Download or read book Plastics and Molded Products written by and published by . This book was released on 1925 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Catalog ... directory", forming the October number from 1936 to 1939 was replaced by "Modern plastics catalog" (separately issued) 1941-

Download or read book Plastic Part Design for Injection Molding written by Robert A. Malloy and published by . This book was released on 2011 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.

Download or read book Plastics and Molded Products written by and published by . This book was released on 1927 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Catalog ... directory", forming the October number from 1936 to 1939 was replaced by "Modern plastics catalog" (separately issued) 1941-

Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.

Download or read book Plastic Injection Molding Manufacturing Startup and Management written by Douglas M. Bryce and published by Society of Manufacturing Engineers. This book was released on 1999 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book in the Plastics Injection Molding series addresses the many facets of running a molding company including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a company operates in the red or is profitable. This book also includes a benchmarking feature that allows decision-makers to gauge their company's competitiveness in comparison to the top 50 molders in the United States.

Download or read book The Story of Plastic Molding written by Chicago Molded Products Corporation and published by . This book was released on 1945 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Complete Part Design Handbook written by E. Alfredo Campo and published by Hanser Publications. This book was released on 2006 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook was written for the injection molding product designer who has a limited knowledge of engineering polymers. It is a guide for the designer to decide which resin and design geometries to use for the design of plastic parts. It can also offer knowledgeable advice for resin and machine selection and processing parameters. Manufacturer and end user satisfaction is the ultimate goal.

Download or read book Plastic Product Design written by Ronald D. Beck and published by . This book was released on 1980 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastic Component Design written by Paul D. Q. Campbell and published by Industrial Press Inc.. This book was released on 1996 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.

Download or read book Rotational Moulding of Plastics written by Roy James Crawford and published by Taylor & Francis Group. This book was released on 1996 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Within the last ten to fifteen years there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. For its second edition, this book has been updated and expanded by the authors, who are leaders in their specialties within the field of rotational moulding. It continues to provide an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. Two new chapters have been added. These cover the important areas of pin-hole removal from rotomoulded products and the rotational moulding of liquid polymers. In both cases the new material is the result of extensive research, and the results will be of considerable practical interest to moulders. The book will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses.

Download or read book Plastics Injection Molding written by José R. Lerma Valero and published by . This book was released on 2019-12-09 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Injection Molding: Scientific Molding, Recommendations, and Best Practices is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. It includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials.

Download or read book Blow Molding Handbook written by Dominick V. Rosato and published by . This book was released on 2004 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every successful manufacturer of blow molded products faces the challenge of utilizing advanced techniques which demand an understanding of the different plastic melt flow behaviors, operational monitoring and control systems, testing and quality control, statistical analysis, and so on. However, these techniques are only helpful if the basic operations of molding are understood to ensure the elimination or a significant reduction of potential problems. This second edition of Blow Molding Handbook - an industry standard for more than a decade - provides insight to critical areas such as: product design meeting performance requirements reducing costs zero defect targets The information contained in this volume is of value to even the most experienced fabricators, designers, and engineers; it also provides a firm basis for the beginner. The intent is to provide a complete review of the important aspects of the blow molding process that goes from the practical to the theoretical, and from the elementary to the advanced.

Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by Elsevier. This book was released on 2021-08-17 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts

Download or read book Plastic Product Material and Process Selection Handbook written by Dominick V Rosato and published by Elsevier. This book was released on 2004-08-04 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book.*Essential for people involved in working with plastic material and plastic fabricating processes *Will help readers understand the performance of plastics *Helps readers to make decisions which meet performance requirements and to keep costs low

Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the 'big picture' product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. - Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture - Enables designers to establish a solid foundation for new product development on the 'four pillars' of the process: materials, processes, tooling, and design - Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization

Download or read book Manufacturing Processes plastics written by Donald J. Jambro and published by Prentice Hall. This book was released on 1976 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the materials, processes, and products of the plastics industry, one of the fastest-growing industries in the United States.

Download or read book Handbook of Molded Part Shrinkage and Warpage written by Jerry Fischer and published by William Andrew. This book was released on 2012-12-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by