Download or read book Hot and Cold Water Supply written by BSI (The British Standards Institution) and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a highly illustrated guide to the design, installation and maintenance of hot and cold water supply systems for domestic buildings. Based on British Standard BS 6700, the new edition takes into account revisions to the standard since the book was first published in 1991. It has also been updated to give guidance on the 1999 Water Supply Regulations and includes revisions to the Building Regulations. Written for designers and installers, this immensely practical book will also be of interest to technical staff of water undertakers, property services managers and students of NVQ and BTech courses. It was specially commissioned by the British Standards Institution and written for BSI by Bob Garrett, formerly of Langley College of Further Education and past President of the National Association of Plumbing Teachers.
Download or read book Health Aspects of Plumbing written by World Health Organization and published by World Health Organization. This book was released on 2006-03-03 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication describes the processes involved in the design installation and maintenance of modern plumbing systems. It recommends a number of plumbing system design and installation specifications that have demonstrated their validity from years of experience. It also examines the microbiological chemical physical and financial risks associated with plumbing and outlines the major risk management strategies that are used in the plumbing industry and emphasizes the importance of measures to conserve supplies of clean water. This work is dedicated to assisting developing countries in achieving the best possible plumbing levels to ensure the highest health benefits from use of sound plumbing practices. It is aimed at administrators and plumbers working in areas that are served by a mains drinking- water supply or sewerage system or are about to install a mains drinking- water supply or sewerage system. It should be of particular value to those working in countries or areas that are in the early stages of introducing modern plumbing systems. While it draws attention to the problems of drinking- water supply and waste removal in developing countries and outlines some of the strategies currently used it does not systematically cover issues specific to developing countries.
Download or read book Handbook on Pressurized Irrigation Techniques written by Andreas Phocaides and published by Food & Agriculture Org.. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the efficiency of water use and enhancing agricultural water productivity at all levels of the production chains are becoming priorities in a growing number of countries. In particular, shifting to modern on-farm irrigation practices can contribute to a substantial increase in both water use efficiency and water productivity. The objective of this handbook is to provide a practical guide on the use of pressurized irrigation techniques to farmers, irrigation technicians, and extension workers in the field. In this second edition, the handbook has been considerably revised, including new chapters on low-cost drip irrigation and pipe distribution systems for smallholders.--Publisher's description.
Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.
Download or read book Sewer System Infrastructure Analysis and Rehabilitation written by and published by . This book was released on 1991 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Drainage written by David Butler and published by CRC Press. This book was released on 2010-09-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Drainage has been thoroughly revised and updated to reflect changes in the practice and priorities of urban drainage. New and expanded coverage includes: Sewer flooding The impact of climate change Flooding models The move towards sustainability Providing a descriptive overview of the issues involved as well as the engineering principles and analysis, it draws on real-world examples as well as models to support and demonstrate the key issues facing engineers dealing with drainage issues. It also deals with both the design of new drainage systems and the analysis and upgrading of existing infrastructure. This is a unique and essential textbook for students of water, environmental, and public health engineering as well as a valuable resource for practising engineers.
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
Download or read book Thermoplastics Pipes Universal Wall Thickness Table written by British Standards Institute Staff and published by . This book was released on 1997-05 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipes, Thermoplastic polymers, Polymers, Thickness, Thickness measurement, Circular shape, Dimensions, Diameter, Diameter measurement
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Civil Engineer s Reference Book written by L S Blake and published by CRC Press. This book was released on 1994-03-21 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications. A particular feature is the incorporation of chapters on construction and site practice, including contract management and control.
Download or read book The Sanitary Engineer written by and published by . This book was released on 1890 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to the Development of On site Sanitation A written by R. Franceys and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides detailed practical and technical advice intended to guide the selection design construction and maintenance of on-site facilities for the removal of human excreta. Addressed to engineers sanitarians medical officers and project planners the book concentrates on technical options suitable for householders building their own latrines whether in small communities rural areas or deprived urban settlements. Details range from line drawings illustrating features of design and construction through a list of reasons why improved sanitation may elicit negative responses from users to instructi.
Download or read book Plastic Piping Systems written by David A. Chasis and published by Industrial Press Inc.. This book was released on 1988 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: For grades 10-12.
Download or read book Lining of Waste Impoundment and Disposal Facilities written by and published by . This book was released on 1980 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipes and Joints Made of Oriented Unplasticized Poly Vinyl Chloride PVC O for the Conveyance of Water Under Pressure Specifications written by British Standards Institute Staff and published by . This book was released on 1914-02-28 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water supply (buildings), Water supply, Pipes, Pipe couplings, Pipe fittings, Polyvinyl chloride, Thermoplastic polymers, Plastics, Pressure pipes, Water mains, Sewers, Irrigation equipment, Potable water, Quality, Classification systems, Geometry, Tensile strength, Mechanical properties of materials, Sealing rings, Marking
Download or read book Reliability and Maintainability of In Service Pipelines written by Mojtaba Mahmoodian and published by Gulf Professional Publishing. This book was released on 2018-06-13 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Maintainability of In-Service Pipelines helps engineers understand the best structural analysis methods and more accurately predict the life of their pipeline assets. Expanded to cover real case studies from oil and gas, sewer and water pipes, this reference also explains inline inspection and how the practice influences reliability analysis, along with various reliability models beyond the well-known Monte Carlo method. Encompassing both numerical and analytical methods in structural reliability analysis, this book gives engineers a stronger point of reference covering both pipeline maintenance and monitoring techniques in a single resource. - Provides tactics on cost-effective pipeline integrity management decisions and strategy for a variety of different pipes - Presents readers with rational tools for strengthening and rehabing existing pipelines - Teaches how to optimize materials selection and design parameters for designing future pipelines with a longer service life
Download or read book Civil Engineering Objective Type Questions written by S. S. Bhavikatti and published by . This book was released on 2015-06-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all the major topics in civil engineering. Each topic is presented briefly followed by an exhaustive set of objective questions. Coverage ranges from the basic to the advanced. The text includes 3000+ objective type questions; brief descriptions of important theorems; derivations of important functions, relationships and equations; and diagrams and tables to illustrate important concepts.
