Download or read book Plastic Piping Systems written by David A. Chasis and published by Industrial Press Inc.. This book was released on 1988 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: For grades 10-12.
Download or read book Plastics and Environmental Sustainability written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2015-02-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Survey’s the issues typically raised in discussions of sustainability and plastics Discusses current issues not covered in detail previously such as ocean litter, migration of additives into food products and the recovery of plastics Covers post-consumer fate of plastics on land and in the oceans, highlighting the environmental impacts of disposal methods Details toxicity of plastics, particularly as it applies to human health Presents a clear analysis of the key plastic-related issues including numerous citations of the research base that supports and contradicts the popularly held notions
Download or read book Handbook of Polyethylene Pipe written by and published by Plastics Pipe Institute. This book was released on 2012-02 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the Plastics Pipe Institute (PPI), the Handbook describes how polyethylene piping systems continue to provide utilities with a cost-effective solution to rehabilitate the underground infrastructure. The book will assist in designing and installing PE piping systems that can protect utilities and other end users from corrosion, earthquake damage and water loss due to leaky and corroded pipes and joints.
Download or read book The Sustainable Solution Plastic Granulate Production in Action written by Sándor Varga and published by Luxory. This book was released on with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: MONEY FROM TRASH. Plastic waste has become a major environmental concern in today's world. The excessive use of plastic and its improper disposal has led to the pollution of our oceans, landfills, and even our air. However, instead of viewing plastic waste as a problem, we can see it as an opportunity. With the right technology and processes, plastic waste can be transformed into high-quality secondary raw material, which can be used in various industries. This not only helps in reducing the amount of plastic waste in our environment but also creates a new source of income. By turning trash into money, we can incentivize individuals and businesses to properly manage their plastic waste. This could potentially lead to a cleaner and more sustainable future for our planet. Through the efficient processing of plastic waste, we can not only tackle the issue of pollution but also create a circular economy where waste is seen as a valuable resource. It is time for us to rethink our approach towards plastic waste and explore its potential as a secondary raw material.
Download or read book Sustainable Design of Research Laboratories written by KlingStubbins and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architecture, Sustainable Design A comprehensive book on the sustainable design of research laboratories Today's research laboratories are complex and difficult building types to design, and making them sustainable adds more obstacles. Written by members of the well-known firm KlingStubbins, under the guidance of its Directors of Laboratory Planning, Engineering, and Sustainability, Sustainable Design of Research Laboratories represents a multidisciplinary approach to addressing these challenges. With the needs of architects, engineers, construction professionals, and facility owners in mind, this book provides a road map for sustainable planning, design, construction, and operations. The book is valuable both to experienced laboratory designers seeking guidance on sustainable strategies, as well as professionals versed in sustainable design who want insight into laboratory applications. With content rich in guidance on performance strategies, even the most technically oriented reader will find valuable lessons inside. This book: Focuses on the links between best sustainable practices and the specific needs of research laboratories Provides a number of case studies of the best contemporary sustainably designed labs, with a focus on architecture and engineering Explores the challenges in applying rating systems, including LEED, to laboratory buildings Examines unique considerations of sustainable approaches in leased and renovated laboratories Includes contributions by experts on approaches to integrated design, site design, programming, and commissioning This important book shows how theoretical ideas can be applied to real-life laboratory projects to create healthier and more efficient research environments.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by Elsevier. This book was released on 2023-11-24 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Sustainability, Materials, and Applications, Third Edition presents the fundamentals of plastics engineering, helping bring readers up-to-speed on new plastics, materials, processing and technology. This revised and expanded edition includes the latest developments in plastics, including areas such as biodegradable and biobased plastics, plastic waste, smart polymers, and 3D printing. Sections cover traditional plastics, elastomeric materials, bio-based materials, additives, colorants, fillers and plastics processing, including various key technologies, plastic recycling and waste. The final part of the book examines design and applications, with substantial updates made to reflect advancements in technology, regulations, and commercialization. Throughout the handbook, the focus is on engineering aspects of producing and using plastics. Properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Offers an ideal reference for new engineers, experienced practitioners and researchers entering a new field or evaluating a new technology - Provides an authoritative source of practical advice, presenting guidance that will lead to cost savings and process improvements - Includes the latest technology, covering 3D printing, smart polymers and thorough coverage of biobased and biodegradable plastics
Download or read book Plastics and Sustainability written by Lee Tin Sin and published by Elsevier. This book was released on 2022-11-26 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics and Sustainability: Practical Approaches provides a broad overview of sustainability as applied to plastics, offering a range of opportunities and solutions to be applied in an academic or industrial setting. The book begins by introducing the challenges and opportunities relating to plastics and environmental sustainability. This is followed by detailed eco-profiles organized by polymer category. Subsequent chapters explore various approaches to plastics sustainability, with in-depth coverage of incineration technology for energy recovery, pyrolysis for chemical recovery, blending technology, design, packaging, circular economy, and biopolymers. Finally, international policies are summarized. The book aims to provide a broad source of information and a range of options to readers on how to evaluate and improve the sustainability of plastics, with analyses of the advantages and drawbacks of different technologies and materials. Authored by two professional engineers with substantial experience in industry and consultancy, this is a valuable resource for all those looking for a wide-ranging overview of sustainability as applied to plastics, including researchers and advanced students from a range of materials science and engineering disciplines, and engineers, manufacturers, scientists, and R&D professionals from a range of industries. - Offers detailed information on plastics eco-profiles, biopolymers, related challenges, and design and circular economy considerations - Presents the latest processing technologies for plastic waste, covering incineration and energy recovery, pyrolysis and chemical recovery, and blending - Includes practical guidance on recycling technology, supply chain management, costs, societal impact and international policy
Download or read book Plastics and Sustainability written by Michael Tolinski and published by John Wiley & Sons. This book was released on 2011-11-16 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clearly lays out the issues related to plastics' effects on the environment, while also serving as a practical, non-academic guide for making sustainability decisions about plastics recycling and the newest bio-based plastics Company managers, product developers, policy makers, environmental researchers, and plastics industry engineers are under increasing pressure to find ways of minimizing the environmental footprint of plastic products. This accessible book is designed to help readers understand the life-cycle impacts of various plastics, clarifying the technical research and practical arguments to show when bio-based and recycled plastics might be useful options for reducing the overall energy consumption, greenhouse gas emissions, and waste associated with traditional plastics. Plastics and Sustainability compares traditional fossil fuel-based plastics with bio-based plastics in terms of properties, environmental impacts, and costs -- indicating what the most effective approaches could be for using recycled, biodegradable, or various bio-based materials. The book makes objective comparisons between bioplastics and all commonly used plastics, focusing on how they affect production economics, product requirements, and retailer and consumer needs. It incorporates research concerning life-cycle assessment, production techniques, and commercial applications, and presents "green" guidelines about product design, recycling, processing efficiency, and material selection. The book also reports on recent industry developments and commercial trends in an effort to synthesize conclusions that are necessary for finding the right balance between bio-based and fossil-fuel based plastic products. Check out the author's blog at http://www.plastech.biz/blog.
Download or read book A Practical Guide to Plastics Sustainability written by Michel Biron and published by William Andrew. This book was released on 2020-04-18 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Plastics Sustainability: Concept, Solutions, and Implementation is a groundbreaking reference work offering a broad, detailed and highly practical vision of the complex concept of sustainability in plastics. The book's aim is to present a range of potential pathways towards more sustainable plastics parts and products, enabling the reader to further integrate the idea of sustainability into their design process. It begins by introducing the context and concept of sustainability, discussing perceptions, drivers of change, key factors, and environmental issues, before presenting a detailed outline of the current situation with types of plastics, processing, and opportunities for improved sustainability. Subsequent chapters focus on the different possibilities for improved sustainability, offering a step-by-step technical approach to areas including design, properties, renewable plastics, and recycling and re-use. Each of these pillars are supported by data, examples, analysis and best practice guidance. Finally, the latest developments and future possibilities are considered. - Approaches the idea of sustainability from numerous angles, offering practical solutions to improve sustainability in the development of plastic components and products - Explains how sustainability can be applied across plastics design, materials selection, processing, and end of life, all set alongside socioeconomic factors - Considers key areas of innovation, such as eco-design, novel opportunities for recycling or re-use, bio-based polymers and new technologies
Download or read book Harvesting Rainwater from Buildings written by Syed Azizul Haq, PEng and published by Springer. This book was released on 2016-12-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book describes in detail all aspects of rainwater harvesting, including the basic concepts, procedures, opportunities and practice of rainwater harvesting mainly focusing its application in buildings of various occupancies and sizes. It provides a user-friendly methodology for the planning, design, construction and maintenance of rainwater harvesting infrastructure, in buildings and its premise, as a supplement to conventional water supplies. It highlights the application of plumbing technology, which is an important aspect of rainwater harvesting in buildings. It also includes global rainfall scenario and brief notes on all the elements of rainwater harvesting used in buildings. It is a valuable reference resource for policy and decision-makers, as well as for engineers, architects and students.
Download or read book Plastics and Sustainable Piping Systems written by David A. Chasis and published by . This book was released on 2014 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic piping is now the preferred material in countless applications -- municipal water and sewer lines,drain/waste/vent lines, and chemical waste drainage, to mention just a few -- because plastics are durable, easy and safe to install, environmentally sound, and cost-effective. This compendium of over 40 articles is written by a professional involved in plastic fluid handling products for over 45 years.
Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.
Download or read book International sustainability criteria for plastic products in a global agreement on plastic pollution written by Rognerud, Idun and published by Nordic Council of Ministers. This book was released on 2022-01-24 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2022-509/ The report elaborates on what sustainability criteria for plastic products may entail in a global agreement on plastic pollution. It proposes an analytical framework for sustainability criteria, situating them as the link between global objectives and implementation measures. It discusses how sustainability criteria may be incorporated in a global agreement and what operational measures can contribute to their fulfilment, emphasising that there is no one overarching criterion for sustainable production and consumption of plastic products. Rather, a range of criteria may collectively contribute towards more sustainable production, consumption, and management of plastic products throughout their lifecycle. The report further highlights the importance of considering risks of problem-shifting in the design and integration of sustainability criteria in a global agreement.
Download or read book Plastic Pipe and Fittings written by Thomas S. Walsh and published by . This book was released on 2011-01-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainability in Engineering Design and Construction written by J. K. Yates and published by CRC Press. This book was released on 2018-09-03 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully Measure the Benefits of Green Design and Construction Sustainability in Engineering Design and Construction outlines the sustainable practices used in engineering design and construction operations for all types of engineering and construction projects. Aimed at ushering the engineering and construction industry into embracing sustainable practices and green construction techniques, this book addresses sustainability in engineering design and construction operations from a historical and global perspective, and delves into specific sustainability concepts and processes. The book explains the concepts of sustainable development, corporate social responsibility (CSR), the Dow Jones Global Sustainability Index (DJGSI), key performance indicators (KPIs), corporate sustainability, and the triple bottom line (economic, environmental, and social values in design and construction). Relevant to sustainability in every facet of engineering and construction, it also covers life-cycle environmental cost analysis, discusses sustainable engineering and site selection, the economic considerations evaluated when making sustainability decisions, and explains how to measure and quantify sustainable performance and apply these practices in the real world. It also covers project and corporate level sustainability practices, sustainable construction materials and processes, sustainable heavy construction equipment, traditional and alternative energy sources, provides implementation resources for starting and evaluating sustainability programs, and includes a checklist for measuring the sustainability of construction operations. The text contains detailed information on sustainable construction materials and processes, heavy construction equipment, and traditional and alternative energy sources. It presents information on sustainable designs, selecting sustainable sites, designing for passive survivability, designing for disassembly, and the ISO 14,000 standards. It provides implementation resources for starting and evaluating sustainability programs and a checklist for measuring the sustainability of construction operations In addition, it provides definitions of sustainability terms and expressions, as well as case studies, examples, discussion questions, and a list of supplemental references at the end of each chapter. This book provides information on: Definitions for sustainability terms Sources for locating global sustainability requirements Current sustainability issues Environmental laws related to sustainability and their implications Sustainable design Life-cycle cost assessment models Sustainable practices currently being used in the engineering and construction (E&C) industry Corporate-level sustainability practices Project-level sustainability practices Global sustainability trends and implications Sustainable materials Sustainable heavy construction equipment Traditional and alternative energy sources LEED Green Building Rating System Sustainability organizations and certification programs Sustainability implementation resources A summary of sustainable engineering design and construction
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
