated into four altered sections; Toxic Nanoparticles, Drug Nanoparticles, Biological Activities and Nano-Technology.
Download or read book Biodiversity and Human Health written by Francesca Grifo and published by Island Press. This book was released on 1997-02-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implications of biodiversity loss for the global environment have been widely discussed, but only recently has attention been paid to its direct and serious effects on human health. Biodiversity loss affects the spread of human diseases, causes a loss of medical models, diminishes the supplies of raw materials for drug discovery and biotechnology, and threatens food production and water quality. Biodiversity and Human Health brings together leading thinkers on the global environment and biomedicine to explore the human health consequences of the loss of biological diversity. Based on a two-day conference sponsored by the National Institutes of Health, the National Science Foundation, and the Smithsonian Institution, the book opens a dialogue among experts from the fields of public health, biology, epidemiology, botany, ecology, demography, and pharmacology on this vital but often neglected concern. Contributors discuss the uses and significance of biodiversity to the practice of medicine today, and develop strategies for conservation of these critical resources. Topics examined include: the causes and consequences of biodiversity loss emerging infectious diseases and the loss of biodiversity the significance and use of both prescription and herbal biodiversity-derived remedies indigenous and local peoples and their health care systems sustainable use of biodiversity for medicine an agenda for the future In addition to the editors, contributors include Anthony Artuso, Byron Bailey, Jensa Bell, Bhaswati Bhattacharya, Michael Boyd, Mary S. Campbell, Eric Chivian, Paul Cox, Gordon Cragg, Andrew Dobson, Kate Duffy-Mazan, Robert Engelman, Paul Epstein, Alexandra S. Fairfield, John Grupenhoff, Daniel Janzen, Catherine A. Laughin, Katy Moran, Robert McCaleb, Thomas Mays, David Newman, Charles Peters, Walter Reid, and John Vandermeer. The book provides a common framework for physicians and biomedical researchers who wish to learn more about environmental concerns, and for members of the environmental community who desire a greater understanding of biomedical issues.
Download or read book Chemical Rocket Propulsion written by Luigi T. De Luca and published by Springer. This book was released on 2016-08-19 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed and expanded from the work presented at the New Energetic Materials and Propulsion Techniques for Space Exploration workshop in June 2014, this book contains new scientific results, up-to-date reviews, and inspiring perspectives in a number of areas related to the energetic aspects of chemical rocket propulsion. This collection covers the entire life of energetic materials from their conceptual formulation to practical manufacturing; it includes coverage of theoretical and experimental ballistics, performance properties, as well as laboratory-scale and full system-scale, handling, hazards, environment, ageing, and disposal. Chemical Rocket Propulsion is a unique work, where a selection of accomplished experts from the pioneering era of space propulsion and current technologists from the most advanced international laboratories discuss the future of chemical rocket propulsion for access to, and exploration of, space. It will be of interest to both postgraduate and final-year undergraduate students in aerospace engineering, and practicing aeronautical engineers and designers, especially those with an interest in propulsion, as well as researchers in energetic materials.
Download or read book Seismic Diffraction written by Tijmen Jan Moser and published by SEG Books. This book was released on 2016-06-30 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diffraction imaging to complement the seismic reflection method is rapidly gaining momentum in the oil and gas industry. As the industry moves toward exploiting smaller and more complex conventional reservoirs and extensive new unconventional resource plays, the application of the seismic diffraction method to image sub-wavelength features such as small-scale faults, fractures and stratigraphic pinchouts is expected to increase dramatically over the next few years. “Seismic Diffraction” covers seismic diffraction theory, modeling, observation, and imaging. Papers and discussion include an overview of seismic diffractions, including classic papers which introduced the potential of diffraction phenomena in seismic processing; papers on the forward modeling of seismic diffractions, with an emphasis on the theoretical principles; papers which describe techniques for diffraction mathematical modeling as well as laboratory experiments for the physical modeling of diffractions; key papers dealing with the observation of seismic diffractions, in near-surface-, reservoir-, as well as crustal studies; and key papers on diffraction imaging.
Download or read book Aromatic Rices written by and published by Int. Rice Res. Inst.. This book was released on 2000 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
