Download or read book Thermoplastic Elastomers written by Chapal Kumar Das and published by BoD – Books on Demand. This book was released on 2015-11-26 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic elastomers (TPEs), commonly known as thermoplastic rubbers, are a category of copolymers having thermoplastic and elastomeric characteristics. A TPE is a rubbery material with properties very close to those of conventional vulcanized rubber at normal conditions. It can be processed in a molten state even at elevated temperatures. TPEs show advantages typical of both rubbery materials and plastic materials. TPEs are a class of polymers bridging between the service properties of elastomers and the processing properties of thermoplastics. Nowadays, the best use of thermoplastics is in the field of biomedical applications, starting from artificial skin to many of the artificial human body parts. Apart from these, thermoplastic elastomers are being used for drug encapsulation purposes, and since they are biocompatible in many cases, their scope of applications has been broadened in the biotechnological field as well. The present book highlights many biological and biomedical applications of TPEs from which the broader area readers will benefit.

Download or read book Advances in Thermoplastic Elastomers written by Nikhil K. Singha and published by Elsevier. This book was released on 2024-01-24 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Thermoplastic Elastomers: Challenges and Opportunities brings together the state-of-the-art in thermoplastic elastomers (TPEs), covering innovative materials, synthesis techniques, processing methods and sustainability. Sections outline thermoplastic elastomers, rubber elastic, and thermoplastic vulcanizates, and review the current landscape, from research and published literature, to commercialization and patents. Subsequent chapters offer methodical coverage of different categories of advanced thermoplastic elastomer materials, including areas such as polyolefin-based TPEs and high performance TPEs. The final chapters in the book examine options for sustainability, including bio-based, bio-resourced, and biodegradable TPEs, as well as circular economy and recycling of TPEs.Finally, outlook and future market and research trends are reviewed. This is a valuable book for researchers and advanced students working with elastomers, polymer science, materials chemistry, and materials engineering. In an industrial setting, this is an essential resource for R&D professionals, scientists, and engineers looking to utilize thermoplastic elastomers in a range of advanced applications. - Focuses on novel materials, such as polyolefin-based TPEs, fluorinated TPEs, silicone-based TPEs, and ionic TPEs - Discusses sustainability in terms of bio-based or biocompatible TPEs, recycling and the circular economy - Helps bridge the gap between research and commercialization, reviewing patents, literature, trends, and market.

Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. - Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs - Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers - Includes data on additional materials and applications, particularly in automotive and medical industries

Download or read book Polymer Blends and Composites written by John A. Manson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for writing a monograph on polymer blends and composites became apparent during presentation of material on this subject to our advanced polymers class. Although the flood of important research in this area in the past decade has resulted in many symposia, edited collections of papers, reviews, contributions to scientific journals, and patents, apparently no organized presentation in book form has been forthcoming. In a closely connected way, another strong impetus for writing this monograph arose out of our research programs in the Materials Research Center at Lehigh University. As part of this effort, we had naturally compiled hundreds of references and become acquainted with many leaders in the field of blend and composite research. Perhaps the most important concept stressed over and over again is that engineering materials are useful because of their complexity, not in spite of it. Blends and composites are toughened because many modes of resistance to failure are available. Although such multimechanism processes are diffi cult to describe with a unified theory. we have presented available develop ments in juxtaposition with the experimental portions. The arguments somewhat resemble the classical discussion of resonance in organic chemistry, where molecular structures increase in stability as more electronic configura tions become available.

Download or read book Thermoplastic Elastomers from Rubber plastic Blends written by S. K. De and published by Prentice Hall. This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.

Download or read book Advanced Elastomers written by Anna Boczkowska and published by BoD – Books on Demand. This book was released on 2012-09-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an extensive overview of current trends in the area of elastomers and their composites from the chapters contributed by internationally recognized specialists. The book deals with novel synthesis, modelling and experimental methods in elastomers. Contents include: new approach to crosslinking, liquid crystal elastomers, nanocomposites, smart elastomers, elastomers in microelectronics and microfluidics, elastomers in cement concrete and mortar, experimental testing and modelling. Each section demonstrates how enhancements in materials, processes and characterization techniques can improve performance in the field of engineering. The book provides a unique opportunity to discover the latest research on elastomer advances from laboratories around the world. This book addresses to industrial and academic researchers in the fields of physical, chemical, biological sciences and engineering.

Download or read book Natural Rubber Materials written by Sabu Thomas and published by Royal Society of Chemistry. This book was released on 2013-11-27 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of its unique morphology, physical properties, cost effectiveness and environmental friendliness make natural rubber an appealing constituent for many materials and applications. This comprehensive two volume set covers the synthesis, characterization and applications of natural rubber based blends, interpenetrating polymer networks, composites and nanocomposites. Volume 1 covers different types of natural rubber-based blends and IPNs as well as manufacturing methods, thermo mechanical characterization techniques, life cycle analysis and their applications. Volume 2 focuses on natural rubber-based composites and Nanocomposites including the different types of fillers, the filler-matrix reinforcement mechanisms, manufacturing techniques, and applications. This is the first book to consolidate the current state of the art information on natural rubber based materials with contributions from established international experts in the field. The book provides a "one stop" reference resource for professionals, researchers, industrial practitioners, graduate students, and senior undergraduates in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering.

Download or read book Polyurethane Elastomers written by Cristina Prisacariu and published by Springer Science & Business Media. This book was released on 2011-07-03 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the physical / mechanical behaviour of polyurethanes (PU ́s) elastomers, films and blends of variable crystallinity. Aspects covered include the elasticity and inelasticity of amorphous to crystalline PUs, in relation to their sensitivity to chemical and physical structure. A study is made of how aspects of the constitutive responses of PUs vary with composition: the polyaddition procedure, the hard segment, soft segment and chain extender (diols and diamines) are varied systematically in a large number of systems of model and novel crosslinked andthermoplastic PUs. Results will be related to: microstructural changes, on the basis of evidence from x-ray scattering (SAXS and WAXS), and also dynamic mechanical analyses (DMA), differential scanning calorimetry (DSC) and IR dichroism. Inelastic effects will be investigated also by including quantitative correlations between the magnitude of the Mullins effect and the fractional energy dissipation by hysteresis under cyclic straining, giving common relations approached by all the materials studied. A major structural feature explored is the relationship between the nature of the hard segment (crystallising or not) and that of the soft segments. Crystallinity has been sometimes observed in the commercial PUs hard phase but this is usually limited to only a few percent for most hard segment structures when solidified from the melt. One particular diisocyanate, 4,4’-dibenzyl diisocyanate (DBDI) that, in the presence of suitable chain extenders ( diols or diamines), gives rise to significant degrees of crystallinity [i-iii] and this is included in the present work. Understanding the reaction pathways involved, in resolving the subtle morphological evolution at the nanometre level, and capturing mathematically the complex, large-deformation nonlinear viscoelastic mechanical behaviour are assumed to bring new important insights in the world basic research in polyurethanes and towards applied industrial research in this area.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Handbook of Elastomers Second Edition written by Anil K. Bhowmick and published by CRC Press. This book was released on 2000-11-02 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides the latest authoritative research on the developments, technology, and applications of rubbery materials. Presents structures, manufacturing techniques, and processing details for natural and synthetic rubbers, rubber-blends, rubber composites, and thermoplastic elastomers. 80% revised and rewritten material covers major advances since publication of the previous edition."

Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.

Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book High Performance Polymers Polyimides Based written by Marc Abadie and published by BoD – Books on Demand. This book was released on 2012-12-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feature of polyimides and other heterocyclic polymers are now well-established and used for long term temperature durability in the range of 250 - 350'C. This book will review synthesis, mechanisms, ultimate properties, physico-chemical properties, processing and applications of such high performance materials needed in advanced technologies. It presents interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research. The volume contains eleven chapters divided into three sections: Chemistry; Chemical and Physical Properties; and Applications.

Download or read book Understanding Thermoplastic Elastomers written by Geoffrey Holden and published by Hanser Gardner Publications. This book was released on 2000 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the outstanding advantages of TPE's can be summarized in a single phrase: They allow rubberlike articles to be produced using the rapid processing techniques developed by the thermoplastic industry.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.